diff options
Diffstat (limited to 'request/request.conf')
| -rw-r--r-- | request/request.conf | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/request/request.conf b/request/request.conf new file mode 100644 index 0000000..61dac25 --- /dev/null +++ b/request/request.conf @@ -0,0 +1,288 @@ +[folders] +# DISTFILES_DIR +# Define a dir to store distfiles +# Default: +# distfiles_dir=./distfiles +distfiles_dir=./distfiles + +# SEGMENTS_DIR +# Define a dir to store distfiles' segments +# Default: +# segments_dir=./tmp +segments_dir=./tmp + +[pkg_list] +# PKG_LIST_DIR +# Define a dir with pkg.list file +# Default: +# pkg_list_dir=./ +pkg_list_dir=./ + +# SYNOPSIS: del_pkg_list_when_dld_finished=0 | 1 +# - If del_pkg_list_when_dld_finished set to 1: +# Segget deletes pkg.list file, after all distfiles were successfuly fetched. +# Default: +# del_pkg_list_when_dld_finished=1 +del_pkg_list_when_dld_finished=1 + +[portage] +# SYNOPSIS: fetch_only=0 | 1 +# NOT IMPLEMENTED YET: fetch_only=0 + +[distfiles] +# MAX_CONNECTION_NUM_PER_DISTFILE +# Each distfile can have up to max_connection_num_per_distfile simultaneous +# connections. +# Minimum value: 1 +# Maximum value: 20 +# Default: +# max_connection_num_per_distfile=3 +max_connection_num_per_distfile=3 + +[segments] +# MAX_SEGMENT_SIZE +# Define maximum segment size in bytes. +# Minimum value: 10000 +# Maximum value: 10000000 +# Default: +# max_segment_size=500000 +max_segment_size=500000 + +# SYNOPSIS: resume_on=0 | 1 +# - If resume_on set to 1: +# Before starting downloading a segment segget checks whether this segment is +# already downloaded, checks segments size and if size mathces considers this +# segment to be downloaded and skips downloading process. +# - If resume_on set to 0: +# Segget always starts new fetch for a segment regardless of the fact whether it +# is downloaded or not. +# Default: +# resume_on=1 +resume_on=1 + +# MAX_TRIES +# If segment download was unsuccessful, new attempts are made. When attempts +# number reaches max_tries, segment gets FAILED status and error logged to error_log +# Minimum value: 1 +# Maximum value: -1 (for no limit) +# Default: +# max_tries=10 +max_tries=10 + +[connections] +# MAX_CONNECTIONS +# Define maximum number of connections +# Minimum value: 1 +# Maximum value: 20 +# Default: +# max_connections=10 +max_connections=10 + +# CURRENT_SPEED_TIME_INTERVAL_MSECS +# segget transfers may have bursty nature of their traffic. Therefore, while +# measuring current speed, segget actually calculates average speed during +# current_speed_time_interval_msecs time interval, defined in milliseconds. +# Minimum value: 100 +# Maximum value: 60000 +# Default: +# current_speed_time_interval_msecs=1000 +current_speed_time_interval_msecs=1000 + +# NOT IMPLEMENTED YET: max_total_speed=50000 + +[mirrors] +# MAX_CONNECTIONS_NUM_PER_MIRROR +# Define how many simultaneous downloads from one mirror segget is allowed to +# have. While choosing a mirror segget will skip mirrors with +# max_connections_num_per_mirror active downloads. +# Minimum value: 1 +# Maximum value: 10 +# Default: +# max_connections_num_per_mirror=1 +max_connections_num_per_mirror=1 + +# SYNOPSIS: collect_benchmark_stats_on=0 | 1 +# - If set to 1, stats on mirrors performance will be collected. +# default: +# collect_benchmark_stats_on=1 (Note: at the moment can NOT be changed) +collect_benchmark_stats_on=1 + +# SYNOPSIS: use_benchmark_stats=0 | 1 +# If use_benchmark_stats=1 statistics on mirrors is used to rate them +# and therefore improve performance. +# Each time connection from a particular mirror closes mirror->dld_time, +# and mirror->dld_size get increased (in case of unsuccessful connection +# only time gets increased), so avg speed for a mirror can be +# calculated: +# +# mirror->avg_speed=mirror->dld_size/mirror->dld_time. (1) +# +# When new segment is going to be started segget goes through the list of +# the mirrors distfile/segment has, and asks each mirror for self_rating: +# +# "ulong self_rating=mirror->mirror_on_the_wall();". +# +# This way segget chooses a mirror with the best self_rating. To calculate +# self_rating mirrors use the following formula: +# +# self_rating=dld_time/dld_size*honesty. (2) +# +# So mirrors actually say how bad they are. +# Even mirrors can have critical times, so to give mirrors another chance +# honesty was added to the formula (2). honesty can get values in +# interval (0,1]. Each time connection from a mirror opens or closes mirror +# sets its honesty=1. If mirror was asked for self_evaluation with +# mirror->mirror_on_the_wall(), but wasn't chosen its honesty decreases +# somewhat (see [mirror].benchmark_oblivion option), so next time it will +# lie little bit more about how bad it's. +# Default: +# use_benchmark_results=1 +# ***Note: at the moment use_benchmark_results can NOT be set to 0 +use_benchmark_stats=1 + +# BENCHMARK_OBLIVION +# benchmark_oblivion option allows to adjust how fast segget "forgets" +# benchmarking statistics on mirrors performance. +# Each time mirror->mirror_on_the_wall() called, mirror decreases its +# honesty (to have more chances next time) using the following formula: +# +# honesty=honesty*100/(100+settings.benchmark_oblivion) (3) +# +# Therefore, setting benchmark_oblivion=100 will make mirror look twice +# less bad next time mirror->mirror_on_the_wall() called. +# Minimum value: 0 (Beware: setting to 0, will can exclude unlucky mirrors) +# Maximum value: 1000 +# Default: +# benchmark_oblivion=5 +benchmark_oblivion=5 + +[provide_mirror_to_others] +# PROVIDE_MIRROR_DIR +# Define a dir for making symlinks to downloaded distfiles. This dir can be +# used to provide local mirror for other hosts (with help of Apache, vsftp, etc). +# If set to none, segget will not make symlinks. +# Default: +# provide_mirror_dir=none +provide_mirror_dir=./provide_mirror_dir + +# SYNOPSIS: PROVIDE_MIRROR_FILES_RESTRICT_LIST_ON= 0 | 1 +# If PROVIDE_MIRROR_DIR=none this option will be ignored. +# - If set to 1, segget will compare distfile name with the list of forbiden +# patterns from the restricted.conf file. If distfile name contains any of the +# patterns, no symlink will be provided to this distfile. +# Default: +# provide_mirror_files_restrict_list_on=0 +provide_mirror_files_restrict_list_on=0 + +[provide_proxy_fetcher_to_others] +# PROVIDE_PROXY_FETCHER_IP +# Define an ip address segget will use to provide access for tuiclients. +# The parameter should be a string holding your host dotted IP address. +# Default: +# provide_proxy_fetcher_ip=none +provide_proxy_fetcher_ip=127.0.0.1 + +# PROVIDE_PROXY_FETCHER_PORT +# Define a port segget will use to provide access for tuiclients. +# The parameter should be an integer. +# Minimum value: 1 +# Maximum value: 65535 +# Default: +# provide_proxy_fetcher_port=3131 +provide_proxy_fetcher_port=3130 + +[networks] +# NETWORK0_PRIORITY +# Define priority as a value in range from lowest 0 to highest 10. +# Segget tries to use networks with higher priority levels first, and in case of +# failure will switch to networks with lower priority levels. +# Segget will NOT use network if its priority level set to 0. Therefore at least +# one network must have priority level higher than 0. +# Networks with local mirrors usually would have higher priority than that of +# networks with remote mirrors. +# Segget can have up to 10 networks (from network0 to network9). +# Settings for each network should be defined in network#.conf file, where +# instead of # should be network number. For network0 it's network0.conf +# Default: +# network0_priority=10 +# network1_priority=0 +# network2_priority=0 +# network3_priority=0 +# network4_priority=0 +# network5_priority=0 +# network6_priority=0 +# network7_priority=0 +# network8_priority=0 +# network9_priority=0 +network0_priority=0 +network1_priority=0 +network2_priority=0 +network3_priority=0 +network4_priority=7 +network5_priority=0 +network6_priority=0 +network7_priority=0 +network8_priority=0 +network9_priority=0 + +[schedule] + +[user-data] +# USER_AGENT +# Set the User-Agent: header in the http request sent to the remote server. +# This can be used to fool servers or scripts. +# Default: +# user_agent=segget +user_agent=segget + +# Specify the user and password for authentication on a ftp servers. +# NOT IMPLEMENTED YET: ftp-user=anonymous +# NOT IMPLEMENTED YET: ftp-password=me@mail.ru + +[ui_server] +# tuiclient monitors segget's activity by establishing tcp connection +# with segget daemon (ui_server part of it). + +# UI_IP +# Define an ip address segget will use to provide access for tuiclients. +# The parameter should be a string holding your host dotted IP address. +# Default: +# ui_ip=127.0.0.1 +ui_ip=127.0.0.1 + +# UI_PORT +# Define a port segget will use to provide access for tuiclients. +# The parameter should be an integer. +# Minimum value: 1 +# Maximum value: 65535 +# Default: +# ui_port=9999 +ui_port=9999 + +[logs] +# LOGS_DIR +# Define a dir to store log files. +# Default: +# logs_dir=./logs +logs_dir=/home/mona/idfetcha/logs + +# GENERAL_LOG_FILE +# Define a file name to store general log. +# Set to none to disable loggin. +# Default: +# general_log_file=segget.log +general_log_file=segget.log + +# ERROR_LOG_FILE +# Define a file name to store error log. +# Set to none to disable loggin. +# Default: +# error_log_file=segget.log +error_log_file=error.log + +# DEBUG_LOG_FILE +# Define a file name to store debug log. +# Set to none to disable loggin. +# Default: +# debug_log_file=segget.log +debug_log_file=debug.log
\ No newline at end of file |