diff options
Diffstat (limited to 'net-mail/qpopper/files/qpopper.conf')
| -rw-r--r-- | net-mail/qpopper/files/qpopper.conf | 679 |
1 files changed, 0 insertions, 679 deletions
diff --git a/net-mail/qpopper/files/qpopper.conf b/net-mail/qpopper/files/qpopper.conf deleted file mode 100644 index 8ce96875c520..000000000000 --- a/net-mail/qpopper/files/qpopper.conf +++ /dev/null @@ -1,679 +0,0 @@ -#--------------------------------------------------------------------- -# Sample Qpopper 4.0 configuration file. -# -# This file lists all Qpopper configuration file options. To use, -# copy the desired setting to your own configuration file, remove -# the leading '#' and set the desired value. -# -#--------------------------------------------------------------------- - - - -# An integer value for the number of seconds to announce in -# the CAPA response for the server's minimum login delay. -# -# Default: -# -# set announce-login-delay = - - -# An integer value for the number of days to announce in -# the CAPA response for the server's maximum message -# retention period. -# -# Default: -# -# set announce-expire = - - -# The full path to the bulletins directory. -# -# Default: /var/spool/bulls -# -# set bulldir = "/var/spool/bulls" - - -# Set TRUE to permit sessions to continue even if the -# bulletins database can't be accessed. This permits -# users to get their mail, but they might not see some -# bulletins for a while, or at all. -# -# Only valid when compiled with '--enable-bulldb'. -# -# Default: false. -# -# set bulldb-nonfatal = false - - -# Sets the maximum number of attempts to lock the bulletins -# database. You normally do not need to adjust this. This value -# should only be changed if you know if your system has usleep(3C) -# or not. On systems with usleep(3C), this can be a large value -# (the default is 75). On systems without usleep(3C), this should -# remain small (the default is 10). -# -# Only valid when compiled with '--enable-bulldb'. -# -# Default: 75 (10 on systems without usleep(3c)). -# -# set bulldb-max-tries = 75 - - -# Sets clear text handling options. Values are: -# o 'default' Clear text passwords are permitted for all users, -# except those in the APOP database -# o 'never' Clear text passwords are never permitted -# o 'always' Clear text passwords are always permitted -# o 'local' Clear text passwords are permitted on the local -# (127.*.*.*) loop back interface only -# o 'tls' Clear text passwords are permitted when TLS/SSL -# has been negotiated for the session -# o 'ssl' Same as tls -# -# The 'tls' and 'ssl' values are only valid if '--with-openssl' or -# '--with-sslplus' was used with ./configure. -# -# Default: default -# -# set clear-text-password = default - - -# Reads additional run-time options from the specified file. -# -# Caution. There are no restrictions on which options may -# appear in files specified with the '-f' command-line flag -# or the 'config-file' configuration file option in files -# chained from -f. Be certain that the file specified with -# '-f' or in any files it chains to are not writable by -# users. -# -# Default: none -# -# set config-file = /etc/mail/pop/qpopper.config - - -# Enables debug logging. Output is in syslog. If this option is used, -# it should be first, so that debug records are generated for subsequent -# options. -# -# Only valid if ./configure was run with '--enable-debugging' -# -# Default: false -# -# set debug = false - - -# Changes uppercase user names to lowercase. This permits users to -# configure their clients with user names in UPPER or MiXeD case. -# They can then login, assuming their actual user name is all -# lowercase. -# -# Default: false -# -# set downcase-user = false - - -# If '--with-drac' used with ./configure, this option specifies the DRAC -# host. -# -# Default: localhost -# -# set drac-host = localhost - - -# Enables Kerberos support. -# -# Only valid if ./configure run with '--enable-kerberos5'. -# -# Default: false -# -# set kerberos = false - - -# Specifies the Kerberos service to use (same as the compile time -# KERBEROS_SERVICE define). The default is rcmd, although the use of -# pop is popular. -# -# Only valid if ./configure run with '--enable-kerberos5'. -# -# Default: rcmd -# -# set kerberos-service = "rcmd" - - -# Checks if mail lock needs to be refreshed every this many messages. -# -# You normally do not need to adjust this. See "Performance" in the -# Qpopper Administrator's Guide for more information. -# -# Default: -# -# set mail-lock-check = - - -# Disables the reverse lookups on client IP addresses. -# -# Default: true -# -# set reverse-lookup = true - - -# Enables server mode by default. See the Qpopper Administrator's -# Guide for more information. -# -# Default: false -# -# set server-mode = false - - -# Enables statistics logging. After each session ends, a statistics -# record is written to the log. This record resembles the following -# example: 'stats randy 0 0 1 385 randy.example.org 192.168.2.4' and -# has the