Updated gitignore

49 files changed, 9298 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..d7c0e65
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,15 @@
+trash
+s.sh
+dist.d
+list
+sources.conf
+gitcrt
+sources.sh
+bootstrap_workdir.conf
+bootstrap_workdir.sh
+update.sh
+sync_mecha
+create_dracut.sh
+inprogress
+flashit.sh
+makeit_go.sh
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..c3251ab
--- /dev/null
+++ b/README.md
@@ -0,0 +1,238 @@
+## Abstract
+
+A stateless environment based on Gentoo, which aims on making the 
+maintenance of multiple machines easier, improve stability and usability 
+on environments like Research or University computer labs.
+
+
+## An introduction to the stateless concept
+
+To begin with, a stateless system, as a concept, is an operating system which can boot and operate without requiring to hold a “memory” of its last state. However, even as a concept, this raises many questions, and could make sceptical even someone which has spend a little time reading about the operation of Linux. That is because, such a system would have many operational restrictions. First of all, the system would be “frozen in time”, meaning that every time the system boots, is like booting for the first time, because no inner “advancement” is happening, that is, no previous timeline of changes and configurations exists.
+
+How could such a system be used and what would be its aims to begin with? Why create something that does not advance while being used? Before answering those, I must note that the stateless concept is not new nor undeveloped, on the contrary, is something that exists and is very active, with many remarkable and active projects from well known organizations. 
+
+The answer to the above is found on environments where the system’s integrity and continuous operation of it, is mandatory. A stateless system, while having many operational restrictions for a normal day to day use, can provide many perks for the above environments, because if you make something that works, and it does no have “memory” of the past, then, on each reboot the system keeps no changes that in the past could have led it being unstable or even completely broken.
+
+There are many ways to make such a system, each of it having its own pros and cons. For example, booting your system on a ramdisk instantly provides you with all those good perks, because each reboot, resets everything. However that has a cost, that is, machines with limited amount of memory, e.g. embedded systems, can not use it.
+ 
+An other famous options derives from the well known read-only root filesystem. That system has no need of a reset, because none needs to be made. Read-only means no writes leading to no changes, which in turn implies that it should not break, unless hardware failure is considered. 
+Embedded systems can easily take advantage of this, knowing that the functions and features need to be supported, are limited by system’s definition. That system is created for a specific purpose and I believe that they adapt quite good at it.
+
+On the other hand however, this would not be favoured by bigger systems, because those must use quite more functions and provide many more features, meaning that editing and patching everything that needs write permissions(if possible) can be time consuming and quite annoying if you imagine that those changes must be made each time the system updates (from the server).
+
+The aim of this project is to create something that can be used by as many different systems as possible. For achieving this, a mixed version of the above methods will be considered. The root filesystem will be read-only while certain directories like /etc will be mounted as ramdisk, while some others as tempfs, e.g. /var. Ramdisk /var can be considered too, supposing that some of it’s inner directories will be kept clean, to keep it’s size at a minimum.
+
+Apart from the system, this project will create additional services. Those for now are: A builder and a controller. The builder will lie on a central powerful machine, which will build the above system and prepare it for distribution.
+
+The controller will be a initramfs image which will provide functions for creating new drive’s interfaces, creating filesystems, syncing the system which lies on the server to the local drives, determining how a system is considered healthy, which is the system’s backup partition and how the bootflag will change between those. More details, additional functions and configuration options will be discussed on the technical part later for both the controller and the builder.
+
+
+#### Obstacles
+
+Because the aims is to create a system which will support as many machines as possible, a kernel with build-in drives will grow in size quite fast, which is not desirable. To pass over this, an initramfs must be created or edited which will support a modular kernel while at the same time will host all the functions from which the controller is consisted.
+
+Make config.d fetched files persistent
+
+#### Expectations
+
+A builder inside the server which will build a portable initramfs image, configured by the users needs from the config.d directory. The init-image could then be ported to a usb-drive, cd or any bootable medium and initiate the process. When done, the machine will be bootable and ready to use for the purpose it was created.
+
+A future thought would be creating a service inside the machine which will be distributing the images. That services could support NFS mount for the purpose of installing the above initramfs image and kernel locally. Initially a boot from network would happen, then a message “no system image is found locally” would appear on the client’s screen. The user would be able to either choose to run the system as a diskless node, or to install the image locally. This would create a boot partition with everything needed to initiate the normal process.
+ 
+
+#### Abstract Framework
+
+- Read Only
+     - /usr
+     - /etc 1*
+     - /bin
+     - /lib
+     - /opt
+     - /var 2*
+
+- Read – Write
+     - /boot/
+     - /boot/logs
+     - /user-data/ 3*
+<<<<<<< HEAD
+  - /user-data/persistent
+    - {local,rmount}
+        - /local/{root,home,mnt,media}
+      - {var,etc} 4*
+- tmpfs
+     - /user-data/tmpfs
+      - {tmp,var,etc}
+=======
+	- /user-data/persistent
+		- {local,rmount}
+	  		- /local/{root,home,mnt,media}
+	  	- {var,etc} 4*
+- tmpfs
+     - /user-data/tmpfs
+     	- {tmp,var,etc}
+>>>>>>> 47c93c45f8850c954111560b0da6f77dc251043b
+     - /tmp
+     - /var/tmp
+
+
+
+
+
+#### Technical details
+
+After the kernel has load the initramfs, a check script will be sourced. The script, initially will read the configuration files from the /config.d directory (a directory which will be updated from the server) and then scan the indicated filesystems for the one holding the boot flag. 
+The boot flag will be a file which the initramfs configures each time a filesystem completes a healthy cycle (successful start up and shutdown), and will lie inside the root filesystem. 
+Such a file can only be modified by the initramfs, and missing or modifying it manually will indicate a system corruption, immediately activating the boot flag switch over the backup system.
+
+About the boot flag switch, I am thinking about supporting two methods. Under the /config.d directory, a file will either instruct the initramfs to instantly bailout and boot the backup filesystem or to use that backup partition for cloning it over the corrupted system. By this options, systems that must operate as soon as possible, will boot fast, while systems that can spare some time, will fix the damaged system without leading to a boot flag switch.
+
+That file and many others would be configured by the administrator on the server which hosts the builder. The initramfs will always attempt to sync the config.d directory from the server, with its local one.
+
+After determining which filesystem will be booted, a second source ver-control script will be initiated, which in turn will ask from the server about the latest version and compare it with the local. If the versions match then the process of mounting the rootfs will be initiated, if they are not, the updater will notify the user that the system needs to be updated, and ask for approval. This option could be switched of entirely if wished, to avoid the system hanging for approval on systems where human presence will be quite rare or even none existent.
+
+
+#### The Controller
+
+The controller will: 
+```
+-Create a custom initramfs 
+-Create functions for the initramfs to: 
+-Select the appropriate drives 
+-Identify the current filysystem(if any) 
+-Modify (create,delete) filesystems 
+-Manage, modify and mount subvolumes (btrfs for now) 
+-Identify network interface and initiate networking (wired) 
+-Communicate with the server (e.g asking for latest version) 
+-Sync the local root file system, with the server 
+-Mount tmpfs, bind mounts and overlays 
+-Create a local backup filesystem (now I am thinking to about using 
+rsync, if btrfs is not an option) 
+-Edit and create configs to make the filesystem functional on the local host 
+-Determinate what is considered a healthy start up and shut down 
+-Change boot partitions in case the health check fails or if system 
+corruption occurred. 
+-A self(initramfs) health-check. 
+-Copy, compress and archive system logs (maybe on a subfolder inside 
+the boot volume, which I find it dangerous for now) 
+-Add the libraries and dependencies to the initramfs to support the tools to be used. 
+-Integrate some general modules that could be used. 
+eg: modules for the boot filesystem, if system logs are saved there 
+```
+
+#### System 
+```
+Create a minimal system (by bootsptrap??? script on /usr/portage/scripts) 
+Configure the system to be functional and bootable 
+Configure the system to function as readonly by 
+-configure /var and /etc 
+-tmpfs filesystems for some directories 
+-using overlays 
+-using aufs? 
+Clean as many leftovers and unused files from the above steps
+```
+#### The system’s tree
+```
+/boot /dev /proc /sys /etc /usr {,s}bin /usr /lib{,32,64} /var /mnt /media /run /opt /home /root user-data/ /user-data/mnt /user-data/tmpfs-{etc,var,tmp}
+/…/local/{data,home,root} /user-data/persistent/{etc,var,logs,config.d}
+```
+Symlinks
+```
+/etc      --> /user-data/tmpfs/etc
+/var      --> /.../.../var
+/tmp      --> /.../.../tmp
+/root     --> /.../persistent/local/root
+/home     --> /.../.../local/home
+```
+The entries following in the fstab below should not be considered. However they appear there for the case of going symlink-free. Exception makes /etc, which will always be mounted from the initramfs first, as a ramdisk and hence does not appear in the fstab.
+
+Special files and directories could be copied over the persistent directory if they are considered important.
+
+Read-Only early fstab framework
+```
+<fs>          <mountpoint>   <type>       <opts>                 <dump/pass>
+/dev/sdaA         /boot        ext2/vfat     defaults                0       2
+/dev/sdaX         /            ext4/btrfs    noatime,ro/subvol       0       1/0
+/dev/sdaH         /user-data   ext4/btrfs    defaults/subvol         0       1/0
+/dev/sdaH         /var/tmp     tmpfs         noexec,no...            0       0
+/dev/sdaH         /var/logs*   tmpfs         noexec,no...            0       0
+/dev/sdaH         /usr/tmp     tmpfs         noexec,no...            0       0
+tmpfs             /tmp         tmpfs         noexec,no...            0       0
+/dev/sdaH         /{home.root} ext4/btrfs    defaults/subvol         0       1/0
+```
+** log: User's choice
+
+
+
+
+
+
+### About the builder
+
+The builder will: 
+```
+Build the above system 
+Build the above initramfs
+Chroot and optimize the above system for the target architecture 
+Prepare the above setup for distribution by either: 
+-making a stage 4 tarball 
+-making a snapshot 
+-method not aware of yet 
+A script which will: 
+Integrate the above builder steps 
+Check the builder directory for missing files which will sync missing files or all the directory from a remote web location. 
+```
+
+### The config.d directory
+
+As mentioned earlier, this directory will hold configurations files. From those files the builder and initramfs will be able to execute special instructions instead of the preconfigured. For example, the builder will first search there for a make.conf file, and if it exists, then that will be the file to be used for the system optimization. The configurations files which the controller will ask from the server, will be hosted there.
+
+An first view of the config.d is presented below, but keep in mind that those files could change and more could be added.
+``` 
+config.d
+├── controller 
+│   ├── btrfs.conf 
+│   ├── cfstab.conf 
+│   ├── drives.conf 
+│   ├── examples 
+│   ├── README 
+│   ├── server 
+│   │   └── server.info.conf 
+│   ├── services 
+│   │   └── default-runlevel 
+│   ├── tmpfs.conf 
+│   └── update.chk.conf 
+├── README 
+├── sources 
+│   ├── README 
+│   └── sources.conf 
+└── system 
+   ├── boot.conf 
+   ├── etc.conf 
+   ├── examples 
+   ├── fstab.conf 
+   ├── network.conf 
+   ├── overlays.conf 
+   └── README
+```
+
+Intuition should do a great job here, just by reading the name of each file, however there are some entries worth mentioning which could further reveal what could the controller achieve when used with config.d.
+
+Under the controller sub-directory the server.info.conf file, will provide all the informations needed to further optimize the relations between initramfs and the server. Indications about the server and the tools to be used for the authentication will lie there. From that someone could make the builder under a machine A and indicate that all configurations files from now on, should be fetched from an alternative machine B. This method provides a tool for switching servers very fast.
+
+Just change the configuration file, and all hosts will be redirected from A to B. Every single one of them will be forced to only talk to and listen from the indicated server.
+
+Imagine now instead of the file listing one server, to list S(x) serves. Those servers could be sharing the conf.d directory or each one having his own. The first N(1) hosts would come online and ask for the configuration files from the server S(1) and when done, would start coping a new version from the server or maybe just boot and start sending important calculated/measured data. If more hosts now come online and attempt to send/receive a big amount of data, the ping in between them and the S(1) server would not pass a test, leading them to chose S(2). And this could go on for as many N(n) hosts talking with S(x) servers, where obviously x << n.
+
+An obstacle deriving from this would be to find a way and notify the hosts already running to switch to the server with the lowest load, without them restarting, when a server has lost a number of hosts.
+
+System directory has straight forward names with only one entry worth mentioning and that is fstab.conf. We can see that fstab appears 2 times in the list. One under the controller sub-directory with cfstab.conf and one without the “c”. Files that start with a “c” will always appear under the controller sub-directory, and aim to provide a way of configuring the system after it has been built. Say, that someone would want to change some fstab entries to all the hosts running the stateless system. Could either start remounting as rw all hosts one by one, make the changes and then remount them back to ro, choose to use a special package to do all the mounts and unmounts automatically by typing the commands once. Or could change the fstab inside the config.d directory and restart the hosts.
+
+Again there is an obstacle deriving for this. All hosts must restart for the changes to take effect, if the last method is the case.
+
+Note: Always cfoo.config is considered of highest priority than foo.config.
+
+
+### License
+
+Everything which will be created from this project, will be licensed 
+under GPL-2
diff --git a/TODO b/TODO
new file mode 100644
index 0000000..4c1c877
--- /dev/null
+++ b/TODO
@@ -0,0 +1,43 @@
+# TODO
+
+System Builder list
+	Catalyst
+		Include script to manage catalyst stage1,2,3 builds
+		Include script to create a portage custom stateless profile
+		Include script to generate the stage1,2,3 spec files
+		Include x86, amd64, arm,armx64 stage builds {For the project amd64 will be supported}
+		Include the generated stage3 tarball to the rest of the process as it is.
+
+	Create Server menu entry
+		Create submenu entry for editing trusted hosts
+		Create submenu entry to create a new user & group given by the user
+		Add the dist.d and config.d directory to that group
+		Generate ssh keys for server-client dist
+		Add ssh pub.trusted.hosts to that user
+		Create bind-mount or symlink of the above directories to the above user dir
+		Include those keys to config.d/controller directory
+		Include gpg
+
+	Include kernel commandline editor
+	Include ro autoconf
+		Should:
+			Create the /proc/mounts symlinks # If /etc is not selected by the user to be mounted as tmpfs from the controller
+	Include sys cleaner
+	Include version creator
+	Include snapshot creator
+	Include stage4 tarball create option
+
+End of System Builder list
+
+Controller list {Initramfs}
+	
+	Include early netowrking script hooks
+	Include option to fetch confs from server
+	Include option to define newroot based on the above configurations
+	Include HDD interface creator
+	Include version checker
+	Include rootfs label checker
+	Include backupfs label checker
+	Include configuration service for the rootfs
+
+End of Controller list
diff --git a/bin/gse b/bin/gse
new file mode 100755
index 0000000..119c5f3
--- /dev/null
+++ b/bin/gse
@@ -0,0 +1,593 @@
+#!/bin/bash
+
+##																						     ##
+#																						      #
+# Gentoo Stateless Environment project													      #
+#																						      #
+# Everything inside this directory has been created during Gentoo-soc 2017 and is distributed #
+# under General Public License version 2.												      #
+#																						      #
+##																						     ##
+
+LC_COLLATE=C
+
+
+# DEFINITION OF WORKDIR AND IT'S SUBDIRECTORIES
+export WORKDIR="$(dirname ${PWD})"
+export CONFDIR="${WORKDIR}/config.d"
+export DISTDIR="${WORKDIR}/dist.d"
+export LOCALLG="${WORKDIR}/local"
+
+# PATH DEFINITION FOR THE SCRIPTS WHICH WILL AID THE PROCESS
+export PATH=${PATH}:${WORKDIR}/scripts/functions
+
+STAT_VAR=''
+
+set -o
+
+# MENU OPTIONS MESSAGES
+men_opt (){
+	case $1 in
+		1 )
+			echo -e "######################  \e[94m~~Main Menu~~\e[39m   #####################"
+			echo "##							   ##"
+			echo -e "## [ \e[32mI\e[39m  ]	System menu		   	           ##"
+			echo -e "## [ \e[32mII\e[39m ]	Build the controller image		   ##"
+			echo -e "## [ \e[32mIII\e[39m]	Documentations				   ##"
+			echo -e "## [ \e[32mIV\e[39m ]	About the project			   ##"
+			echo -e "## [ \e[32mV\e[39m  ]	I shouldn't be here, please let me leave!  ##"
+			echo "##							   ##"
+			echo -e "## [ \e[32mT\e[39m  ]				  Terminal	   ##"
+			echo "##							   ##"
+			echo "#############################################################"
+			;;
+		2 )
+			echo -e "###################  \e[94m~~Documentations~~\e[39m   ####################"
+			echo "##							    ##"
+			echo -e "## [ \e[32mI\e[39m   ]	Introduction to GSE Directory		    ##"
+			echo -e "## [ \e[32mII\e[39m  ]	The Controller 				    ##"
+			echo -e "## [ \e[32mIII\e[39m ]	The Config.d Directory		 	    ##"
+			echo -e "## [ \e[32mIV\e[39m  ]	The dist.d Directory			    ##"
+			echo -e "## [ \e[32mV\e[39m   ]	Main Menu 				    ##"
+			echo "##							    ##"
+			echo "##############################################################"
+			;;
+		3 )
+			echo -e "########################  \e[94m~~About~~\e[39m   ########################"
+			echo "##							   ##"
+			echo -e "## [ \e[32mI\e[39m  ]	About the project			   ##"
+			echo -e "## [ \e[32mII\e[39m ]	Linux, Gentoo and the birth of an Idea	   ##"
+			echo -e "## [ \e[32mIII\e[39m]	Open Source To The End and Beyond	   ##"
+			echo -e "## [ \e[32mIV\e[39m ]	Main Menu 				   ##"
+			echo "##							   ##"
+			echo "#############################################################"
+			;;
+		5)
+			echo -e "######################  \e[94m~~Builder~~\e[39m   #####################"
+			echo "##						         ##"
+			echo -e "## [ \e[32mI\e[39m  ]	Built a System 		                 ##"
+			echo -e "## [ \e[32mII\e[39m ]	Configure built variables		 ##"
+			echo -e "## [ \e[32mIII\e[39m]	Select default system for distribution	 ##"
+			echo -e "## [ \e[32mIV\e[39m ]	Create a stage4 tarball			 ##"
+			echo -e "## [ \e[32mV\e[39m  ]	Return back  				 ##"
+			echo "##							 ##"
+			echo -e "## [ \e[32mT\e[39m  ]				Terminal	 ##"
+			echo "##							 ##"
+			echo "###########################################################"
+			;;
+		6)
+			echo -e "#################  \e[94m~~System Menu~~\e[39m   ################"
+			echo "##						   ##"
+			echo -e "## [ \e[32mI\e[39m  ]	Portage		  	           ##"
+			echo -e "## [ \e[32mII\e[39m ]	Catalyst			   ##"
+			echo -e "## [ \e[32mIII\e[39m]	Initiate Build			   ##"
+			echo -e "## [ \e[32mIV\e[39m ]	Return back  			   ##"
+			echo "##						   ##"
+			echo -e "## [ \e[32mT\e[39m  ]		  		Terminal   ##"
+			echo "##						   ##"
+			echo "#####################################################"
+			;;
+		7)
+			echo -e "######################  \e[94m~~Portage~~\e[39m   #####################"
+			echo "##						         ##"
+			echo -e "## [ \e[32mI\e[39m  ]	Guided/Automatic make.conf	 	 ##"
+			echo -e "## [ \e[32mII\e[39m ]	Manually edit make.conf (Reset)  	 ##"
+			echo -e "## [ \e[32mIII\e[39m]	Review make.conf	                 ##"
+			echo -e "## [ \e[32mIV\e[39m ]	Edit packages.use			 ##"
+			echo -e "## [ \e[32mV\e[39m  ]	Review packages.use	 		 ##"
+			echo -e "## [ \e[32mVI\e[39m ]	Restore packages.use	 		 ##"
+			echo -e "## [ \e[32mVII\e[39m]	Return back  				 ##"
+			echo "##							 ##"
+			echo -e "## [ \e[32mT\e[39m  ]				Terminal	 ##"
+			echo "##							 ##"
+			echo "###########################################################"
+			;;
+		8)
+			echo -e "##################  \e[94m~~Configurations~~\e[39m   ##################"
+			echo "##						         ##"
+			echo -e "## [ \e[32mI\e[39m    ]	Configure fstab/drives	      	         ##"
+			echo -e "## [ \e[32mII\e[39m   ]	Manually edit fstab	 		 ##"
+			echo -e "## [ \e[32mIII\e[39m  ]	Manually edit drive names		 ##"
+			echo -e "## [ \e[32mIV\e[39m   ]	Edit Hostname				 ##"
+			echo -e "## [ \e[32mV\e[39m    ]	Edit /etc/conf.d/net			 ##"
+			echo -e "## [ \e[32mVI\e[39m   ]	Edit Locales				 ##"
+			echo -e "## [ \e[32mVII\e[39m  ]	Edit Consolefont			 ##"
+			echo -e "## [ \e[32mVIII\e[39m ]	Edit sshd		 	 	 ##"
+			echo -e "## [ \e[32mIX\e[39m   ]	Edit sshkey		 	 	 ##"
+			echo -e "## [ \e[32mX\e[39m    ]	Symlink, bind, overlay and tmpfs	 ##"
+			echo -e "## [ \e[32mXI\e[39m   ]	Add Scripts				 ##"
+			echo -e "## [ \e[32mXII\e[39m  ]	Install Packages			 ##"
+			echo -e "## [ \e[32mXIII\e[39m ]	Edit Kernel cmdl			 ##"
+			echo -e "## [ \e[32mXIV\e[39m  ]	Edit runlevels***			 ##"
+			echo -e "## [ \e[32mXV\e[39m   ]	Return back  				 ##"
+			echo "##							 ##"
+			echo -e "## [  \e[32mT\e[39m   ]				Terminal	 ##"
+			echo "##							 ##"
+			echo "###########################################################"
+			;;
+		9)
+			echo -e "##################  \e[94m~~Select Default~~\e[39m   ##################"
+			echo "##						         ##"
+			echo -e "## [ \e[32mI\e[39m  ]	List systems		                 ##"
+			echo -e "## [ \e[32mII\e[39m ]	Edit default				 ##"
+			echo -e "## [ \e[32mIII\e[39m]	Return back				 ##"
+			echo "##							 ##"
+			echo -e "## [ \e[32mT\e[39m  ]				Terminal	 ##"
+			echo "##							 ##"
+			echo "###########################################################"
+			;;
+		10)
+			echo -e "###################  \e[94m~~Catalyst~~\e[39m   #################"
+			echo "##						   ##"
+			echo -e "## [ \e[32mI\e[39m  ]	Configure catalyst.conf	           ##"
+			echo -e "## [ \e[32mII\e[39m ]	Configure catalystrc		   ##"
+			echo -e "## [ \e[32mIII\e[39m]	Configure stage1  		   ##"
+			echo -e "## [ \e[32mIV\e[39m ]	Configure stage2  		   ##"
+			echo -e "## [ \e[32mV\e[39m  ]	Configure stage3  		   ##"
+			echo -e "## [ \e[32mVI\e[39m ]	Return  			   ##"
+			echo "##						   ##"
+			echo -e "## [ \e[32mT\e[39m  ]		  		Terminal   ##"
+			echo "##						   ##"
+			echo "#####################################################"
+			;;
+	esac
+}
+
+# CHECK IF BASH IS THE DEFAULT {CURRENT} SHELL, ISSUE A WARNING OTHERIWSE
+shl_f() {
+	SHL=$SHELL
+	ISITBASH=$(echo "${SHL}" |  awk -F "bin/" '{ print $2}')
+	if [[ ${ISITBASH} != "bash" ]]; then
+		echo "Seems like you are not using bash"
+		echo "Keep in mind that all scripts from this project are written for bash interpretation"
+		while true; do
+			read -p "Do you want to continue?: " S
+			case ${S} in
+				[Yy][eE][sS]|[yY]) clear; break;;
+				[Nn][oO]|[nN]) echo "Exiting..."; exit;;
+				* ) echo  "Select Y/N";;
+			esac
+		done
+	fi
+}
+
+# ROOT CHECK FUNCTION, IS NEEDED FOR THE CATALYST AND CHROOT PROCESS
+amiroot() {
+	if [[ "$1" != "0" ]]
+	then
+		echo "This operation requires root privileges"
+		echo "Returning back..."
+		sleep 2
+		BACKTO="MM"
+	fi
+}
+
+# MAIN MENU FUNCTION
+main_f() {
+	while true; do
+		clear; men_opt 1
+		read -p "Please select an option: " SELCT
+		case ${SELCT:-6} in
+			I|i|1|-I|-i|-1)
+				# CALL BUILDER SUBMENU
+				bs_menu_f; break;;
+			II|ii|2|-II|-ii|-2)
+				# CALL CONTROLLER SUBMENU
+				con_f; break;;
+	 		III|iii|3|-III|-iii|-3)
+				# CALL DOCUMENTATION SUBMENU
+				doc_f; break;;
+			IV|iv|4|-IV|-iv|-4)
+				# CALL ABOUT SUBMENU
+				about_f; break;;
+			V|v|5|-V|-v|-5[Qq][uU][iI][tT]|[Ee][Xx][Ii][tT]|[qQ])
+ 				echo -e "\e[32mExiting\e[39m..."; BACKTO="Q";;
+ 			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="MM" 
+  				clear; break;;
+			* ) clear; men_opt 1;;
+		esac
+	done
+}
+
+# BUILDER SUBMENU
+bs_menu_f() {
+	clear; men_opt 5
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-4} in
+			I|i|1|-I|-i|-1)
+				# CALL BUILD SYSTEM SUBMENU
+				clear; bs_f
+				break;;
+			II|ii|2|-II|-ii|-2)
+				# CALL CONFIGURATION SUBMENU
+				clear; config_f
+				break;;
+			III|iii|3|-III|-iii|-3)
+				# CALL SELECT DEFAULT SYSTEM SUBMENU
+				clear; selectdef_f
+				break;;
+			IV|iv|4|-IV|-iv|-4)
+				# TBU: WILL INCLUDE A STAGE4 TARBALL CREATION
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="BSM";
+				break;;
+			V|v|5)
+				clear; BACKTO="MM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="BSM";
+  				clear; break;;
+			* ) clear; men_opt 5;;
+		esac
+	done
+}
+
+# BUILD SYSTEM SUBMENU
+bs_f() {
+clear; men_opt 6
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-3} in
+			I|i|1|-I|-i|-1)
+				# CALL PORTAGE SUBMENU
+				portage_men_f
+				break;;
+			II|ii|2|-II|-ii|-2)
+				# CALL CATALYST SUBMENU
+				catalyst_f
+				break;;
+			III|iii|3|-III|-iii|-3)
+				# START MAIN BUILDER PROCESS
+				clear; source "${WORKDIR}/scripts/sinit"
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="SM";
+				break;;
+			IV|iv|4|-IV|-iv|-4)
+				clear; BACKTO="BSM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="SM";
+  				clear; break;;
+			* ) clear; men_opt 6;;
+		esac
+	done
+}
+
+# PORTAGE SUBMENU
+portage_men_f() {
+	clear; men_opt 7
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-5} in
+			I|i|1|-I|-i|-1)
+				# MAKE MAKE.CONF: AUTOMATIC OR GUIDED CONFIGURATION
+				makeconf_ed &&{ clear; echo -e "[\e[32m*\e[0m] Configurations was successful!"
+				echo "Presh any key to return"; } || { cho -e "[\e[31m*\e[0m] Something went wrong"; }
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			II|ii|2|-II|-ii|-2)
+				# MANUAL EDIT OF MAKE.CONF
+				cp "${CONFDIR}/system/portage/makeconf.backup" "${CONFDIR}/system/portage/make.conf"
+				vim "${CONFDIR}/system/portage/make.conf"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			III|iii|3|-III|-iii|-3)
+				# PREVIW OF MAKE.CONF: WILL BE REMOVED AS AN OPTION
+				less "${CONFDIR}/system/portage/make.conf"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			IV|iv|4|-IV|-iv|-4)
+				# MANUAL EDIT OF USEFLAGS
+				vim "${CONFDIR}/system/portage/package.use/sysbuild"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			V|v|5|-V|-v|-5)
+				# PREVIEW OF USEFLAGS: WILL BE REMOVED AS AN OPTION
+				less "${CONFDIR}/system/portage/package.use/sysbuild"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			VI|vi|6|-VI|-vi|-6)
+				# REGENERATES MAKE.CONF TO DEFAULT
+				cp "${CONFDIR}/system/portage/package.use/sysbuild.backup" "${CONFDIR}/system/portage/package.use/sysbuild"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="PORT_M"; break;;
+			VII|vii|7|-VII|-vii|-7)
+				BACKTO="SM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="PORT_M";
+  				clear; break;;
+			* ) clear; men_opt 7;;
+		esac
+	done
+}
+
+catalyst_f() {
+	clear; men_opt 10
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-6} in
+			I|i|1|-I|-i|-1)
+				# CONFIGURE CATALYST.CONF
+				vim "${CONFDIR}/system/catalyst/catalyst.conf"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CATA_M"; break;;
+			II|ii|2|-II|-ii|-2)
+				# CONFIGURE CATALYSTRC
+				vim "${CONFDIR}/system/catalyst/catalystrc"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CATA_M"; break;;
+			III|iii|3|-III|-iii|-3)
+				# CONFIGURE STAGE1.SPEC
+				vim "${CONFDIR}/system/catalyst/stage1.spec"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CATA_M"; break;;
+			IV|iv|4|-IV|-iv|-4)
+				# CONFIGURE STAGE2.SPEC
+				vim "${CONFDIR}/system/catalyst/stage2.spec"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CATA_M"; break;;
+			V|v|5|-V|-v|-5)
+				# CONFIGURE STAGE3.SPEC
+				vim "${CONFDIR}/system/catalyst/stage3.spec"
+				clear; echo "Presh any key to return"
+				read -r 1>&-; BACKTO="CATA_M"; break;;
+			VI|vi|6|-VI|-vi|-6)
+				BACKTO="SM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="PORT_M";
+  				clear; break;;
+			* ) clear; men_opt 7;;
+		esac
+	done
+}
+# CONFIGURATION SUBMENU
+config_f() {
+	clear; men_opt 8
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-3} in
+			I|i|1|-I|-i|-1)
+				# GUIDED FSTAB EDITOR
+				drv_interface
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			II|ii|2|-II|-ii|-2)
+				# MANUAL FSTAB EDIT
+				vim "${CONFDIR}/system/fstab"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			III|iii|3|-III|-iii|-3)
+				# DEVICES FOR BOOT, SYSTEM, USERDATA: RELATED ONLY WITH THE HOSTS
+				vim "${CONFDIR}/system/devname.info"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			IV|iv|4|-IV|-iv|-4)
+				# HOSTNAME
+				vim "${CONFDIR}/system/hostname"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			V|v|5|-V|-v|-5)
+				# NETWORKING
+				vim "${CONFDIR}/system/net"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			VI|vi|6|-VI|-vi|-6)
+				# LOCALES
+				vim "${CONFDIR}/system/locale.gen"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			VII|vii|7)
+				# CONSOLEFONTS
+				vim "${CONFDIR}/system/consolefont"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			VIII|viii|8)
+				# SSHD CONFIGURATION FILE
+				vim "${CONFDIR}/system/sshd"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			IX|ix|9)
+				# SSH PUBLIC KEY: WILL BE INCLUDED ON THE HOSTS
+				vim "${CONFDIR}/system/ssh.pub"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			X|x|10)
+				# SETS SYMLINKS, BIND MOUNTS, TMPFS AND OVERLAYS
+				vim "${CONFDIR}/system/system_links"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			XI|xi|11)
+				# SETS CUSTOM USER SCRIPTS ON BOOTUP
+				vim "${CONFDIR}/system/custom_scripts"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			XII|xii|12)
+				# LIST FOR CUSTOM PACKAGES TO BE INSTALLED DURING THE PROCESS
+				vim "${CONFDIR}/system/custom_pacl"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			XIII|xiii|13)
+				# KERNEL COMAND LINE
+				vim "${CONFDIR}/system/kernel-cmdl"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			XIV|xiv|14)
+				# UPDATES RUNLEVEL ENTRIES
+				vim "${CONFDIR}/system/runlevels"
+				clear; echo -e "[\e[32m*\e[0m] Presh any key to return"
+				read -r 1>&-; BACKTO="CO_F"; break;;
+			XV|xv|15)
+				BACKTO="BSM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="CO_F";
+  				clear; break;;
+			* ) clear; men_opt 8;;
+		esac
+	done
+}
+
+# SELECT DEFAULT SYSTEM MENU
+selectdef_f() {
+	#show list of local builds
+	#add imput for setting default
+		#will change the dist system-arch-version to system-arch-version-default
+		#same for kernel-arch-version
+	clear; men_opt 9
+	while true; do
+		read -p "Select an option: " SELCT
+		case ${SELCT:-3} in
+			I|i|1|-I|-i|-1)
+				clear; echo "Documentations submenu option a)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="SELDEF"; break;;
+			II|ii|2|-II|-ii|-2)
+				clear; echo "Documentations submenu option b)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="SELDEF"; break;;
+			III|iii|3|-III|-iii|-3)
+				clear; BACKTO="BSM"; break;;
+			[tT])
+				clear; /bin/bash
+				echo "Presh any key to return"
+				read -r 1>&-;BACKTO="SELDEF";
+  				clear; break;;
+			* ) clear; men_opt 9;;
+		esac
+	done
+}
+
+# THE CONTROLLER MENU
+con_f() {
+	clear; amiroot "$UID"; echo "You selected: build the controller image"; echo
+	source cinit.sh
+	BACKTO="MM"
+}
+
+# DOCUMENTATIONS MENU
+doc_f(){
+	clear; echo "	      Documentations. Please enjoy yourself!"; echo
+	men_opt 2
+	while true; do
+		read -p "Choose a document you wish to read: " SELCT
+		case ${SELCT:-5} in
+			I|i|1|-I|-i|-1)
+				clear; echo "Documentations submenu option a)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="DOC"; break;;
+			II|ii|2|-II|-ii|-2)
+				clear; echo "Documentations submenu option b)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="DOC"; break;;
+			III|iii|3|-III|-iii|-3)
+				clear; echo "Documentations submenu option c)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="DOC"; break;;
+			IV|iv|4|-IV|-iv|-4)
+				clear; echo "Documentations submenu option d)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="DOC"; break;;
+			V|v|5|-V|-v|-5)
+				clear; echo "Documentations submenu option e)"
+				BACKTO="MM"; break;;
+			* ) clear; men_opt 2;;
+		esac
+	done
+}
+
+# ABOUT MENU
+about_f() {
+	clear; echo "		     Welcome to About Menu"; echo
+	men_opt 3
+	while true; do
+		read -p "Choose a journey: " SELCT
+		case ${SELCT:-4} in
+			I|i|1|-I|-i|-1)
+				clear; echo "About submenu option a)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="AB"; break;;
+			II|ii|2|-II|-ii|-2)
+				clear; echo "About submenu option b)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="AB"; break;;
+			III|iii|3|-III|-iii|-3)
+				clear; echo "About submenu option c)"
+				echo "Presh any key to return"
+				read -r 1>&-; BACKTO="AB"; break;;
+			IV|iv|4|-IV|-iv|-4)
+				clear; echo "About submenu option d)"
+				BACKTO="MM"; break;;
+			* ) clear; men_opt 3;;
+		esac
+	done
+}
+
+# MAIN LOOP FUNCTION
+mainlp_f() {
+BACKTO="MM"
+while true; do
+	case "${BACKTO:-MM}" in
+		MM)
+			# PULLS MAIN MENU FUNCTION
+			main_f;;
+		DOC)
+			# PULLS DOCUMENTATION MENU FUNCTION
+			doc_f;;
+		AB)
+			# PULLS ABOUT MENU FUNCTION
+			about_f;;
+		PORT_M)
+			# PULLS PORTAGE SUBMENU FUNCTION
+			portage_men_f;;
+		CATA_M)
+			catalyst_f;;
+		SM)
+			# PULLS BUILD SYSTEM SUBMENU: THIS IS A SUBMENU OF BULDERS MENU
+			bs_f;;
+		BSM)
+			# PULLS BUILDER MENU
+			bs_menu_f;;
+		CO_F)
+			# PULLS CONFIGURATION SUBMENU: SUBMENU OF BUILDERS MENU
+			config_f;;
+		SELDEF)
+			# PULLS SELECT DEFAULT SYSTEM SUBMENU: SUBMENU OF BUILDERS MENU
+			selectdef_f;;
+		Q)
+			exit 0;;
+	esac
+done
+}
+
+# STARTS MAIN LOOP FUNCTION
+mainlp_f; unset BACKTO; exit 0
diff --git a/config.d/system/catalyst/catalyst.conf b/config.d/system/catalyst/catalyst.conf
new file mode 100644
index 0000000..91522c3
--- /dev/null
+++ b/config.d/system/catalyst/catalyst.conf
@@ -0,0 +1,100 @@
+# /etc/catalyst/catalyst.conf
+
+# Simple desriptions of catalyst settings. Please refer to the online
+# documentation for more information.
+
+# Creates a .DIGESTS file containing the hash output from any of the supported
+# options below.  Adding them all may take a long time.
+# Supported hashes:
+# adler32, crc32, crc32b, gost, haval128, haval160, haval192, haval224,
+# haval256, md2, md4, md5, ripemd128, ripemd160, ripemd256, ripemd320, sha1,
+# sha224, sha256, sha384, sha512, snefru128, snefru256, tiger, tiger128,
+# tiger160, whirlpool
+digests="md5 sha1 sha512 whirlpool"
+
+# Creates a .CONTENTS file listing the contents of the file. Pick from any of
+# the supported options below:
+# auto		- strongly recommended
+# tar-tv	- does 'tar tvf FILE'
+# tar-tvz	- does 'tar tvzf FILE'
+# tar-tvy	- does 'tar tvyf FILE'
+# isoinfo-l	- does 'isoinfo -l -i FILE'
+# isoinfo-f	- does 'isoinfo -f -i FILE'
+# 'isoinfo-f' is the only option not chosen by the automatic algorithm.
+# If this variable is empty, no .CONTENTS will be generated at all.
+contents="auto"
+
+# distdir specifies where your distfiles are located. This setting should
+# work fine for most default installations.
+distdir="/usr/portage/distfiles"
+
+# envscript allows users to set options such as http proxies, MAKEOPTS,
+# GENTOO_MIRRORS, or any other environment variables needed for building.
+# The envscript file sets environment variables like so:
+# export FOO="bar"
+envscript="/etc/catalyst/catalystrc"
+
+# Internal hash function catalyst should use for things like autoresume,
+# seedcache, etc.  The default and fastest is crc32.  You should not ever need
+# to change this unless your OS does not support it.
+# Supported hashes:
+# adler32, crc32, crc32b, gost, haval128, haval160, haval192, haval224,
+# haval256, md2, md4, md5, ripemd128, ripemd160, ripemd256, ripemd320, sha1,
+# sha224, sha256, sha384, sha512, snefru128, snefru256, tiger, tiger128,
+# tiger160, whirlpool
+hash_function="crc32"
+
+# options set different build-time options for catalyst. Some examples are:
+# autoresume = Attempt to resume a failed build, clear the autoresume flags with
+#	the -a option to the catalyst cmdline.  -p will clear the autoresume flags
+#	as well as your pkgcache and kerncache
+#	( This option is not fully tested, bug reports welcome )
+# bindist = enables the bindist USE flag, please see package specific definition,
+#	however, it is suggested to enable this if redistributing builds.
+# ccache = enables build time ccache support
+# distcc = enable distcc support for building. You have to set distcc_hosts in
+# 	your spec file.
+# icecream = enables icecream compiler cluster support for building
+# kerncache = keeps a tbz2 of your built kernel and modules (useful if your
+#	build stops in livecd-stage2)
+# pkgcache = keeps a tbz2 of every built package (useful if your build stops
+#	prematurely)
+# preserve_libs = enables portage to preserve used libs when unmerging packages
+#   (used on installcd-stage2 and stage4 targets)
+# seedcache = use the build output of a previous target if it exists to speed up
+#	the copy
+# snapcache = cache the snapshot so that it can be bind-mounted into the chroot.
+#	WARNING: moving parts of the portage tree from within fsscript *will* break
+#	your cache. The cache is unlinked before any empty or rm processing, though.
+#
+# (These options can be used together)
+options="autoresume bindist kerncache pkgcache seedcache snapcache distcc" #ccache"
+
+# portdir specifies the source portage tree used by the snapshot target.
+portdir="/usr/portage"
+
+# sharedir specifies where all of the catalyst runtime executables are. Most
+# users do not need to change this.
+sharedir="/usr/lib64/catalyst"
+
+# snapshot_cache specifies where the snapshots will be cached to if snapcache is
+# enabled in the options.
+#snapshot_cache="/var/tmp/catalyst/snapshot_cache"
+snapshot_cache="/mnt/gentoo/catalyst/snapshot_cache"
+
+# storedir specifies where catalyst will store everything that it builds, and
+# also where it will put its temporary files and caches.
+#storedir="/var/tmp/catalyst" 
+storedir="/mnt/gentoo/catalyst"
+
+# port_logdir is where all build logs will be kept. This dir will be automatically cleaned
+# of all logs over 30 days old. If left undefined the logs will remain in the build directory
+# as usual and get cleaned every time a stage build is restarted.
+#port_logdir="/var/tmp/catalyst/tmp"
+port_logdir="/mnt/gentoo/catalyst/tmp"
+
+# var_tmpfs_portage will mount a tmpfs for /var/tmp/portage so building takes place in RAM
+# this feature requires a pretty large tmpfs ({open,libre}office needs ~8GB to build)
+# WARNING: If you use too much RAM everything will fail horribly and it is not our fault.
+# set size of /var/tmp/portage tmpfs in gigabytes
+# var_tmpfs_portage=16
diff --git a/config.d/system/catalyst/catalystrc b/config.d/system/catalyst/catalystrc
new file mode 100644
index 0000000..2bc82eb
--- /dev/null
+++ b/config.d/system/catalyst/catalystrc
@@ -0,0 +1,7 @@
+#!/bin/bash
+# This is an example catalystrc. As such, it doesn't actually *do* anything.
+
+# Uncomment the following to increase the number of threads used to compile.
+# export MAKEOPTS="-j16"
+
+
diff --git a/config.d/system/catalyst/stage1.spec b/config.d/system/catalyst/stage1.spec
new file mode 100644
index 0000000..400e9b4
--- /dev/null
+++ b/config.d/system/catalyst/stage1.spec
@@ -0,0 +1,11 @@
+subarch: amd64
+target: stage1
+version_stamp: GSE
+rel_type: default
+profile: default/linux/amd64/13.0
+# DO NOT EDIT SNAPSHOT ENTRY
+snapshot: AUTOEDITED
+source_subpath: default/GSE
+update_seed: yes
+update_seed_command: --update --deep @world
+
diff --git a/config.d/system/catalyst/stage2.spec b/config.d/system/catalyst/stage2.spec
new file mode 100644
index 0000000..3237e47
--- /dev/null
+++ b/config.d/system/catalyst/stage2.spec
@@ -0,0 +1,8 @@
+subarch: amd64
+target: stage2
+version_stamp: GSE
+rel_type: default
+profile: default/linux/amd64/13.0
+# DO NOT EDIT SNAPSHOT ENTRY
+snapshot: AUTOEDITED
+source_subpath: default/GSE
diff --git a/config.d/system/catalyst/stage3.spec b/config.d/system/catalyst/stage3.spec
new file mode 100644
index 0000000..58d0ef4
--- /dev/null
+++ b/config.d/system/catalyst/stage3.spec
@@ -0,0 +1,8 @@
+subarch: amd64
+target: stage3
+version_stamp: GSE
+rel_type: default
+profile: default/linux/amd64/13.0
+# DO NOT EDIT SNAPSHOT ENTRY
+snapshot: AUTOEDITED
+source_subpath: default/GSE
diff --git a/config.d/system/consolefont b/config.d/system/consolefont
new file mode 100644
index 0000000..3dd7db5
--- /dev/null
+++ b/config.d/system/consolefont
@@ -0,0 +1,19 @@
+# The consolefont service is not activated by default. If you need to
+# use it, you should run "rc-update add consolefont boot" as root.
+#
+# consolefont specifies the default font that you'd like Linux to use on the
+# console.  You can find a good selection of fonts in /usr/share/consolefonts;
+# you shouldn't specify the trailing ".psf.gz", just the font name below.
+# To use the default console font, comment out the CONSOLEFONT setting below.
+consolefont="eurlatgr"
+
+# consoletranslation is the charset map file to use.  Leave commented to use
+# the default one.  Have a look in /usr/share/consoletrans for a selection of
+# map files you can use.
+#consoletranslation="8859-1_to_uni"
+
+# unicodemap is the unicode map file to use. Leave commented to use the
+# default one. Have a look in /usr/share/unimaps for a selection of map files
+# you can use.
+#unicodemap="iso01"
+
diff --git a/config.d/system/custom_pacl b/config.d/system/custom_pacl
new file mode 100644
index 0000000..61c2bb3
--- /dev/null
+++ b/config.d/system/custom_pacl
@@ -0,0 +1,9 @@
+# Custom package list
+# Include here the packages you want to be emerged.
+# Note: You are building a stateless system, which implies that many rootfs areas will be read only. 
+# The more complex you make your system, the highest the chance of breaking the setup will be.
+#
+# Always include packages that require sane write permissions or configure them accordingly to support such a system
+# Also remember to update the USEFLAGS from the Portage menu entry and keep in mind that USE flags often conflict!
+# Add the full package name and category, otherwise on ebuilds with same name from different categories the process wont be able to proceed.
+# Example: foo-category/bar-portage_package
\ No newline at end of file
diff --git a/config.d/system/custom_scripts b/config.d/system/custom_scripts
new file mode 100644
index 0000000..9cf0de1
--- /dev/null
+++ b/config.d/system/custom_scripts
@@ -0,0 +1 @@
+# TBU
diff --git a/config.d/system/devname.info b/config.d/system/devname.info
new file mode 100644
index 0000000..532158b
--- /dev/null
+++ b/config.d/system/devname.info
@@ -0,0 +1,3 @@
+BOOT /dev/sda
+SYS /dev/sdb
+USERDATA /dev/sdc
diff --git a/config.d/system/fstab b/config.d/system/fstab
new file mode 100644
index 0000000..4d9314b
--- /dev/null
+++ b/config.d/system/fstab
@@ -0,0 +1,47 @@
+# /etc/fstab: static file system information.
+#
+# noatime turns off atimes for increased performance (atimes normally aren't 
+# needed); notail increases performance of ReiserFS (at the expense of storage 
+# efficiency).  It's safe to drop the noatime options if you want and to 
+# switch between notail / tail freely.
+#
+# The root filesystem should have a pass number of either 0 or 1.
+# All other filesystems should have a pass number of 0 or greater than 1.
+#
+# See the manpage fstab(5) for more information.
+#
+
+# <fs>                  <mountpoint>    <type>          <opts>          <dump/pass>
+
+# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
+#
+# NOTE: Even though we list ext4 as the type here, it will work with ext2/ext3
+#       filesystems.  This just tells the kernel to use the ext4 driver.
+#
+# NOTE: You can use full paths to devices like /dev/sda3, but it is often
+#       more reliable to use filesystem labels or UUIDs. See your filesystem
+#       documentation for details on setting a label. To obtain the UUID, use
+#       the blkid(8) command.
+
+#LABEL=boot             /boot           ext4            noauto,noatime  1 2
+#UUID=58e72203-57d1-4497-81ad-97655bd56494              /               ext4            noatime         0 1
+#LABEL=swap             none            swap            sw              0 0
+#/dev/cdrom             /mnt/cdrom      auto            noauto,ro       0 0
+
+# BOOT
+LABEL=BOOT /boot btrfs ro,noatime,subvol=/bootfs 0 0
+
+# SYSTEM
+LABEL=SYSTEM / btrfs ro,noatime,subvol=/sysfs 0 0
+
+# USER-DATA
+LABEL=USERDATA /user-data btrfs	defaults,noatime,subvol=/userdata 0 0
+
+# HOME
+/user-data/persistent/home /home/ none rw,bind 0 0
+
+# HOME
+tmpfs /var/tmp tmpfs nodev,nosuid,size=512M 0 0
+
+# HOME
+tmpfs /tmp tmpfs nodev,nosuid,size=512M 0 0
diff --git a/config.d/system/fstab.info b/config.d/system/fstab.info
new file mode 100644
index 0000000..f6023e8
--- /dev/null
+++ b/config.d/system/fstab.info
@@ -0,0 +1,3 @@
+BOOT btrfs
+SYS btrfs
+USERDATA btrfs
diff --git a/config.d/system/hostname b/config.d/system/hostname
new file mode 100644
index 0000000..f2a3bc9
--- /dev/null
+++ b/config.d/system/hostname
@@ -0,0 +1,3 @@
+# Set to the hostname of this machine
+hostname="You.forgot.me"
+
diff --git a/config.d/system/kernel-conf b/config.d/system/kernel-conf
new file mode 100644
index 0000000..b886bed
--- /dev/null
+++ b/config.d/system/kernel-conf
@@ -0,0 +1,6032 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/x86 4.9.16-gentoo Kernel Configuration
+#
+
+#
+# Gentoo Linux
+#
+CONFIG_GENTOO_LINUX=y
+CONFIG_GENTOO_LINUX_UDEV=y
+CONFIG_GENTOO_LINUX_PORTAGE=y
+
+#
+# Support for init systems, system and service managers
+#
+CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
+# CONFIG_GENTOO_LINUX_INIT_SYSTEMD is not set
+CONFIG_64BIT=y
+CONFIG_X86_64=y
+CONFIG_X86=y
+CONFIG_INSTRUCTION_DECODER=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_MMU=y
+CONFIG_ARCH_MMAP_RND_BITS_MIN=28
+CONFIG_ARCH_MMAP_RND_BITS_MAX=32
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ZONE_DMA32=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_X86_64_SMP=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_DEBUG_RODATA=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_IRQ_WORK=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_THREAD_INFO_IN_TASK=y
+
+#
+# General setup
+#
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_FHANDLE=y
+CONFIG_USELIB=y
+CONFIG_AUDIT=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_WATCH=y
+CONFIG_AUDIT_TREE=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+
+#
+# Timers subsystem
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ_COMMON=y
+# CONFIG_HZ_PERIODIC is not set
+CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+
+#
+# CPU/Task time and stats accounting
+#
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_RCU_EXPERT is not set
+CONFIG_SRCU=y
+# CONFIG_TASKS_RCU is not set
+CONFIG_RCU_STALL_COMMON=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_BUILD_BIN2C=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+CONFIG_NMI_LOG_BUF_SHIFT=13
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
+CONFIG_ARCH_SUPPORTS_INT128=y
+CONFIG_CGROUPS=y
+CONFIG_PAGE_COUNTER=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_SWAP_ENABLED=y
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+CONFIG_CGROUP_WRITEBACK=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_CGROUP_PIDS is not set
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_HUGETLB is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_HAVE_UID16=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_HAVE_PCSPKR_PLATFORM=y
+CONFIG_BPF=y
+# CONFIG_EXPERT is not set
+CONFIG_UID16=y
+CONFIG_MULTIUSER=y
+CONFIG_SGETMASK_SYSCALL=y
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_NMI=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_USERFAULTFD is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_MEMBARRIER=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SYSTEM_DATA_VERIFICATION=y
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_KEXEC_CORE=y
+CONFIG_OPROFILE=m
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_OPROFILE_NMI_TIMER=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+CONFIG_OPTPROBES=y
+CONFIG_KPROBES_ON_FTRACE=y
+# CONFIG_UPROBES is not set
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_KRETPROBES=y
+CONFIG_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_KPROBES_ON_FTRACE=y
+CONFIG_HAVE_NMI=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
+CONFIG_HAVE_USER_RETURN_NOTIFIER=y
+CONFIG_HAVE_PERF_EVENTS_NMI=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_GCC_PLUGINS=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
+CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+CONFIG_HAVE_EXIT_THREAD=y
+CONFIG_ARCH_MMAP_RND_BITS=28
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_STACK_VALIDATION=y
+# CONFIG_HAVE_ARCH_HASH is not set
+# CONFIG_ISA_BUS_API is not set
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_VMAP_STACK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULE_SIG=y
+# CONFIG_MODULE_SIG_FORCE is not set
+CONFIG_MODULE_SIG_ALL=y
+CONFIG_MODULE_SIG_SHA1=y
+# CONFIG_MODULE_SIG_SHA224 is not set
+# CONFIG_MODULE_SIG_SHA256 is not set
+# CONFIG_MODULE_SIG_SHA384 is not set
+# CONFIG_MODULE_SIG_SHA512 is not set
+CONFIG_MODULE_SIG_HASH="sha1"
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+CONFIG_MODULES_TREE_LOOKUP=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
+CONFIG_ASN1=y
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_INLINE_READ_UNLOCK=y
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_INLINE_WRITE_UNLOCK=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_ZONE_DMA=y
+CONFIG_SMP=y
+CONFIG_X86_FEATURE_NAMES=y
+CONFIG_X86_FAST_FEATURE_TESTS=y
+CONFIG_X86_MPPARSE=y
+# CONFIG_GOLDFISH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
+# CONFIG_X86_VSMP is not set
+# CONFIG_X86_GOLDFISH is not set
+# CONFIG_X86_INTEL_MID is not set
+# CONFIG_MLX_PLATFORM is not set
+# CONFIG_X86_INTEL_LPSS is not set
+# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
+CONFIG_IOSF_MBI=m
+# CONFIG_IOSF_MBI_DEBUG is not set
+CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_HYPERVISOR_GUEST is not set
+CONFIG_NO_BOOTMEM=y
+# CONFIG_MK8 is not set
+# CONFIG_MPSC is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MATOM is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_INTERNODE_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=64
+CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR=y
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_DMI=y
+# CONFIG_GART_IOMMU is not set
+# CONFIG_CALGARY_IOMMU is not set
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_MAXSMP=y
+CONFIG_NR_CPUS=8192
+# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_MC=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_INTEL=y
+CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
+CONFIG_X86_MCE_INJECT=m
+CONFIG_X86_THERMAL_VECTOR=y
+
+#
+# Performance monitoring
+#
+CONFIG_PERF_EVENTS_INTEL_UNCORE=y
+CONFIG_PERF_EVENTS_INTEL_RAPL=y
+CONFIG_PERF_EVENTS_INTEL_CSTATE=y
+# CONFIG_PERF_EVENTS_AMD_POWER is not set
+# CONFIG_VM86 is not set
+CONFIG_X86_16BIT=y
+CONFIG_X86_ESPFIX64=y
+CONFIG_X86_VSYSCALL_EMULATION=y
+CONFIG_I8K=m
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_X86_MSR=m
+CONFIG_X86_CPUID=m
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_X86_DIRECT_GBPAGES=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+# CONFIG_ARCH_MEMORY_PROBE is not set
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
+# CONFIG_MEMORY_HOTREMOVE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
+CONFIG_MEMORY_BALLOON=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_HWPOISON_INJECT=m
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+# CONFIG_CLEANCACHE is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
+# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
+# CONFIG_IDLE_PAGE_TRACKING is not set
+CONFIG_FRAME_VECTOR=y
+CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
+CONFIG_ARCH_HAS_PKEYS=y
+# CONFIG_X86_PMEM_LEGACY is not set
+# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
+CONFIG_X86_RESERVE_LOW=64
+CONFIG_MTRR=y
+CONFIG_MTRR_SANITIZER=y
+CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
+CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
+CONFIG_X86_PAT=y
+CONFIG_ARCH_USES_PG_UNCACHED=y
+CONFIG_ARCH_RANDOM=y
+CONFIG_X86_SMAP=y
+# CONFIG_X86_INTEL_MPX is not set
+CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_MIXED is not set
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_KEXEC_JUMP is not set
+CONFIG_PHYSICAL_START=0x1000000
+CONFIG_RELOCATABLE=y
+# CONFIG_RANDOMIZE_BASE is not set
+CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
+# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
+# CONFIG_COMPAT_VDSO is not set
+# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
+CONFIG_LEGACY_VSYSCALL_EMULATE=y
+# CONFIG_LEGACY_VSYSCALL_NONE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_MODIFY_LDT_SYSCALL=y
+CONFIG_HAVE_LIVEPATCH=y
+CONFIG_LIVEPATCH=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+
+#
+# Power management and ACPI options
+#
+CONFIG_ARCH_HIBERNATION_HEADER=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATE_CALLBACKS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_AUTOSLEEP=y
+# CONFIG_PM_WAKELOCKS is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_ACPI=y
+CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
+CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
+# CONFIG_ACPI_DEBUGGER is not set
+CONFIG_ACPI_SLEEP=y
+# CONFIG_ACPI_PROCFS_POWER is not set
+CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_CPU_FREQ_PSS=y
+CONFIG_ACPI_PROCESSOR_CSTATE=y
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_IPMI=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
+CONFIG_ACPI_TABLE_UPGRADE=y
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_PCI_SLOT=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+CONFIG_ACPI_HOTPLUG_IOAPIC=y
+# CONFIG_ACPI_SBS is not set
+CONFIG_ACPI_HED=y
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+# CONFIG_ACPI_BGRT is not set
+# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
+# CONFIG_ACPI_NFIT is not set
+CONFIG_HAVE_ACPI_APEI=y
+CONFIG_HAVE_ACPI_APEI_NMI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_EINJ=m
+CONFIG_ACPI_APEI_ERST_DEBUG=m
+# CONFIG_DPTF_POWER is not set
+# CONFIG_ACPI_EXTLOG is not set
+# CONFIG_PMIC_OPREGION is not set
+# CONFIG_ACPI_CONFIGFS is not set
+# CONFIG_SFI is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# CPU Idle
+#
+CONFIG_CPU_IDLE=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_INTEL_IDLE=y
+
+#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
+#
+# Bus options (PCI etc.)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DIRECT=y
+# CONFIG_PCI_MMCONFIG is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIE_ECRC=y
+CONFIG_PCIEAER_INJECT=m
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
+CONFIG_PCI_BUS_ADDR_T_64BIT=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+CONFIG_PCI_STUB=y
+CONFIG_HT_IRQ=y
+CONFIG_PCI_ATS=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
+CONFIG_PCI_LABEL=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCI host controller drivers
+#
+# CONFIG_PCIE_DW_PLAT is not set
+# CONFIG_VMD is not set
+CONFIG_ISA_DMA_API=y
+CONFIG_AMD_NB=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_RAPIDIO is not set
+# CONFIG_X86_SYSFB is not set
+
+#
+# Executable file formats / Emulations
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_ELFCORE=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_BINFMT_SCRIPT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_COREDUMP=y
+CONFIG_IA32_EMULATION=y
+CONFIG_IA32_AOUT=y
+CONFIG_X86_X32=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_KEYS_COMPAT=y
+CONFIG_X86_DEV_DMA_OPS=y
+CONFIG_PMC_ATOM=y
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+CONFIG_NET_INGRESS=y
+CONFIG_NET_EGRESS=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM=y
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_ROUTE_CLASSID=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IP_TUNNEL=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_NET_UDP_TUNNEL=m
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+# CONFIG_INET_DIAG_DESTROY is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+# CONFIG_TCP_CONG_NV is not set
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_TCP_CONG_DCTCP is not set
+# CONFIG_TCP_CONG_CDG is not set
+# CONFIG_TCP_CONG_BBR is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+# CONFIG_IPV6_ILA is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+# CONFIG_IPV6_VTI is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_GRE is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+# CONFIG_IPV6_SUBTREES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=m
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_INGRESS=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_ACCT=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CONNTRACK_LABELS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_BROADCAST=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_REDIRECT is not set
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+# CONFIG_NF_TABLES_NETDEV is not set
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+# CONFIG_NFT_NUMGEN is not set
+CONFIG_NFT_CT=m
+# CONFIG_NFT_SET_RBTREE is not set
+# CONFIG_NFT_SET_HASH is not set
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+# CONFIG_NFT_MASQ is not set
+# CONFIG_NFT_REDIR is not set
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+# CONFIG_NFT_QUOTA is not set
+# CONFIG_NFT_REJECT is not set
+# CONFIG_NFT_REJECT_INET is not set
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+CONFIG_NETFILTER_XT_TARGET_LED=m
+# CONFIG_NETFILTER_XT_TARGET_LOG is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_NAT is not set
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ECN=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+# CONFIG_IP_SET_HASH_IPMARK is not set
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+# CONFIG_IP_SET_HASH_MAC is not set
+# CONFIG_IP_SET_HASH_NETPORTNET is not set
+CONFIG_IP_SET_HASH_NET=m
+# CONFIG_IP_SET_HASH_NETNET is not set
+CONFIG_IP_SET_HASH_NETPORT=m
+# CONFIG_IP_SET_HASH_NETIFACE is not set
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+# CONFIG_IP_VS_FO is not set
+# CONFIG_IP_VS_OVF is not set
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS SH scheduler
+#
+CONFIG_IP_VS_SH_TAB_BITS=8
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_VS_PE_SIP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+# CONFIG_NFT_REJECT_IPV4 is not set
+# CONFIG_NFT_DUP_IPV4 is not set
+# CONFIG_NF_TABLES_ARP is not set
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_LOG_ARP is not set
+# CONFIG_NF_LOG_IPV4 is not set
+CONFIG_NF_REJECT_IPV4=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+# CONFIG_IP_NF_NAT is not set
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+# CONFIG_NFT_REJECT_IPV6 is not set
+# CONFIG_NFT_DUP_IPV6 is not set
+# CONFIG_NF_DUP_IPV6 is not set
+CONFIG_NF_REJECT_IPV6=m
+# CONFIG_NF_LOG_IPV6 is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+# CONFIG_IP6_NF_NAT is not set
+CONFIG_NF_TABLES_BRIDGE=m
+# CONFIG_NFT_BRIDGE_META is not set
+# CONFIG_NF_LOG_BRIDGE is not set
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
+CONFIG_SCTP_COOKIE_HMAC_MD5=y
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_INET_SCTP_DIAG=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+# CONFIG_RDS_DEBUG is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_VLAN_FILTERING is not set
+CONFIG_HAVE_NET_DSA=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_VLAN_8021Q_MVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+CONFIG_PHONET=m
+# CONFIG_6LOWPAN is not set
+CONFIG_IEEE802154=m
+# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
+CONFIG_IEEE802154_SOCKET=m
+# CONFIG_MAC802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+# CONFIG_NET_SCH_SFB is not set
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+# CONFIG_NET_SCH_CHOKE is not set
+CONFIG_NET_SCH_QFQ=m
+# CONFIG_NET_SCH_CODEL is not set
+# CONFIG_NET_SCH_FQ_CODEL is not set
+# CONFIG_NET_SCH_FQ is not set
+# CONFIG_NET_SCH_HHF is not set
+# CONFIG_NET_SCH_PIE is not set
+CONFIG_NET_SCH_INGRESS=m
+# CONFIG_NET_SCH_PLUG is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+# CONFIG_NET_CLS_BPF is not set
+# CONFIG_NET_CLS_FLOWER is not set
+# CONFIG_NET_CLS_MATCHALL is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+# CONFIG_NET_EMATCH_CANID is not set
+# CONFIG_NET_EMATCH_IPSET is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+# CONFIG_NET_ACT_CSUM is not set
+# CONFIG_NET_ACT_VLAN is not set
+# CONFIG_NET_ACT_BPF is not set
+# CONFIG_NET_ACT_CONNMARK is not set
+# CONFIG_NET_ACT_SKBMOD is not set
+# CONFIG_NET_ACT_IFE is not set
+# CONFIG_NET_ACT_TUNNEL_KEY is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+CONFIG_DCB=y
+CONFIG_DNS_RESOLVER=m
+# CONFIG_BATMAN_ADV is not set
+CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=m
+CONFIG_OPENVSWITCH_VXLAN=m
+# CONFIG_VSOCKETS is not set
+# CONFIG_NETLINK_DIAG is not set
+CONFIG_MPLS=y
+CONFIG_NET_MPLS_GSO=m
+# CONFIG_MPLS_ROUTING is not set
+# CONFIG_HSR is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_NET_NCSI is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+CONFIG_SOCK_CGROUP_DATA=y
+# CONFIG_CGROUP_NET_PRIO is not set
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_BQL=y
+# CONFIG_BPF_JIT is not set
+CONFIG_NET_FLOW_LIMIT=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_TCPPROBE is not set
+CONFIG_NET_DROP_MONITOR=y
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_GW=m
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=m
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=m
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_LEDS is not set
+# CONFIG_CAN_C_CAN is not set
+# CONFIG_CAN_CC770 is not set
+# CONFIG_CAN_IFI_CANFD is not set
+# CONFIG_CAN_M_CAN is not set
+CONFIG_CAN_SJA1000=m
+CONFIG_CAN_SJA1000_ISA=m
+CONFIG_CAN_SJA1000_PLATFORM=m
+# CONFIG_CAN_EMS_PCMCIA is not set
+CONFIG_CAN_EMS_PCI=m
+# CONFIG_CAN_PEAK_PCMCIA is not set
+# CONFIG_CAN_PEAK_PCI is not set
+CONFIG_CAN_KVASER_PCI=m
+# CONFIG_CAN_PLX_PCI is not set
+# CONFIG_CAN_SOFTING is not set
+
+#
+# CAN USB interfaces
+#
+CONFIG_CAN_EMS_USB=m
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_GS_USB is not set
+# CONFIG_CAN_KVASER_USB is not set
+# CONFIG_CAN_PEAK_USB is not set
+# CONFIG_CAN_8DEV_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HS=y
+CONFIG_BT_LE=y
+# CONFIG_BT_LEDS is not set
+# CONFIG_BT_SELFTEST is not set
+CONFIG_BT_DEBUGFS=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_INTEL=m
+CONFIG_BT_BCM=m
+CONFIG_BT_RTL=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_BCM=y
+CONFIG_BT_HCIBTUSB_RTL=y
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_LL=y
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_INTEL is not set
+# CONFIG_BT_HCIUART_BCM is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_CRDA_SUPPORT=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_CFG80211_WEXT_EXPORT=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+CONFIG_NET_9P_RDMA=m
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_NFC is not set
+# CONFIG_LWTUNNEL is not set
+CONFIG_DST_CACHE=y
+# CONFIG_NET_DEVLINK is not set
+CONFIG_MAY_USE_DEVLINK=y
+CONFIG_HAVE_EBPF_JIT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
+CONFIG_WANT_DEV_COREDUMP=y
+CONFIG_ALLOW_DEV_COREDUMP=y
+CONFIG_DEV_COREDUMP=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=m
+CONFIG_DMA_SHARED_BUFFER=y
+# CONFIG_FENCE_TRACE is not set
+
+#
+# Bus devices
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AR7_PARTS=m
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+# CONFIG_SM_FTL is not set
+CONFIG_MTD_OOPS=m
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+# CONFIG_MTD_ESB2ROM is not set
+# CONFIG_MTD_CK804XROM is not set
+CONFIG_MTD_SCB2_FLASH=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_L440GX is not set
+CONFIG_MTD_PCI=m
+# CONFIG_MTD_PCMCIA is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_LATCH_ADDR is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_NAND_ECC=m
+CONFIG_MTD_NAND_ECC_SMC=y
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_DENALI_PCI is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_RICOH is not set
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_NANDSIM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+# CONFIG_MTD_NAND_MTK is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR & LPDDR2 PCM memory drivers
+#
+CONFIG_MTD_LPDDR=m
+CONFIG_MTD_QINFO_PROBE=m
+# CONFIG_MTD_SPI_NOR is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_OF is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
+CONFIG_BLK_DEV_FD=m
+# CONFIG_PARIDE is not set
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SKD is not set
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_SX8=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=m
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+CONFIG_NVME_CORE=m
+CONFIG_BLK_DEV_NVME=m
+# CONFIG_BLK_DEV_NVME_SCSI is not set
+# CONFIG_NVME_RDMA is not set
+# CONFIG_NVME_TARGET is not set
+
+#
+# Misc devices
+#
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+CONFIG_ICS932S401=m
+CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_HP_ILO is not set
+# CONFIG_APDS9802ALS is not set
+CONFIG_ISL29003=m
+# CONFIG_ISL29020 is not set
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_SRAM is not set
+# CONFIG_PANEL is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
+CONFIG_CB710_CORE=m
+# CONFIG_CB710_DEBUG is not set
+CONFIG_CB710_DEBUG_ASSUMPTIONS=y
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_I2C is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+# CONFIG_INTEL_MEI is not set
+# CONFIG_INTEL_MEI_ME is not set
+# CONFIG_INTEL_MEI_TXE is not set
+# CONFIG_VMWARE_VMCI is not set
+
+#
+# Intel MIC Bus Driver
+#
+# CONFIG_INTEL_MIC_BUS is not set
+
+#
+# SCIF Bus Driver
+#
+# CONFIG_SCIF_BUS is not set
+
+#
+# VOP Bus Driver
+#
+# CONFIG_VOP_BUS is not set
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
+# SCIF Driver
+#
+
+#
+# Intel MIC Coprocessor State Management (COSM) Drivers
+#
+
+#
+# VOP Driver
+#
+# CONFIG_GENWQE is not set
+# CONFIG_ECHO is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_MQ_DEFAULT is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2X_FCOE=m
+CONFIG_BE2ISCSI=m
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_HPSA=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_3W_SAS=m
+# CONFIG_SCSI_ACARD is not set
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVSAS_TASKLET is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_SCSI_ARCMSR=m
+# CONFIG_SCSI_ESAS2R is not set
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_MPT3SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+CONFIG_SCSI_MPT3SAS_MAX_SGE=128
+CONFIG_SCSI_MPT2SAS=m
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_UFSHCD is not set
+CONFIG_SCSI_HPTIOP=m
+# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_VMWARE_PVSCSI=m
+CONFIG_LIBFC=m
+CONFIG_LIBFCOE=m
+CONFIG_FCOE=m
+CONFIG_FCOE_FNIC=m
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+CONFIG_SCSI_ISCI=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_STEX=m
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA_FC=m
+# CONFIG_TCM_QLA2XXX is not set
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_WD719X is not set
+CONFIG_SCSI_DEBUG=m
+CONFIG_SCSI_PMCRAID=m
+CONFIG_SCSI_PM8001=m
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_VIRTIO=m
+# CONFIG_SCSI_CHELSIO_FCOE is not set
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_ATA_ACPI=y
+# CONFIG_SATA_ZPODD is not set
+CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI=m
+# CONFIG_SATA_AHCI_PLATFORM is not set
+CONFIG_SATA_INIC162X=m
+# CONFIG_SATA_ACARD_AHCI is not set
+CONFIG_SATA_SIL24=m
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_PDC_ADMA=m
+CONFIG_SATA_QSTOR=m
+CONFIG_SATA_SX4=m
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_DWC is not set
+CONFIG_SATA_MV=m
+CONFIG_SATA_NV=m
+CONFIG_SATA_PROMISE=m
+CONFIG_SATA_SIL=m
+CONFIG_SATA_SIS=m
+CONFIG_SATA_SVW=m
+CONFIG_SATA_ULI=m
+CONFIG_SATA_VIA=m
+CONFIG_SATA_VITESSE=m
+
+#
+# PATA SFF controllers with BMDMA
+#
+CONFIG_PATA_ALI=m
+CONFIG_PATA_AMD=m
+CONFIG_PATA_ARTOP=m
+CONFIG_PATA_ATIIXP=m
+CONFIG_PATA_ATP867X=m
+CONFIG_PATA_CMD64X=m
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_PATA_HPT366=m
+CONFIG_PATA_HPT37X=m
+CONFIG_PATA_HPT3X2N=m
+CONFIG_PATA_HPT3X3=m
+# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_IT821X=m
+CONFIG_PATA_JMICRON=m
+CONFIG_PATA_MARVELL=m
+CONFIG_PATA_NETCELL=m
+CONFIG_PATA_NINJA32=m
+# CONFIG_PATA_NS87415 is not set
+CONFIG_PATA_OLDPIIX=m
+# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PDC2027X=m
+CONFIG_PATA_PDC_OLD=m
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RDC=m
+CONFIG_PATA_SCH=m
+CONFIG_PATA_SERVERWORKS=m
+CONFIG_PATA_SIL680=m
+CONFIG_PATA_SIS=m
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+CONFIG_PATA_ACPI=m
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_LEGACY is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+# CONFIG_MD_MULTIPATH is not set
+CONFIG_MD_FAULTY=m
+# CONFIG_MD_CLUSTER is not set
+# CONFIG_BCACHE is not set
+CONFIG_BLK_DEV_DM_BUILTIN=y
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_MQ_DEFAULT is not set
+CONFIG_DM_DEBUG=y
+CONFIG_DM_BUFIO=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
+CONFIG_DM_BIO_PRISON=m
+CONFIG_DM_PERSISTENT_DATA=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+# CONFIG_DM_CACHE is not set
+# CONFIG_DM_ERA is not set
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+# CONFIG_DM_VERITY is not set
+# CONFIG_DM_SWITCH is not set
+# CONFIG_DM_LOG_WRITES is not set
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+# CONFIG_TCM_USER2 is not set
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_TCM_FC=m
+# CONFIG_ISCSI_TARGET is not set
+# CONFIG_SBP_TARGET is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_SBP2=m
+CONFIG_FIREWIRE_NET=m
+# CONFIG_FIREWIRE_NOSY is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=m
+CONFIG_NET_CORE=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+# CONFIG_EQUALIZER is not set
+CONFIG_NET_FC=y
+CONFIG_IFB=m
+# CONFIG_NET_TEAM is not set
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+# CONFIG_GENEVE is not set
+# CONFIG_GTP is not set
+# CONFIG_MACSEC is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_TUN=m
+# CONFIG_TUN_VNET_CROSS_LE is not set
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+# CONFIG_NLMON is not set
+CONFIG_SUNGEM_PHY=m
+# CONFIG_ARCNET is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
+
+#
+# CAIF transport drivers
+#
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_MDIO=m
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_AGERE=y
+# CONFIG_ET131X is not set
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
+# CONFIG_ENA_ETHERNET is not set
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_AMD8111_ETH=m
+CONFIG_PCNET32=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+# CONFIG_ALX is not set
+# CONFIG_NET_VENDOR_AURORA is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_MACB is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+# CONFIG_BCMGENET is not set
+CONFIG_BNX2=m
+CONFIG_CNIC=m
+CONFIG_TIGON3=m
+CONFIG_BNX2X=m
+CONFIG_BNX2X_SRIOV=y
+# CONFIG_BNXT is not set
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_BNA=m
+CONFIG_NET_VENDOR_CAVIUM=y
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_LIQUIDIO is not set
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_CHELSIO_T4=m
+# CONFIG_CHELSIO_T4_DCB is not set
+# CONFIG_CHELSIO_T4VF is not set
+CONFIG_CHELSIO_LIB=m
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_ENIC=m
+# CONFIG_CX_ECAT is not set
+CONFIG_DNET=m
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_BE2NET=m
+CONFIG_BE2NET_HWMON=y
+CONFIG_NET_VENDOR_EZCHIP=y
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_S2IO=m
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_NET_VENDOR_HP=y
+# CONFIG_HP100 is not set
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_E1000E_HWTS=y
+CONFIG_IGB=m
+CONFIG_IGB_HWMON=y
+CONFIG_IGB_DCA=y
+CONFIG_IGBVF=m
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBE_DCA=y
+CONFIG_IXGBE_DCB=y
+CONFIG_IXGBEVF=m
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_FM10K is not set
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_JME=m
+CONFIG_NET_VENDOR_MARVELL=y
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+# CONFIG_SKGE_GENESIS is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_EN_DCB=y
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLXSW_CORE is not set
+CONFIG_NET_VENDOR_MICREL=y
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_MYRI10GE=m
+CONFIG_MYRI10GE_DCA=y
+CONFIG_FEALNX=m
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NATSEMI=m
+CONFIG_NS83820=m
+CONFIG_NET_VENDOR_NETRONOME=y
+# CONFIG_NFP_NETVF is not set
+CONFIG_NET_VENDOR_8390=y
+CONFIG_PCMCIA_AXNET=m
+CONFIG_NE2K_PCI=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_FORCEDETH=m
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_ETHOC=m
+CONFIG_NET_PACKET_ENGINE=y
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLCNIC_SRIOV=y
+CONFIG_QLCNIC_DCB=y
+CONFIG_QLCNIC_HWMON=y
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+# CONFIG_QED is not set
+CONFIG_NET_VENDOR_QUALCOMM=y
+# CONFIG_QCOM_EMAC is not set
+CONFIG_NET_VENDOR_REALTEK=y
+# CONFIG_ATP is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R8169=m
+CONFIG_NET_VENDOR_RENESAS=y
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_R6040=m
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+# CONFIG_SXGBE_ETH is not set
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_SC92031=m
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_SIS900=m
+CONFIG_SIS190=m
+CONFIG_SFC=m
+CONFIG_SFC_MTD=y
+CONFIG_SFC_MCDI_MON=y
+CONFIG_SFC_SRIOV=y
+CONFIG_SFC_MCDI_LOGGING=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_EPIC100=m
+# CONFIG_SMSC911X is not set
+CONFIG_SMSC9420=m
+CONFIG_NET_VENDOR_STMICRO=y
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NIU=m
+CONFIG_NET_VENDOR_SYNOPSYS=y
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_TEHUTI=m
+CONFIG_NET_VENDOR_TI=y
+# CONFIG_TI_CPSW_ALE is not set
+CONFIG_TLAN=m
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_VELOCITY=m
+CONFIG_NET_VENDOR_WIZNET=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_NET_VENDOR_XIRCOM=y
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+# CONFIG_SKFP is not set
+# CONFIG_HIPPI is not set
+# CONFIG_NET_SB1000 is not set
+CONFIG_PHYLIB=m
+CONFIG_SWPHY=y
+
+#
+# MDIO bus device drivers
+#
+# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BITBANG=m
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_THUNDER is not set
+
+#
+# MII PHY device drivers
+#
+# CONFIG_AMD_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+CONFIG_BCM_NET_PHYLIB=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+CONFIG_FIXED_PHY=m
+CONFIG_ICPLUS_PHY=m
+# CONFIG_INTEL_XWAY_PHY is not set
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=m
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+# CONFIG_TERANETICS_PHY is not set
+CONFIG_VITESSE_PHY=m
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+# CONFIG_PPTP is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLHC=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_LAN78XX is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_CDC_NCM=m
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SR9700 is not set
+# CONFIG_USB_NET_SR9800 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+CONFIG_USB_HSO=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_CDC_PHONET=m
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_NET_CH9200 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_ADMTEK=y
+CONFIG_ADM8211=m
+CONFIG_ATH_COMMON=m
+CONFIG_WLAN_VENDOR_ATH=y
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_TRACER is not set
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K_BTCOEX_SUPPORT=y
+CONFIG_ATH9K=m
+CONFIG_ATH9K_PCI=y
+# CONFIG_ATH9K_AHB is not set
+# CONFIG_ATH9K_DEBUGFS is not set
+# CONFIG_ATH9K_DYNACK is not set
+# CONFIG_ATH9K_WOW is not set
+CONFIG_ATH9K_RFKILL=y
+# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
+CONFIG_ATH9K_PCOEM=y
+CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
+# CONFIG_ATH9K_HWRNG is not set
+CONFIG_CARL9170=m
+CONFIG_CARL9170_LEDS=y
+CONFIG_CARL9170_WPC=y
+# CONFIG_CARL9170_HWRNG is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_AR5523 is not set
+# CONFIG_WIL6210 is not set
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
+CONFIG_WLAN_VENDOR_ATMEL=y
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AT76C50X_USB=m
+CONFIG_WLAN_VENDOR_BROADCOM=y
+CONFIG_B43=m
+CONFIG_B43_BCMA=y
+CONFIG_B43_SSB=y
+CONFIG_B43_BUSES_BCMA_AND_SSB=y
+# CONFIG_B43_BUSES_BCMA is not set
+# CONFIG_B43_BUSES_SSB is not set
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_G=y
+# CONFIG_B43_PHY_N is not set
+CONFIG_B43_PHY_LP=y
+# CONFIG_B43_PHY_HT is not set
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+CONFIG_B43_DEBUG=y
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+# CONFIG_BRCMFMAC is not set
+# CONFIG_BRCM_TRACING is not set
+# CONFIG_BRCMDBG is not set
+CONFIG_WLAN_VENDOR_CISCO=y
+CONFIG_AIRO=m
+CONFIG_AIRO_CS=m
+CONFIG_WLAN_VENDOR_INTEL=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IWLEGACY=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+
+#
+# iwl3945 / iwl4965 Debugging Options
+#
+# CONFIG_IWLEGACY_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLWIFI_LEDS=y
+CONFIG_IWLDVM=m
+CONFIG_IWLMVM=m
+CONFIG_IWLWIFI_OPMODE_MODULAR=y
+# CONFIG_IWLWIFI_BCAST_FILTERING is not set
+# CONFIG_IWLWIFI_PCIE_RTPM is not set
+
+#
+# Debugging Options
+#
+# CONFIG_IWLWIFI_DEBUG is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
+CONFIG_WLAN_VENDOR_INTERSIL=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
+CONFIG_HERMES=m
+CONFIG_HERMES_PRISM=y
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_ORINOCO_USB is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+# CONFIG_PRISM54 is not set
+CONFIG_WLAN_VENDOR_MARVELL=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_MESH is not set
+CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM_USB=m
+# CONFIG_MWIFIEX is not set
+CONFIG_MWL8K=m
+CONFIG_WLAN_VENDOR_MEDIATEK=y
+# CONFIG_MT7601U is not set
+CONFIG_WLAN_VENDOR_RALINK=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+CONFIG_RT2800PCI_RT53XX=y
+CONFIG_RT2800PCI_RT3290=y
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT33XX=y
+CONFIG_RT2800USB_RT35XX=y
+# CONFIG_RT2800USB_RT3573 is not set
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RT2800_LIB=m
+CONFIG_RT2800_LIB_MMIO=m
+CONFIG_RT2X00_LIB_MMIO=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WLAN_VENDOR_REALTEK=y
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL8187_LEDS=y
+CONFIG_RTL_CARDS=m
+# CONFIG_RTL8192CE is not set
+# CONFIG_RTL8192SE is not set
+# CONFIG_RTL8192DE is not set
+# CONFIG_RTL8723AE is not set
+# CONFIG_RTL8723BE is not set
+# CONFIG_RTL8188EE is not set
+# CONFIG_RTL8192EE is not set
+# CONFIG_RTL8821AE is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8XXXU is not set
+CONFIG_WLAN_VENDOR_RSI=y
+# CONFIG_RSI_91X is not set
+CONFIG_WLAN_VENDOR_ST=y
+# CONFIG_CW1200 is not set
+CONFIG_WLAN_VENDOR_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+# CONFIG_WL18XX is not set
+CONFIG_WLCORE=m
+# CONFIG_WLCORE_SDIO is not set
+CONFIG_WILINK_PLATFORM_DATA=y
+CONFIG_WLAN_VENDOR_ZYDAS=y
+CONFIG_USB_ZD1201=m
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_PCMCIA_RAYCS is not set
+CONFIG_PCMCIA_WL3501=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+
+#
+# WiMAX Wireless Broadband devices
+#
+CONFIG_WIMAX_I2400M=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
+CONFIG_WAN=y
+# CONFIG_LANMEDIA is not set
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+# CONFIG_HDLC_RAW_ETH is not set
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+
+#
+# X.25/LAPB support is disabled
+#
+# CONFIG_PCI200SYN is not set
+# CONFIG_WANXL is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+# CONFIG_SBNI is not set
+CONFIG_IEEE802154_DRIVERS=m
+CONFIG_VMXNET3=m
+# CONFIG_FUJITSU_ES is not set
+CONFIG_ISDN=y
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+# CONFIG_ISDN_PPP_BSDCOMP is not set
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DIVERSION=m
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_TELESPCI=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NETJET=y
+CONFIG_HISAX_NETJET_U=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_HFC_PCI=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+CONFIG_HISAX_ENTERNOW_PCI=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+CONFIG_HISAX_SEDLBAUER_CS=m
+CONFIG_HISAX_ELSA_CS=m
+CONFIG_HISAX_AVM_A1_CS=m
+CONFIG_HISAX_TELES_CS=m
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+# CONFIG_HISAX_HFCUSB is not set
+CONFIG_HISAX_HFC4S8S=m
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_ISDN_CAPI=m
+# CONFIG_CAPI_TRACE is not set
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPIDRV=m
+# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+# CONFIG_CAPI_EICON is not set
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_CAPI=y
+# CONFIG_GIGASET_I4L is not set
+# CONFIG_GIGASET_DUMMYLL is not set
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+CONFIG_GIGASET_M101=m
+# CONFIG_GIGASET_DEBUG is not set
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+CONFIG_MISDN=m
+CONFIG_MISDN_DSP=m
+CONFIG_MISDN_L1OIP=m
+
+#
+# mISDN hardware drivers
+#
+CONFIG_MISDN_HFCPCI=m
+CONFIG_MISDN_HFCMULTI=m
+CONFIG_MISDN_HFCUSB=m
+CONFIG_MISDN_AVMFRITZ=m
+CONFIG_MISDN_SPEEDFAX=m
+CONFIG_MISDN_INFINEON=m
+CONFIG_MISDN_W6692=m
+CONFIG_MISDN_NETJET=m
+CONFIG_MISDN_IPAC=m
+CONFIG_MISDN_ISAR=m
+CONFIG_ISDN_HDLC=m
+# CONFIG_NVM is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_LEDS=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
+CONFIG_INPUT_MATRIXKMAP=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5588=m
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+CONFIG_KEYBOARD_MAX7359=m
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OPENCORES=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_BYD=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_CYPRESS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_PS2_SENTELIC=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_FOCALTECH=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_SYNAPTICS_I2C=m
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+# CONFIG_TABLET_USB_HANWANG is not set
+CONFIG_TABLET_USB_KBTAB=m
+# CONFIG_TABLET_USB_PEGASUS is not set
+# CONFIG_TABLET_SERIAL_WACOM4 is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_PROPERTIES=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
+# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+CONFIG_TOUCHSCREEN_EETI=m
+# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_ILI210X is not set
+CONFIG_TOUCHSCREEN_GUNZE=m
+# CONFIG_TOUCHSCREEN_EKTF2127 is not set
+# CONFIG_TOUCHSCREEN_ELAN is not set
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_WACOM_W8001=m
+# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
+# CONFIG_TOUCHSCREEN_MAX11801 is not set
+CONFIG_TOUCHSCREEN_MCS5000=m
+# CONFIG_TOUCHSCREEN_MMS114 is not set
+# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_TOUCHSCREEN_SILEAD is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_SUR40 is not set
+# CONFIG_TOUCHSCREEN_SX8654 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MPU3050 is not set
+CONFIG_INPUT_APANEL=m
+CONFIG_INPUT_ATLAS_BTNS=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+# CONFIG_INPUT_KXTJ9 is not set
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+# CONFIG_RMI4_CORE is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_USERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_TTY=y
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_NOZOMI=m
+# CONFIG_ISI is not set
+CONFIG_N_HDLC=m
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+# CONFIG_DEVKMEM is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_PNP=y
+# CONFIG_SERIAL_8250_FINTEK is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DMA=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+# CONFIG_SERIAL_8250_FSL is not set
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_LPSS=y
+CONFIG_SERIAL_8250_MID=y
+# CONFIG_SERIAL_8250_MOXA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_KGDB_NMI is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_JSM=m
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+CONFIG_PPDEV=m
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=y
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=y
+# CONFIG_IPMI_SSIF is not set
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
+CONFIG_HW_RANDOM_VIA=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_HW_RANDOM_TPM=y
+CONFIG_NVRAM=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_MWAVE is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_HPET is not set
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_CORE=y
+CONFIG_TCG_TIS=y
+# CONFIG_TCG_TIS_I2C_ATMEL is not set
+# CONFIG_TCG_TIS_I2C_INFINEON is not set
+# CONFIG_TCG_TIS_I2C_NUVOTON is not set
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+# CONFIG_TCG_INFINEON is not set
+# CONFIG_TCG_CRB is not set
+# CONFIG_TCG_VTPM_PROXY is not set
+# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
+CONFIG_TELCLOCK=m
+CONFIG_DEVPORT=y
+# CONFIG_XILLYBUS is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_REG is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_SMBUS=m
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_I801=m
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_ISMT is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_NFORCE2=m
+# CONFIG_I2C_NFORCE2_S4985 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# ACPI drivers
+#
+# CONFIG_I2C_SCMI is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_PXA_PCI is not set
+CONFIG_I2C_SIMTEC=m
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_STUB=m
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+# CONFIG_SPMI is not set
+# CONFIG_HSI is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
+
+#
+# PPS clients support
+#
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_PARPORT is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+CONFIG_PTP_1588_CLOCK=m
+# CONFIG_DP83640_PHY is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_POWER_RESET is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BATTERY_BQ27XXX is not set
+CONFIG_BATTERY_MAX17040=m
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ABITUGURU=m
+CONFIG_SENSORS_ABITUGURU3=m
+CONFIG_SENSORS_AD7414=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+CONFIG_SENSORS_ADT7462=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7475=m
+# CONFIG_SENSORS_ASC7621 is not set
+CONFIG_SENSORS_K8TEMP=m
+CONFIG_SENSORS_K10TEMP=m
+CONFIG_SENSORS_FAM15H_POWER=m
+CONFIG_SENSORS_APPLESMC=m
+CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
+# CONFIG_SENSORS_DS620 is not set
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_DELL_SMM=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_FSCHMD=m
+# CONFIG_SENSORS_FTSTEUTATES is not set
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_G760A=m
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_HIH6130 is not set
+CONFIG_SENSORS_IBMAEM=m
+CONFIG_SENSORS_IBMPEX=m
+# CONFIG_SENSORS_I5500 is not set
+CONFIG_SENSORS_CORETEMP=m
+CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+CONFIG_SENSORS_LTC4215=m
+# CONFIG_SENSORS_LTC4222 is not set
+CONFIG_SENSORS_LTC4245=m
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+CONFIG_SENSORS_MAX1619=m
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+CONFIG_SENSORS_LM63=m
+# CONFIG_SENSORS_LM73 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+# CONFIG_SENSORS_LM95234 is not set
+CONFIG_SENSORS_LM95241=m
+# CONFIG_SENSORS_LM95245 is not set
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+CONFIG_SENSORS_ADS7828=m
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_INA209 is not set
+# CONFIG_SENSORS_INA2XX is not set
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_TC74 is not set
+CONFIG_SENSORS_THMC50=m
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+CONFIG_SENSORS_TMP401=m
+CONFIG_SENSORS_TMP421=m
+CONFIG_SENSORS_VIA_CPUTEMP=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+# CONFIG_SENSORS_W83795 is not set
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+
+#
+# ACPI drivers
+#
+# CONFIG_SENSORS_ACPI_POWER is not set
+CONFIG_SENSORS_ATK0110=m
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_WRITABLE_TRIPS=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_GOV_STEP_WISE=y
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+CONFIG_THERMAL_GOV_USER_SPACE=y
+# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_INTEL_POWERCLAMP is not set
+CONFIG_X86_PKG_TEMP_THERMAL=m
+# CONFIG_INTEL_SOC_DTS_THERMAL is not set
+
+#
+# ACPI INT340X thermal drivers
+#
+# CONFIG_INT340X_THERMAL is not set
+# CONFIG_INTEL_PCH_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_WDAT_WDT is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+CONFIG_ALIM1535_WDT=m
+CONFIG_ALIM7101_WDT=m
+# CONFIG_F71808E_WDT is not set
+# CONFIG_SP5100_TCO is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+CONFIG_IBMASR=m
+# CONFIG_WAFER_WDT is not set
+CONFIG_I6300ESB_WDT=m
+# CONFIG_IE6XX_WDT is not set
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
+CONFIG_IT8712F_WDT=m
+CONFIG_IT87_WDT=m
+CONFIG_HP_WATCHDOG=m
+CONFIG_HPWDT_NMI_DECODING=y
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_NV_TCO is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_CPU5_WDT is not set
+CONFIG_SMSC_SCH311X_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_VIA_WDT is not set
+CONFIG_W83627HF_WDT=m
+CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
+CONFIG_MACHZ_WDT=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_NI903X_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+# CONFIG_BCMA_HOST_SOC is not set
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+# CONFIG_BCMA_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=m
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_LPC_ICH=m
+# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_INTEL_LPSS_ACPI is not set
+# CONFIG_MFD_INTEL_LPSS_PCI is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_SI476X_CORE is not set
+CONFIG_MFD_SM501=m
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+CONFIG_REGULATOR_LP3971=m
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+CONFIG_REGULATOR_MAX1586=m
