Cdrom functions have been split out to dedicated cdrom.eclass. For the

time being, inherit cdrom; this can be removed once bug 398809 is fixed.

1 files changed, 2 insertions, 217 deletions

diff --git a/eclass/eutils.eclass b/eclass/eutils.eclass
index ef0f1ec37c1f..75fd8ad33493 100644
--- a/eclass/eutils.eclass
+++ b/eclass/eutils.eclass
@@ -1,6 +1,6 @@
 # Copyright 1999-2012 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/eclass/eutils.eclass,v 1.378 2012/01/31 06:36:19 ulm Exp $
+# $Header: /var/cvsroot/gentoo-x86/eclass/eutils.eclass,v 1.379 2012/01/31 06:44:00 ulm Exp $
 
 # @ECLASS: eutils.eclass
 # @MAINTAINER:
@@ -18,7 +18,7 @@
 if [[ ${___ECLASS_ONCE_EUTILS} != "recur -_+^+_- spank" ]] ; then
 ___ECLASS_ONCE_EUTILS="recur -_+^+_- spank"
 
-inherit multilib portability user
+inherit multilib cdrom user
 
 DESCRIPTION="Based on the ${ECLASS} eclass"
 
@@ -1155,221 +1155,6 @@ unpack_makeself() {
 	assert "failure unpacking (${filetype}) makeself ${shrtsrc} ('${ver}' +${skip})"
 }
 
