net-wireless/wpa_supplicant: add 2.10-r5

Signed-off-by: orbea <orbea@riseup.net>

1 files changed, 480 insertions, 0 deletions

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
new file mode 100644
index 0000000..abd1668
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -0,0 +1,480 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+fi
+
+SLOT="0"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
+				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			fi
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
+				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+			fi
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (912315)
+	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
+	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli-r1.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+	if ! use wep; then
+		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
+		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
+		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
+		einfo "WEP-enabled networks will not even show up as available."
+		einfo "If your network is missing you may wish to USE=wep"
+	fi
+	if ! use tkip; then
+		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
+		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
+		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
+		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
+		ewarn "as available.  If your network is missing you may wish to USE=tkip"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}