path: root/genkernel.conf

# Configuration file for genkernel
# $Id$

# This file is sourced by genkernel at startup and determines which options
# we will be using to compile our kernel.  The order of precidence is simple,
# with the internal settings being least important, configuration file
# settings next, and command line options being most important.

# =========Common Command Line Option Defaults=========

# Run 'make oldconfig' before compiling this kernel?
OLDCONFIG="yes"

# Run 'make menuconfig' before compiling this kernel?
MENUCONFIG="no"

# Run 'make clean' before compilation?
# If set to NO, implies MRPROPER WILL NOT be run
# Also, if clean is NO, it won't copy over any configuration
# file, it will use what's there.
CLEAN="yes"

# Run 'make mrproper' before configuration/compilation?
MRPROPER="yes"

# Override the arch detection?
# ARCH_OVERRIDE="x86"

# Mount BOOTDIR automatically if it isn't mounted?
MOUNTBOOT="yes"

# Make symlinks in BOOTDIR automatically?
# SYMLINK="no"

# Save the new configuration in /etc/kernels upon
# successfull compilation
SAVE_CONFIG="yes"

# Use Color output in Genkernel?
USECOLOR="yes"

# Clear build cache dir
# CLEAR_CACHE_DIR="yes"

# Genkernel uses an independent configuration for MAKEOPTS, and does not source
# /etc/make.conf . You can override the default setting by uncommenting and
# tweaking the following line. Default setting is set up by
# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
# argument is: <number of processors>*<number of cores per processor>+1
# MAKEOPTS="-j2"

# Add in LVM support from static binaries if they exist on the system, or
# compile static LVM binaries if static ones do not exist.
# LVM="no"

# Add in Luks support. Needs sys-fs/cryptsetup with -dynamic installed.
# LUKS="no"

# Add in GnuPG support
# GPG="no"

# Add in EVMS support from static binaries if they exist on the system: you
# should run "emerge evms" first.
# EVMS="no"

# Add DMRAID support.
# DMRAID="no"

# Include (or suppresses the inclusion of) busybox in the initrd or initramfs.
# If included, busybox is rebuilt if the cached copy is out of date.
# BUSYBOX="yes"

# Includes mdadm/mdmon binaries in initramfs.
# Without sys-fs/mdadm[static] installed, this will build a static mdadm.
# MDADM="no"
# Specify a custom mdadm.conf.
# If not set the ramdisk will be built without a mdadm.conf and will auto-detect
# arrays during bootup.
# This should generally not be needed.
# MDADM_CONFIG=""

# Add Multipath support.
# MULTIPATH="no"

# Add iSCSI support.
# ISCSI="no"

# Enable copying of firmware into initramfs
# FIRMWARE="no"
# Specify directory to pull from
# FIRMWARE_DIR="/lib/firmware"
# Specify specific firmware files to include. This overrides FIRMWARE_DIR
# FIRMWARE_FILES=""

# Enable disklabel support (copies blkid to initrd)
DISKLABEL="yes"

# Add new kernel to grub?
# BOOTLOADER="grub"

# Enable splashutils in early space (initrd). Default is "no".
# SPLASH="yes"

# Use this splash theme. If commented out - the "default" name theme is used.
# Also, SPLASH="yes" needs to be enabled for this one to one work.
# This supersedes the "SPLASH_THEME" option of /etc/conf.d/splash (in early space).
# SPLASH_THEME="gentoo"

# =========Low Level Compile Settings=========
#
# GNU Make to use for kernel.  See also the --kernel-make command line option.
# KERNEL_MAKE="make"

# Compiler to use for the kernel (e.g. distcc).  See also the --kernel-cc
# command line option.
# KERNEL_CC="gcc"

# Assembler to use for the kernel.  See also the --kernel-as command line
# option.
# KERNEL_AS="as"

# Linker to use for the kernel.  See also the --kernel-ld command line option.
# KERNEL_LD="ld"

# GNU Make to use for the utilities.  See also the --utils-make command line
# option.
# UTILS_MAKE="make"

# Compiler to use for the utilities (e.g. distcc).  See also the --utils-cc
# command line option.
# UTILS_CC="gcc"

# Assembler to use for the utilities.  See also the --utils-as command line
# option.
# UTILS_AS="as"

# Linker to use for the utilities.  See also the --utils-ld command line
# option.
# UTILS_LD="ld"

# =========GENKERNEL LOCATION CONFIGURATION============
# Variables:
#   %%ARCH%%  - Final determined architecture
#   %%CACHE%% - Final determined cache location

# Set genkernel's temporary work directory.  Default is /var/tmp/genkernel
# TMPDIR="/var/tmp/genkernel"

# Set the boot directory, default is /boot
#BOOTDIR="/boot"

# Default share directory location
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"

# Location of the default cache
CACHE_DIR="/var/cache/genkernel"
# Location of DISTDIR, where our source tarballs are stored
DISTDIR="${CACHE_DIR}/src"
# Log output file
LOGFILE="/var/log/genkernel.log"
# Debug Level
LOGLEVEL=1

# Default location of kernel source
DEFAULT_KERNEL_SOURCE="/usr/src/linux"
# Default kernel config (only use to override using
# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
# DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"

BUSYBOX_VER="VERSION_BUSYBOX"
BUSYBOX_SRCTAR="${DISTDIR}/busybox-${BUSYBOX_VER}.tar.bz2"
BUSYBOX_DIR="busybox-${BUSYBOX_VER}"
BUSYBOX_BINCACHE="%%CACHE%%/busybox-${BUSYBOX_VER}-%%ARCH%%.tar.bz2"
# BUSYBOX_APPLETS="[ ash sh mount uname echo cut cat"

DEVICE_MAPPER_VER="VERSION_DMAP"
DEVICE_MAPPER_DIR="device-mapper.${DEVICE_MAPPER_VER}"
DEVICE_MAPPER_SRCTAR="${DISTDIR}/device-mapper.${DEVICE_MAPPER_VER}.tgz"
DEVICE_MAPPER_BINCACHE="%%CACHE%%/device-mapper-${DEVICE_MAPPER_VER}-%%ARCH%%.tar.bz2"

LVM_VER="VERSION_LVM"
LVM_DIR="LVM2.${LVM_VER}"
LVM_SRCTAR="${DISTDIR}/LVM2.${LVM_VER}.tgz"
LVM_BINCACHE="%%CACHE%%/LVM2.${LVM_VER}-%%ARCH%%.tar.bz2"

MDADM_VER="VERSION_MDADM"
MDADM_DIR="mdadm-${MDADM_VER}"
MDADM_SRCTAR="${DISTDIR}/mdadm-${MDADM_VER}.tar.bz2"
MDADM_BINCACHE="%%CACHE%%/mdadm-${MDADM_VER}-%%ARCH%%.tar.bz2"

DMRAID_VER="VERSION_DMRAID"
DMRAID_DIR="dmraid/${DMRAID_VER}"
DMRAID_SRCTAR="${DISTDIR}/dmraid-${DMRAID_VER}.tar.bz2"
DMRAID_BINCACHE="%%CACHE%%/dmraid-${DMRAID_VER}-%%ARCH%%.tar.bz2"

ISCSI_VER="VERSION_ISCSI"
ISCSI_DIR="open-iscsi-${ISCSI_VER}"
ISCSI_SRCTAR="${DISTDIR}/open-iscsi-${ISCSI_VER}.tar.gz"
ISCSI_BINCACHE="%%CACHE%%/iscsi-${ISCSI_VER}-%%ARCH%%.bz2"

E2FSPROGS_VER="VERSION_E2FSPROGS"
E2FSPROGS_DIR="e2fsprogs-${E2FSPROGS_VER}"
E2FSPROGS_SRCTAR="${DISTDIR}/e2fsprogs-${E2FSPROGS_VER}.tar.gz"
BLKID_BINCACHE="%%CACHE%%/blkid-${E2FSPROGS_VER}-%%ARCH%%.bz2"

FUSE_VER="VERSION_FUSE"
FUSE_DIR="fuse-${FUSE_VER}"
FUSE_SRCTAR="${DISTDIR}/fuse-${FUSE_VER}.tar.gz"
FUSE_BINCACHE="%%CACHE%%/fuse-${FUSE_VER}-%%ARCH%%.tar.bz2"

UNIONFS_FUSE_VER="VERSION_UNIONFS_FUSE"
UNIONFS_FUSE_DIR="unionfs-fuse-${UNIONFS_FUSE_VER}"
UNIONFS_FUSE_SRCTAR="${DISTDIR}/unionfs-fuse-${UNIONFS_FUSE_VER}.tar.bz2"
UNIONFS_FUSE_BINCACHE="%%CACHE%%/unionfs-fuse-${UNIONFS_FUSE_VER}-%%ARCH%%.bz2"

GPG_VER="VERSION_GPG"
GPG_DIR="gnupg-${GPG_VER}"
GPG_SRCTAR="${DISTDIR}/gnupg-${GPG_VER}.tar.bz2"
GPG_BINCACHE="%%CACHE%%/gnupg-${GPG_VER}-%%ARCH%%.bz2"