-# @FUNCTION: cdrom_get_cds
-# @USAGE: <file on cd1> [file on cd2] [file on cd3] [...]
-# @DESCRIPTION:
-# Aquire cd(s) for those lovely cd-based emerges.  Yes, this violates
-# the whole 'non-interactive' policy, but damnit I want CD support !
-#
-# With these cdrom functions we handle all the user interaction and
-# standardize everything.  All you have to do is call cdrom_get_cds()
-# and when the function returns, you can assume that the cd has been
-# found at CDROM_ROOT.
-#
-# The function will attempt to locate a cd based upon a file that is on
-# the cd.  The more files you give this function, the more cds
-# the cdrom functions will handle.
-#
-# Normally the cdrom functions will refer to the cds as 'cd #1', 'cd #2',
-# etc...  If you want to give the cds better names, then just export
-# the appropriate CDROM_NAME variable before calling cdrom_get_cds().
-# Use CDROM_NAME for one cd, or CDROM_NAME_# for multiple cds.  You can
-# also use the CDROM_NAME_SET bash array.
-#
-# For those multi cd ebuilds, see the cdrom_load_next_cd() function.
-cdrom_get_cds() {
-	# first we figure out how many cds we're dealing with by
-	# the # of files they gave us
-	local cdcnt=0
-	local f=
-	for f in "$@" ; do
-		((++cdcnt))
-		export CDROM_CHECK_${cdcnt}="$f"
-	done
-	export CDROM_TOTAL_CDS=${cdcnt}
-	export CDROM_CURRENT_CD=1
-
-	# now we see if the user gave use CD_ROOT ...
-	# if they did, let's just believe them that it's correct
-	if [[ -n ${CD_ROOT}${CD_ROOT_1} ]] ; then
-		local var=
-		cdcnt=0
-		while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]] ; do
-			((++cdcnt))
-			var="CD_ROOT_${cdcnt}"
-			[[ -z ${!var} ]] && var="CD_ROOT"
-			if [[ -z ${!var} ]] ; then
-				eerror "You must either use just the CD_ROOT"
-				eerror "or specify ALL the CD_ROOT_X variables."
-				eerror "In this case, you will need ${CDROM_TOTAL_CDS} CD_ROOT_X variables."
-				die "could not locate CD_ROOT_${cdcnt}"
-			fi
-		done
-		export CDROM_ROOT=${CD_ROOT_1:-${CD_ROOT}}
-		einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}"
-		export CDROM_SET=-1
-		for f in ${CDROM_CHECK_1//:/ } ; do
-			((++CDROM_SET))
-			[[ -e ${CDROM_ROOT}/${f} ]] && break
-		done
-		export CDROM_MATCH=${f}
-		return
-	fi
-
-	# User didn't help us out so lets make sure they know they can
-	# simplify the whole process ...
-	if [[ ${CDROM_TOTAL_CDS} -eq 1 ]] ; then
-		einfo "This ebuild will need the ${CDROM_NAME:-cdrom for ${PN}}"
-		echo
-		einfo "If you do not have the CD, but have the data files"
-		einfo "mounted somewhere on your filesystem, just export"
-		einfo "the variable CD_ROOT so that it points to the"
-		einfo "directory containing the files."
-		echo
-		einfo "For example:"
-		einfo "export CD_ROOT=/mnt/cdrom"
-		echo
-	else
-		if [[ -n ${CDROM_NAME_SET} ]] ; then
-			# Translate the CDROM_NAME_SET array into CDROM_NAME_#
-			cdcnt=0
-			while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]] ; do
-				((++cdcnt))
-				export CDROM_NAME_${cdcnt}="${CDROM_NAME_SET[$((${cdcnt}-1))]}"
-			done
-		fi
-
-		einfo "This package will need access to ${CDROM_TOTAL_CDS} cds."
-		cdcnt=0
-		while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]] ; do
-			((++cdcnt))
-			var="CDROM_NAME_${cdcnt}"
-			[[ ! -z ${!var} ]] && einfo " CD ${cdcnt}: ${!var}"
-		done
-		echo
-		einfo "If you do not have the CDs, but have the data files"
-		einfo "mounted somewhere on your filesystem, just export"
-		einfo "the following variables so they point to the right place:"
-		einfon ""
-		cdcnt=0
-		while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]] ; do
-			((++cdcnt))
-			echo -n " CD_ROOT_${cdcnt}"
-		done
-		echo
-		einfo "Or, if you have all the files in the same place, or"
-		einfo "you only have one cdrom, you can export CD_ROOT"
-		einfo "and that place will be used as the same data source"
-		einfo "for all the CDs."
-		echo
-		einfo "For example:"
-		einfo "export CD_ROOT_1=/mnt/cdrom"
-		echo
-	fi
-
-	export CDROM_SET=""
-	export CDROM_CURRENT_CD=0
-	cdrom_load_next_cd
-}
-
-# @FUNCTION: cdrom_load_next_cd
-# @DESCRIPTION:
-# Some packages are so big they come on multiple CDs.  When you're done reading
-# files off a CD and want access to the next one, just call this function.
-# Again, all the messy details of user interaction are taken care of for you.
-# Once this returns, just read the variable CDROM_ROOT for the location of the
-# mounted CD.  Note that you can only go forward in the CD list, so make sure
-# you only call this function when you're done using the current CD.
-cdrom_load_next_cd() {
-	local var
-	((++CDROM_CURRENT_CD))
-
-	unset CDROM_ROOT
-	var=CD_ROOT_${CDROM_CURRENT_CD}
-	[[ -z ${!var} ]] && var="CD_ROOT"
-	if [[ -z ${!var} ]] ; then
-		var="CDROM_CHECK_${CDROM_CURRENT_CD}"
-		_cdrom_locate_file_on_cd ${!var}
-	else
-		export CDROM_ROOT=${!var}
-	fi
-
-	einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}"
-}
-
-# this is used internally by the cdrom_get_cds() and cdrom_load_next_cd()
-# functions.  this should *never* be called from an ebuild.
-# all it does is try to locate a give file on a cd ... if the cd isn't
-# found, then a message asking for the user to insert the cdrom will be
-# displayed and we'll hang out here until:
-# (1) the file is found on a mounted cdrom
-# (2) the user hits CTRL+C
-_cdrom_locate_file_on_cd() {
-	local mline=""
-	local showedmsg=0 showjolietmsg=0
-
-	while [[ -z ${CDROM_ROOT} ]] ; do
-		local i=0
-		local -a cdset=(${*//:/ })
-		if [[ -n ${CDROM_SET} ]] ; then
-			cdset=(${cdset[${CDROM_SET}]})
-		fi
-
-		while [[ -n ${cdset[${i}]} ]] ; do
-			local dir=$(dirname ${cdset[${i}]})
-			local file=$(basename ${cdset[${i}]})
-
-			local point= node= fs= foo=
-			while read point node fs foo ; do
-				[[ " cd9660 iso9660 udf " != *" ${fs} "* ]] && \
-					! [[ ${fs} == "subfs" && ",${opts}," == *",fs=cdfss,"* ]] \
-					&& continue
-				point=${point//\040/ }
-				[[ ! -d ${point}/${dir} ]] && continue
-				[[ -z $(find "${point}/${dir}" -maxdepth 1 -iname "${file}") ]] && continue
-				export CDROM_ROOT=${point}
-				export CDROM_SET=${i}
-				export CDROM_MATCH=${cdset[${i}]}
-				return
-			done <<< "$(get_mounts)"
-
-			((++i))
-		done
-
-		echo
-		if [[ ${showedmsg} -eq 0 ]] ; then
-			if [[ ${CDROM_TOTAL_CDS} -eq 1 ]] ; then
-				if [[ -z ${CDROM_NAME} ]] ; then
-					einfo "Please insert+mount the cdrom for ${PN} now !"
-				else
-					einfo "Please insert+mount the ${CDROM_NAME} cdrom now !"
-				fi
-			else
-				if [[ -z ${CDROM_NAME_1} ]] ; then
-					einfo "Please insert+mount cd #${CDROM_CURRENT_CD} for ${PN} now !"
-				else
-					local var="CDROM_NAME_${CDROM_CURRENT_CD}"
-					einfo "Please insert+mount the ${!var} cdrom now !"
-				fi
-			fi
-			showedmsg=1
-		fi
-		einfo "Press return to scan for the cd again"
-		einfo "or hit CTRL+C to abort the emerge."
-		echo
-		if [[ ${showjolietmsg} -eq 0 ]] ; then
-			showjolietmsg=1
-		else
-			ewarn "If you are having trouble with the detection"
-			ewarn "of your CD, it is possible that you do not have"
-			ewarn "Joliet support enabled in your kernel.  Please"
-			ewarn "check that CONFIG_JOLIET is enabled in your kernel."
-			ebeep 5
-		fi
-		read || die "something is screwed with your system"
-	done
-}
-
 # @FUNCTION: strip-linguas
 # @USAGE: [<allow LINGUAS>|<-i|-u> <directories of .po files>]
 # @DESCRIPTION: