diff options
Diffstat (limited to 'sys-kernel/linux-firmware/linux-firmware-20240709.ebuild')
| -rw-r--r-- | sys-kernel/linux-firmware/linux-firmware-20240709.ebuild | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/sys-kernel/linux-firmware/linux-firmware-20240709.ebuild b/sys-kernel/linux-firmware/linux-firmware-20240709.ebuild new file mode 100644 index 000000000000..2b7db9344104 --- /dev/null +++ b/sys-kernel/linux-firmware/linux-firmware-20240709.ebuild @@ -0,0 +1,396 @@ +# Copyright 1999-2024 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 +inherit dist-kernel-utils linux-info mount-boot savedconfig + +# In case this is a real snapshot, fill in commit below. +# For normal, tagged releases, leave blank +MY_COMMIT="" + +if [[ ${PV} == 99999999* ]]; then + inherit git-r3 + EGIT_REPO_URI="https://git.kernel.org/pub/scm/linux/kernel/git/firmware/${PN}.git" +else + if [[ -n "${MY_COMMIT}" ]]; then + SRC_URI="https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/snapshot/${MY_COMMIT}.tar.gz -> ${P}.tar.gz" + S="${WORKDIR}/${MY_COMMIT}" + else + SRC_URI="https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/${P}.tar.xz" + fi + + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86" +fi + +DESCRIPTION="Linux firmware files" +HOMEPAGE="https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git" + +LICENSE="GPL-2 GPL-2+ GPL-3 BSD MIT || ( MPL-1.1 GPL-2 ) + redistributable? ( linux-fw-redistributable BSD-2 BSD BSD-4 ISC MIT ) + unknown-license? ( all-rights-reserved )" +SLOT="0" +IUSE="bindist compress-xz compress-zstd deduplicate dist-kernel +initramfs +redistributable savedconfig unknown-license" +REQUIRED_USE="initramfs? ( redistributable ) + ?? ( compress-xz compress-zstd ) + savedconfig? ( !deduplicate )" + +RESTRICT="binchecks strip test + !bindist? ( bindist ) + unknown-license? ( bindist )" + +BDEPEND="initramfs? ( app-alternatives/cpio ) + compress-xz? ( app-arch/xz-utils ) + compress-zstd? ( app-arch/zstd ) + deduplicate? ( app-misc/rdfind )" + +#add anything else that collides to this +RDEPEND="!savedconfig? ( + redistributable? ( + !sys-firmware/alsa-firmware[alsa_cards_ca0132] + !sys-block/qla-fc-firmware + !sys-firmware/raspberrypi-wifi-ucode + ) + unknown-license? ( + !sys-firmware/alsa-firmware[alsa_cards_korg1212] + !sys-firmware/alsa-firmware[alsa_cards_maestro3] + !sys-firmware/alsa-firmware[alsa_cards_sb16] + !sys-firmware/alsa-firmware[alsa_cards_ymfpci] + ) + ) + dist-kernel? ( virtual/dist-kernel ) +" +IDEPEND=" + dist-kernel? ( + initramfs? ( sys-kernel/installkernel ) + ) +" + +QA_PREBUILT="*" +PATCHES=( "${FILESDIR}"/${PN}-copy-firmware-r4.patch ) + +pkg_pretend() { + if use initramfs; then + if [[ -z ${ROOT} ]] && use dist-kernel; then + # Check, but don't die because we can fix the problem and then + # emerge --config ... to re-run installation. + nonfatal mount-boot_check_status + else + mount-boot_pkg_pretend + fi + fi +} + +pkg_setup() { + if use compress-xz || use compress-zstd ; then + local CONFIG_CHECK + + if kernel_is -ge 5 19; then + use compress-xz && CONFIG_CHECK="~FW_LOADER_COMPRESS_XZ" + use compress-zstd && CONFIG_CHECK="~FW_LOADER_COMPRESS_ZSTD" + else + use compress-xz && CONFIG_CHECK="~FW_LOADER_COMPRESS" + if use compress-zstd; then + eerror "Kernels <5.19 do not support ZSTD-compressed firmware files" + fi + fi + fi + linux-info_pkg_setup +} + +src_unpack() { + if [[ ${PV} == 99999999* ]]; then + git-r3_src_unpack + else + default + # rename directory from git snapshot tarball + if [[ ${#GIT_COMMIT} -gt 8 ]]; then + mv ${PN}-*/ ${P} || die + fi + fi +} + +src_prepare() { + default + + find . -type f -not -perm 0644 -print0 \ + | xargs --null --no-run-if-empty chmod 0644 \ + || die + + chmod +x copy-firmware.sh || die + cp "${FILESDIR}/${PN}-make-amd-ucode-img.bash" "${T}/make-amd-ucode-img" || die + chmod +x "${T}/make-amd-ucode-img" || die + + if use initramfs && ! use dist-kernel; then + if [[ -d "${S}/amd-ucode" ]]; then + "${T}/make-amd-ucode-img" "${S}" "${S}/amd-ucode" || die + else + # If this will ever happen something has changed which + # must be reviewed + die "'${S}/amd-ucode' not found!" + fi + fi + + # whitelist of misc files + local misc_files=( + copy-firmware.sh + README.md + WHENCE + LICEN[CS]E.* + ) + + # whitelist of images with a free software license + local free_software=( + # keyspan_pda (GPL-2+) + keyspan_pda/keyspan_pda.fw + keyspan_pda/xircom_pgs.fw + # dsp56k (GPL-2+) + dsp56k/bootstrap.bin + # ath9k_htc (BSD GPL-2+ MIT) + ath9k_htc/htc_7010-1.4.0.fw + ath9k_htc/htc_9271-1.4.0.fw + # pcnet_cs, 3c589_cs, 3c574_cs, serial_cs (dual GPL-2/MPL-1.1) + cis/LA-PCM.cis + cis/PCMLM28.cis + cis/DP83903.cis + cis/NE2K.cis + cis/tamarack.cis + cis/PE-200.cis + cis/PE520.cis + cis/3CXEM556.cis + cis/3CCFEM556.cis + cis/MT5634ZLX.cis + cis/RS-COM-2P.cis + cis/COMpad2.cis + cis/COMpad4.cis + # serial_cs (GPL-3) + cis/SW_555_SER.cis + cis/SW_7xx_SER.cis + cis/SW_8xx_SER.cis + # dvb-ttpci (GPL-2+) + av7110/bootcode.bin + # usbdux, usbduxfast, usbduxsigma (GPL-2+) + usbdux_firmware.bin + usbduxfast_firmware.bin + usbduxsigma_firmware.bin + # brcmfmac (GPL-2+) + brcm/brcmfmac4330-sdio.Prowise-PT301.txt + brcm/brcmfmac43340-sdio.meegopad-t08.txt + brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt + brcm/brcmfmac43362-sdio.lemaker,bananapro.txt + brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt + "brcm/brcmfmac43430a0-sdio.ONDA-V80 PLUS.txt" + brcm/brcmfmac43430-sdio.AP6212.txt + brcm/brcmfmac43430-sdio.Hampoo-D2D3_Vi8A1.txt + brcm/brcmfmac43430-sdio.MUR1DX.txt + brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt + brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt + brcm/brcmfmac4356-pcie.gpd-win-pocket.txt + # isci (GPL-2) + isci/isci_firmware.bin + # carl9170 (GPL-2+) + carl9170-1.fw + # atusb (GPL-2+) + atusb/atusb-0.2.dfu + atusb/atusb-0.3.dfu + atusb/rzusb-0.3.bin + # mlxsw_spectrum (dual BSD/GPL-2) + mellanox/mlxsw_spectrum-13.1420.122.mfa2 + mellanox/mlxsw_spectrum-13.1530.152.mfa2 + mellanox/mlxsw_spectrum-13.1620.192.mfa2 + mellanox/mlxsw_spectrum-13.1702.6.mfa2 + mellanox/mlxsw_spectrum-13.1703.4.mfa2 + mellanox/mlxsw_spectrum-13.1910.622.mfa2 + mellanox/mlxsw_spectrum-13.2000.1122.mfa2 + ) + + # blacklist of images with unknown license + local unknown_license=( + korg/k1212.dsp + ess/maestro3_assp_kernel.fw + ess/maestro3_assp_minisrc.fw + yamaha/ds1_ctrl.fw + yamaha/ds1_dsp.fw + yamaha/ds1e_ctrl.fw + ttusb-budget/dspbootcode.bin + emi62/bitstream.fw + emi62/loader.fw + emi62/midi.fw + emi62/spdif.fw + ti_3410.fw + ti_5052.fw + mts_mt9234mu.fw + mts_mt9234zba.fw + whiteheat.fw + whiteheat_loader.fw + cpia2/stv0672_vp4.bin + vicam/firmware.fw + edgeport/boot.fw + edgeport/boot2.fw + edgeport/down.fw + edgeport/down2.fw + edgeport/down3.bin + sb16/mulaw_main.csp + sb16/alaw_main.csp + sb16/ima_adpcm_init.csp + sb16/ima_adpcm_playback.csp + sb16/ima_adpcm_capture.csp + sun/cassini.bin + acenic/tg1.bin + acenic/tg2.bin + adaptec/starfire_rx.bin + adaptec/starfire_tx.bin + yam/1200.bin + yam/9600.bin + ositech/Xilinx7OD.bin + qlogic/isp1000.bin + myricom/lanai.bin + yamaha/yss225_registers.bin + lgs8g75.fw + ) + + if use !unknown-license; then + einfo "Removing files with unknown license ..." + rm -v "${unknown_license[@]}" || die + fi + + if use !redistributable; then + # remove files _not_ in the free_software or unknown_license lists + # everything else is confirmed (or assumed) to be redistributable + # based on upstream acceptance policy + einfo "Removing non-redistributable files ..." + local OLDIFS="${IFS}" + local IFS=$'\n' + set -o pipefail + find ! -type d -printf "%P\n" \ + | grep -Fvx -e "${misc_files[*]}" -e "${free_software[*]}" -e "${unknown_license[*]}" \ + | xargs -d '\n' --no-run-if-empty rm -v + + [[ ${?} -ne 0 ]] && die "Failed to remove non-redistributable files" + + IFS="${OLDIFS}" + fi + + restore_config ${PN}.conf +} + +src_install() { + + local FW_OPTIONS=( "-v" ) + local files_to_keep= + + if use savedconfig; then + if [[ -s "${S}/${PN}.conf" ]]; then + files_to_keep="${T}/files_to_keep.lst" + grep -v '^#' "${S}/${PN}.conf" 2>/dev/null > "${files_to_keep}" || die + [[ -s "${files_to_keep}" ]] || die "grep failed, empty config file?" + FW_OPTIONS+=( "--firmware-list" "${files_to_keep}" ) + fi + fi + + if use compress-xz; then + FW_OPTIONS+=( "--xz" ) + elif use compress-zstd; then + FW_OPTIONS+=( "--zstd" ) + fi + ! use deduplicate && FW_OPTIONS+=( "--ignore-duplicates" ) + FW_OPTIONS+=( "${ED}/lib/firmware" ) + ./copy-firmware.sh "${FW_OPTIONS[@]}" || die + + pushd "${ED}/lib/firmware" &>/dev/null || die + + # especially use !redistributable will cause some broken symlinks + einfo "Removing broken symlinks ..." + find * -xtype l -print -delete || die + + # remove empty directories, bug #396073 + find -type d -empty -delete || die + + # sanity check + if ! ( shopt -s failglob; : * ) 2>/dev/null; then + eerror "No files to install. Check your USE flag settings" + eerror "and the list of files in your saved configuration." + die "Refusing to install an empty package" + fi + + # create config file + echo "# Remove files that shall not be installed from this list." > "${S}"/${PN}.conf || die + find * ! -type d >> "${S}"/${PN}.conf || die + save_config "${S}"/${PN}.conf + + popd &>/dev/null || die + + # Instruct Dracut on whether or not we want the microcode in initramfs + ( + insinto /usr/lib/dracut/dracut.conf.d + newins - 10-${PN}.conf <<<"early_microcode=$(usex initramfs)" + ) + if use initramfs; then + # Install installkernel/kernel-install hooks for non-dracut initramfs + # generators that don't bundled the microcode + dobin "${T}/make-amd-ucode-img" + ( + exeinto /usr/lib/kernel/preinst.d + doexe "${FILESDIR}/35-amd-microcode.install" + exeinto /usr/lib/kernel/install.d + doexe "${FILESDIR}/35-amd-microcode-systemd.install" + ) + fi + + if use initramfs && ! use dist-kernel; then + insinto /boot + doins "${S}"/amd-uc.img + fi + + dodoc README.md + # some licenses require copyright and permission notice to be included + use bindist && dodoc WHENCE LICEN[CS]E.* +} + +pkg_preinst() { + if use savedconfig; then + ewarn "USE=savedconfig is active. You must handle file collisions manually." + fi + + # Fix 'symlink is blocked by a directory' Bug #871315 + if has_version "<${CATEGORY}/${PN}-20220913-r2" ; then + rm -rf "${EROOT}"/lib/firmware/qcom/LENOVO/21BX + fi + + # Make sure /boot is available if needed. + use initramfs && ! use dist-kernel && mount-boot_pkg_preinst +} + +pkg_postinst() { + elog "If you are only interested in particular firmware files, edit the saved" + elog "configfile and remove those that you do not want." + + local ver + for ver in ${REPLACING_VERSIONS}; do + if ver_test ${ver} -lt 20190514; then + elog + elog 'Starting with version 20190514, installation of many firmware' + elog 'files is controlled by USE flags. Please review your USE flag' + elog 'and package.license settings if you are missing some files.' + break + fi + done + + if use initramfs; then + if [[ -z ${ROOT} ]] && use dist-kernel; then + dist-kernel_reinstall_initramfs "${KV_DIR}" "${KV_FULL}" + else + # Don't forget to umount /boot if it was previously mounted by us. + mount-boot_pkg_postinst + fi + fi +} + +pkg_prerm() { + # Make sure /boot is mounted so that we can remove /boot/amd-uc.img! + use initramfs && ! use dist-kernel && mount-boot_pkg_prerm +} + +pkg_postrm() { + # Don't forget to umount /boot if it was previously mounted by us. + use initramfs && ! use dist-kernel && mount-boot_pkg_postrm +} |