following meaning: -# Username: 'randy' -# Deleted messages: 0 -# Deleted octets: 0 -# Messages left on server: 1 -# Octets left on server: 385 -# Name of client machine: 'randy.example.org' -# IP address of client machine: '192.168.2.4' -# -# Default: false -# -# set statistics = false - - -# Sets the timeout for network reads. Qpopper terminates the -# connection with the client if no input is received in this -# many seconds. RFC 1939 states that this timeout must be -# 600 seconds (10 minutes). However, ideal settings in some -# cases are between 30 and 120 seconds. In other cases the 600 -# value is best, and sometimes a value in between is better. -# -# Default: 120 -# -# set timeout = 120 - - -# Enables debug logging if '--enable-debugging' was used with -# ./configure. All debug and standard log records are written to -# the specified file. If this option is used, it should be first, -# so that debug records are generated for subsequent options. -# -# If used without '--enable-debugging', redirects all log messages -# to the specified file but does not enable debug logging. -# -# Default: none -# -# set tracefile = - - -# Reads additional run-time options from a file named -# '.qpopper-options' in the user's home directory, if present. -# -# This file is normally owned by the user. -# -# Default: false -# -# set user-options = false - - -# Reads additional run-time options from a file named -# 'username.qpopper-options' in the spool directory. -# -# This file should not be owned by nor writable by the user. -# -# Default: false -# -# set spool-options = false - - -# When updating the spool at the end of a session, this option -# instructs Qpopper to rename the temporary file to the spool instead -# of copying it. This reduces I/O at session end by a third, but is -# likely to break programs such as biff or the shell's mail check -# feature. Use this option only if such programs are not used. It is -# safest to only enable this option when users do not have shell -# access to the mail server. -# -# See "Performance" in the Qpopper Administrator's Guide for more -# information. -# -# Default: false -# -# set fast-update = false - - -# When set, domains are trimmed from user names before use. For -# example, if a user named 'maida' enters her login name in her POP -# client as 'maida@example.org', Qpopper treats this as just 'maida'. -# -# Default: false -# -# set trim-domain = false - - -# Specifies TLS/SSL support. The permitted values are: -# o 'default' TLS/SSL is not supported -# o 'none' Same as default -# o 'stls' Enables support for the STLS command. This -# permits TLS/SSL negotiations on the -# standard (or any) port, allowing the same -# port to be used by TLS/SSL and regular -# clients. -# o 'alternate-port' Enables alternate-port TLS/SSL. Some older -# clients require this. (The usual port for -# alternate-port TLS/SSL with pop is 995.) -# -# Only valid when '--with-openssl' or '--with-sslplus' used with -# ./configure -# -# Default: default -# -# set tls-support = default - - -# Specifies the permitted cipher suites. See the OpenSSL documentation -# for syntax. You normally do not need to set this. -# -# Only valid when '--with-openssl' used with ./configure -# -# Default: -# -# set tls-cipher-list = - - -# Restricts the version of TLS/SSL recognized in session negotiations. -# You normally do not need to set this. Supported values are: -# o 'default' (same as SSLv23) -# o 'SSLv2' Forces Qpopper only to understand SSLv2 client hello -# messages. -# o 'SSLv3' Forces Qpopper only to understand SSLv3 client hello -# messages. This especially means that it does not -# understand SSLv2 client hello messages, which are -# widely used for compatibility reasons. -# o 'TLSv1' Forces Qpopper only to understand TLSv1 client hello -# messages. This especially means that it does not -# understand SSLv2 client hello messages, which are -# widely used for compatibility reasons. It also does -# not understand SSLv3 client hello messages. -# o 'SSLv23' Allows Qpopper to understand SSLv2, SSLv3, and TLSv1 -# client hello messages. This is the best choice when -# compatibility is a concern. This is the default -# value. -# o 'all' (same as SSLv23) -# -# Only valid when '--with-openssl' used with ./configure -# -# Default: default -# -# set tls-version = default - - -# Specifies the file containing the server's TLS/SSL certificate and -# encrypted private key. -# -# Only valid if '--with-sslplus' used with ./configure. -# -# Default: none -# -# set tls-identity-file = - - -# Specifies the passphrase to decrypt the server's private key (in the -# identify file). -# -# Only valid if '--with-sslplus' used with ./configure. -# -# Default: none -# -# set tls-passphrase = - - -# Specifies the file which contains the server's TLS/SSL certificate. -# This file may also contain the server's unencrypted private key. -# -# Only valid if '--with-openssl' used with ./configure -# -# Default: none -# -# -# set tls-server-cert-file = /etc/mail/certs/cert.pem - - -# Specifies a file which contains the server's TLS/SSL private key. -# Note: This private key must not be encrypted. -# -# If the private key is contained in the same file as the certificate -# (as specified with tls-server-cert-file), you do not need to set -# this option. -# -# Only valid if '--with-openssl' used with ./configure -# -# Default: none -# -# set tls-private-key-file = - - -# When set, Qpopper writes a log record at the end of a session -# containing the elapsed time for the session authentication, -# initialization. and cleanup. -# -# Default: false -# -# set timing = false - - -# When set, Qpopper checks for old .user.pop files in old locations -# when hash-spool or homedirmail is used. When reset, Qpopper skips -# this check, which speeds things up. -# -# Default: true -# -# set check-old-spool-loc = true - - -# When set, Qpopper checks for and creates if needed the hashed spool -# directories. When reset, Qpopper doesn't check for or create the -# hashed spool directories. Set to false if you precreate the -# directories. -# -# Default: true -# -# set check-hash-dir = true - - -# When set, Qpopper checks for expired passwords (if the platform -# permits). When reset, Qpopper omits this check. -# -# Default: true -# -# set check-password-expired = true - - -# Determines whether Qpopper updates the read/unread status of -# messages (a feature relied on by some mail clients). Also -# determines if Qpopper saves the message's unique identifier -# (UID) in the spool. -# -# When reset, it forces the UID for every message to be -# recalculated, using more CPU but potentially less I/O. -# -# See the "Performance" section of the Qpopper Administrator's Guide -# for more information. -# -# Default: true -# -# set update-status-headers = true - - -# Determines whether Qpopper enters update state when a session -# aborts. Resetting this option causes Qpopper to ignore any -# deletions if the session is aborted. -# -# Note that RFC 1939, section 6 prohibits the default behavior, -# but experience showed that otherwise users on noisy lines were -# often unable to delete their mail. Reset this option to inhibit -# the default behavior, and obey RFC 1939, but watch for users who -# download the same messages over and over, or whose spools fill up. -# -# Default: true -# -# set update-on-abort = true - - -# When set, Qpopper automatically and unconditionally deletes messages -# that have been downloaded using the RETR command (the normal command -# for accessing messages). -# -# Caution: This option could result in lost mail. Be sure to -# inform your users that the option is in effect before enabling. -# -# Default: false -# -# set auto-delete = false - - -# When set, Qpopper shows bulletins to users by groups (the group name -# is the second dot-separated element in each bulletin's name). See -# "Using Bulletins" in the Qpopper Administrator's Guide for more -# information. Use a group name of 'ALL' for all users. -# -# Default: false -# -# set group-bulletins = false - - -# When set to a 1 or 2, the subdirectory for the mail spools is -# determined from the user name by either (1) hashing the first four -# characters or (2) by using directories equal to the first letter and -# the second letter (if any). For example, if the spool directory is -# '/var/mail', the spool file for user 'maida' would be: -# '/var/mail/maida' hash-spool = 0 -# '/var/mail/o/maida' hash-spool = 1 -# '/var/mail/m/a/maida' hash-spool = 2 -# -# See the "Performance" section of the Qpopper Administrator's Guide -# for more information. -# -# Default: 0 -# -# set hash-spool = 0 - - -# To have the user's home directory be the spool location, set this -# option to be the correct file name for the spool. -# -# Default: none -# -# set home-dir-mail = ".mail" - - -# When set, instructs Qpopper to generate message unique identifiers -# (UIDs) using old (pre-3.x) style encoding. This is useful only if -# you also set 'update-status-headers' to false, have existing users -# with old (pre-3.x) spool files, and you want to keep the UIDs the -# same. -# -# Default: false -# -# set old-style-uid = false - - -# When set, Qpopper checks for and hides status messages created by -# University of Washington software. -# -# Default: false -# -# set UW-kluge = false - - -# When set, Qpopper keeps (does not delete) the '.user.pop' file (the -# temporary drop file). Normally this file is deleted when the -# session ends. Some sites like to retain it to determine the last -# time a user has accessed his or her mail. -# -# Default: false -# -# set keep-temp-drop = false - - -# When set, causes server mode to be on for users who are members of -# the specified group. See the "Enabling Server Mode" and -# "Performance" sections of the Qpopper Administrator's Guide for more -# information. -# -# Default: none -# -# set group-server-mode = - - -# When set, causes server mode to be off for users who are members of -# the specified group. See the "Enabling Server Mode" and -# "Performance" sections of the Qpopper Administrator's Guide for more -# information. -# -# Default: none -# -# set group-no-server-mode = - - -# Specifies a file that permits only users listed in the file to have -# Qpopper access. The format is a list of user names, one per line. -# -# Default: none -# -# set auth-file = - - -# Specifies a file that denies access to users listed in the file. -# The format is a list of user names, one per line. -# -# Default: none -# -# set nonauth-file = - - -# Set this option if you don't want Qpopper to display its version in -# the POP protocol banner or CAPA IMPLEMENTATION response of -# unauthenticated users. -# Some sites believe this improves security since it avoids advertising -# that an old version (perhaps with known vulnerabilities) is being -# used. Others feel is makes the site more likely to be attacked, -# since it also avoids advertising when running a secure version. -# -# Default: false -# -# set shy = false - - -# Set this to the full path to sendmail or other such program used to -# submit new messages. Qpopper uses this to implement XTND XMIT. -# -# The default is determined at compile time. -# -# -# set mail-command = /usr/sbin/sendmail - - -# Set this to the full path to the mail spool directory. -# -# The default is determined at compile time. -# -# set spool-dir = /var/spool/mail - - -# If you do not want '.user.pop' (temporary drop files) to be in the -# spool directory, set this to the full path to the directory to be -# used for temp drop files. Note that use of /tmp is not recommended, -# because a system reboot will wipe out the files. This could cause -# lost mail. -# -# Default: spool directory -# -# set temp-dir = - - -# The name of the temporary drop files. You should not normally set -# this option. -# -# Default: ".%s.pop" -# -# set temp-name = ".%s.pop" - - -# If you do not want user cache files to be in the same directory as -# temporary drop files, set this to the full path to the directory for -# cache files. Note that use of /tmp is not recommended, because a -# system reboot wipes out the files. -# -# Default: temp-dir -# -# set cache-dir = - - -# The name of the cache files. You should not normally set this -# option. -# -# Default: ".%s.cache" -# -# set cache-name = ".%s.cache" - - -# Specifies the maximum number of old bulletins seen by new users. -# -# Default: 1 -# -# set max-bulletins = 1 - - -# When set, Qpopper uses a method of opening lock files that may work -# over NFS. This has not been thoroughly tested, however. -# -# Default: false -# -# set no-atomic-open = false - - -# Qpopper sends network output to client in small chunks (for example, -# line-by-line when sending a message). By default, Qpopper -# aggregates data to be sent to clients in large chunks. This may be -# faster or slower, depending on specifics of both the client and -# server hardware and networking stacks as wel as network elements in -# between (such as routers). Also, some networking stacks do their -# own aggregation. -# -# Under congested network conditions, larger packets increase the -# incidence of lost packets and thus client or server timeouts, -# leading to "POP timeout" or "EOF" errors. -# -# When TLS/SSL is in effect, smaller packets increase the overhead -# needed to send data, which may result in worse performance. -# -# You can adjust the Qpopper behavior by setting this option. The -# values are: -# o 'default' Always send large chunks -# o 'always' Same as 'default' -# o 'never' Never aggregate data into large chunks -# o 'tls' Only aggregate data into large chunks when TLS/SSL -# has been negotiated for the session -# o 'ssl' Same as 'tls' -# -# Default: default -# -# set chunky-writes = default - - -# Specifies the log facility that Qpopper uses. -# -# Note that this does not apply to popauth, nor to the daemon in -# standalone mode. These continue to use the compile-time default. -# -# Values are: -# o 'mail' Qpopper logs to LOG_MAIL facility. -# o 'local0' Qpopper logs to LOG_LOCAL0 facility. -# o 'local1' Qpopper logs to LOG_LOCAL1 facility. -# o 'local2' Qpopper logs to LOG_LOCAL2 facility. -# o 'local3' Qpopper logs to LOG_LOCAL3 facility. -# o 'local4' Qpopper logs to LOG_LOCAL4 facility. -# o 'local5' Qpopper logs to LOG_LOCAL5 facility. -# o 'local6' Qpopper logs to LOG_LOCAL6 facility. -# o 'local7' Qpopper logs to LOG_LOCAL7 facility. -# -# Default: determined at compile time, usually LOG_LOCAL0 or -# LOG_MAIL, depending on the operating system. -# -# set log-facility = local1 - - -# When set, Qpopper logs successful authentications using the -# specified string. Within the string, an occurrence of '%0' is -# replaced with the Qpopper version, '%1' with the user name, '%2' -# with the user's host name, and '%3' with the user's IP address. -# -# Default: none, unless '--enable-log-login' used with ./configure, -# in which case "(v%0) POP login by user /"%1/" at (%2) %3" is used. -# -# set log-login = "(v%0) POP login by user /"%1/" at (%2) %3" - - |