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+CONFIG_REGULATOR_TPS65023=m
+CONFIG_REGULATOR_TPS6507X=m
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2=m
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF2_CORE=m
+CONFIG_VIDEOBUF2_MEMOPS=m
+CONFIG_VIDEOBUF2_VMALLOC=m
+CONFIG_DVB_CORE=m
+CONFIG_DVB_NET=y
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+CONFIG_DVB_DYNAMIC_MINORS=y
+
+#
+# Media drivers
+#
+CONFIG_MEDIA_USB_SUPPORT=y
+
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+# CONFIG_USB_GSPCA_DTCS033 is not set
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+# CONFIG_USB_GSPCA_NW80X is not set
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+# CONFIG_USB_GSPCA_SE401 is not set
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STK1135 is not set
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+# CONFIG_USB_GSPCA_VICAM is not set
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+# CONFIG_VIDEO_USBTV is not set
+
+#
+# Analog TV USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_USBVISION=m
+# CONFIG_VIDEO_STK1160_COMMON is not set
+# CONFIG_VIDEO_GO7007 is not set
+
+#
+# Analog/digital TV USB devices
+#
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_AU0828_V4L2=y
+
+#
+# Digital TV USB devices
+#
+# CONFIG_DVB_USB_V2 is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
+# CONFIG_DVB_AS102 is not set
+
+#
+# Webcam, TV (analog/digital) USB devices
+#
+CONFIG_VIDEO_EM28XX=m
+# CONFIG_VIDEO_EM28XX_V4L2 is not set
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_V4L_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_DVB_PLATFORM_DRIVERS is not set
+
+#
+# Supported MMC/SDIO adapters
+#
+CONFIG_SMS_SDIO_DRV=m
+
+#
+# Supported FireWire (IEEE 1394) Adapters
+#
+CONFIG_DVB_FIREDTV=m
+CONFIG_DVB_FIREDTV_INPUT=y
+CONFIG_MEDIA_COMMON_OPTIONS=y
+
+#
+# common driver options
+#
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_TVEEPROM=m
+# CONFIG_CYPRESS_FIRMWARE is not set
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_SMS_SIANO_MDTV=m
+# CONFIG_SMS_SIANO_DEBUGFS is not set
+
+#
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
+#
+CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
+CONFIG_MEDIA_ATTACH=y
+
+#
+# Audio decoders, processors and mixers
+#
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_SAA711X=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# Video encoders
+#
+
+#
+# Camera sensor devices
+#
+CONFIG_VIDEO_MT9M111=m
+
+#
+# Flash devices
+#
+
+#
+# Video improvement chips
+#
+
+#
+# Audio/Video compression chips
+#
+
+#
+# Miscellaneous helper chips
+#
+
+#
+# Sensors used on soc_camera driver
+#
+
+#
+# soc_camera sensor drivers
+#
+# CONFIG_SOC_CAMERA_IMX074 is not set
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_SOC_CAMERA_OV2640 is not set
+# CONFIG_SOC_CAMERA_OV5642 is not set
+# CONFIG_SOC_CAMERA_OV6650 is not set
+CONFIG_SOC_CAMERA_OV772X=m
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_XC4000=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_MEDIA_TUNER_SI2157=m
+CONFIG_MEDIA_TUNER_QM1D1C0042=m
+
+#
+# Multistandard (satellite) frontends
+#
+CONFIG_DVB_M88DS3103=m
+
+#
+# Multistandard (cable + terrestrial) frontends
+#
+CONFIG_DVB_DRXK=m
+CONFIG_DVB_TDA18271C2DD=m
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_CX24120=m
+CONFIG_DVB_TS2020=m
+CONFIG_DVB_TDA10071=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_DRXD=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_CXD2820R=m
+CONFIG_DVB_SI2168=m
+# CONFIG_DVB_AS102_FE is not set
+# CONFIG_DVB_GP8PSK_FE is not set
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_AU8522_DTV=m
+CONFIG_DVB_AU8522_V4L=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_S921=m
+CONFIG_DVB_MB86A20S=m
+
+#
+# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
+#
+CONFIG_DVB_TC90522=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_DRX39XYJ=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_A8293=m
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_VIA=y
+CONFIG_INTEL_GTT=y
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=64
+CONFIG_VGA_SWITCHEROO=y
+CONFIG_DRM=m
+CONFIG_DRM_MIPI_DSI=y
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_LOAD_EDID_FIRMWARE=y
+CONFIG_DRM_TTM=m
+
+#
+# I2C encoder or helper chips
+#
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+CONFIG_DRM_RADEON=m
+# CONFIG_DRM_RADEON_USERPTR is not set
+# CONFIG_DRM_AMDGPU is not set
+
+#
+# ACP (Audio CoProcessor) Configuration
+#
+CONFIG_DRM_NOUVEAU=m
+CONFIG_NOUVEAU_DEBUG=5
+CONFIG_NOUVEAU_DEBUG_DEFAULT=3
+CONFIG_DRM_NOUVEAU_BACKLIGHT=y
+CONFIG_DRM_I915=m
+# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
+CONFIG_DRM_I915_USERPTR=y
+# CONFIG_DRM_I915_GVT is not set
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_VMWGFX is not set
+# CONFIG_DRM_GMA500 is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_PANEL=y
+
+#
+# Display Panels
+#
+CONFIG_DRM_BRIDGE=y
+
+#
+# Display Interface Bridges
+#
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_LEGACY is not set
+
+#
+# Frame buffer Devices
+#
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_NOTIFY=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_VESA=y
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+# CONFIG_FB_S3 is not set
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=m
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_VIRTUAL=m
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SM712 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_APPLE is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+CONFIG_VGASTATE=m
+CONFIG_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_PCM_TIMER=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_PROC_FS=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_DMA_SGBUF=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_MTS64 is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+CONFIG_SND_MPU401=m
+# CONFIG_SND_PORTMAN2X4 is not set
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+CONFIG_SND_ALI5451=m
+# CONFIG_SND_ASIHPI is not set
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+# CONFIG_SND_CS4281 is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CTXFI=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+# CONFIG_SND_ES1938 is not set
+CONFIG_SND_ES1968=m
+# CONFIG_SND_ES1968_INPUT is not set
+# CONFIG_SND_FM801 is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+CONFIG_SND_INTEL8X0=m
+CONFIG_SND_INTEL8X0M=m
+CONFIG_SND_KORG1212=m
+# CONFIG_SND_LOLA is not set
+CONFIG_SND_LX6464ES=m
+CONFIG_SND_MAESTRO3=m
+# CONFIG_SND_MAESTRO3_INPUT is not set
+CONFIG_SND_MIXART=m
+# CONFIG_SND_NM256 is not set
+CONFIG_SND_PCXHR=m
+# CONFIG_SND_RIPTIDE is not set
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+# CONFIG_SND_SONICVIBES is not set
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+
+#
+# HD-Audio
+#
+CONFIG_SND_HDA=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+CONFIG_SND_HDA_INPUT_BEEP=y
+CONFIG_SND_HDA_INPUT_BEEP_MODE=1
+# CONFIG_SND_HDA_PATCH_LOADER is not set
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
+CONFIG_SND_HDA_CODEC_CA0132_DSP=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_CORE=m
+CONFIG_SND_HDA_DSP_LOADER=y
+CONFIG_SND_HDA_I915=y
+CONFIG_SND_HDA_PREALLOC_SIZE=512
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_USB_US122L=m
+CONFIG_SND_USB_6FIRE=m
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_VARIAX is not set
+CONFIG_SND_FIREWIRE=y
+# CONFIG_SND_DICE is not set
+# CONFIG_SND_OXFW is not set
+# CONFIG_SND_ISIGHT is not set
+# CONFIG_SND_FIREWORKS is not set
+# CONFIG_SND_BEBOB is not set
+# CONFIG_SND_FIREWIRE_DIGI00X is not set
+# CONFIG_SND_FIREWIRE_TASCAM is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID support
+#
+CONFIG_HID=y
+# CONFIG_HID_BATTERY_STRENGTH is not set
+CONFIG_HIDRAW=y
+# CONFIG_UHID is not set
+CONFIG_HID_GENERIC=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=y
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_BETOP_FF is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CMEDIA is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_HID_LOGITECH_DJ is not set
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+CONFIG_HID_WACOM=y
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_ALPS is not set
+
+#
+# USB HID support
+#
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# I2C HID support
+#
+# CONFIG_I2C_HID is not set
+
+#
+# Intel ISH HID support
+#
+# CONFIG_INTEL_ISH_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+CONFIG_USB_MON=y
+CONFIG_USB_WUSB=m
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_XHCI_PCI=m
+# CONFIG_USB_XHCI_PLATFORM is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_PCI=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1362_HCD=m
+# CONFIG_USB_FOTG210_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_PLATFORM is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_HCD_ISO is not set
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+# CONFIG_USB_HCD_BCMA is not set
+# CONFIG_USB_HCD_SSB is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+# CONFIG_USBIP_CORE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_ISP1760 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_SIMPLE is not set
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_F81232 is not set
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_METRO is not set
+CONFIG_USB_SERIAL_MOS7720=m
+# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MXUPORT is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QCAUX is not set
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_WWAN=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+# CONFIG_USB_SERIAL_XSENS_MT is not set
+# CONFIG_USB_SERIAL_WISHBONE is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_QT2 is not set
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+# CONFIG_USB_TRANCEVIBRATOR is not set
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+CONFIG_USB_ISIGHTFW=m
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_EZUSB_FX2=m
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_UCSI is not set
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=m
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_ULPI_BUS is not set
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+CONFIG_UWB_I1480U=m
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PCI=m
+CONFIG_MMC_RICOH_MMC=y
+# CONFIG_MMC_SDHCI_ACPI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_TIFM_SD=m
+CONFIG_MMC_SDRICOH_CS=m
+CONFIG_MMC_CB710=m
+CONFIG_MMC_VIA_SDMMC=m
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_MTK is not set
+CONFIG_MEMSTICK=m
+# CONFIG_MEMSTICK_DEBUG is not set
+
+#
+# MemoryStick drivers
+#
+# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
+CONFIG_MSPRO_BLOCK=m
+# CONFIG_MS_BLOCK is not set
+
+#
+# MemoryStick Host Controller Drivers
+#
+CONFIG_MEMSTICK_TIFM_MS=m
+CONFIG_MEMSTICK_JMICRON_38X=m
+CONFIG_MEMSTICK_R592=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP3944=m
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+CONFIG_LEDS_CLEVO_MAIL=m
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_INTEL_SS4200 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+# CONFIG_LEDS_LM355x is not set
+
+#
+# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
+#
+# CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_MLXCPLD is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_CPU is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_CXGB3=m
+# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_NES=m
+# CONFIG_INFINIBAND_NES_DEBUG is not set
+# CONFIG_INFINIBAND_OCRDMA is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_SRPT is not set
+CONFIG_INFINIBAND_ISER=m
+# CONFIG_INFINIBAND_RDMAVT is not set
+# CONFIG_RDMA_RXE is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EDAC=y
+CONFIG_EDAC_LEGACY_SYSFS=y
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_DECODE_MCE=m
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_EDAC_AMD64=m
+CONFIG_EDAC_AMD64_ERROR_INJECTION=y
+CONFIG_EDAC_E752X=m
+CONFIG_EDAC_I82975X=m
+CONFIG_EDAC_I3000=m
+CONFIG_EDAC_I3200=m
+# CONFIG_EDAC_IE31200 is not set
+CONFIG_EDAC_X38=m
+CONFIG_EDAC_I5400=m
+CONFIG_EDAC_I7CORE=m
+CONFIG_EDAC_I5000=m
+CONFIG_EDAC_I5100=m
+CONFIG_EDAC_I7300=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1307_HWMON=y
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
+CONFIG_RTC_DRV_DS1374=m
+# CONFIG_RTC_DRV_DS1374_WDT is not set
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+# CONFIG_RTC_DRV_ISL12022 is not set
+CONFIG_RTC_DRV_X1205=m
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+# CONFIG_RTC_DRV_RX8010 is not set
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RX8025=m
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+
+#
+# SPI RTC drivers
+#
+CONFIG_RTC_I2C_AND_SPI=m
+
+#
+# SPI and I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+CONFIG_RTC_DRV_DS1742=m
+# CONFIG_RTC_DRV_DS2404 is not set
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
+CONFIG_RTC_DRV_M48T59=m
+# CONFIG_RTC_DRV_MSM6242 is not set
+CONFIG_RTC_DRV_BQ4802=m
+# CONFIG_RTC_DRV_RP5C01 is not set
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# HID Sensor RTC drivers
+#
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DMA_ACPI=y
+# CONFIG_INTEL_IDMA64 is not set
+CONFIG_INTEL_IOATDMA=m
+# CONFIG_QCOM_HIDMA_MGMT is not set
+# CONFIG_QCOM_HIDMA is not set
+CONFIG_DW_DMAC_CORE=y
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_HSU_DMA=y
+
+#
+# DMA Clients
+#
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
+
+#
+# DMABUF options
+#
+# CONFIG_SYNC_FILE is not set
+CONFIG_DCA=m
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_CFAG12864B=m
+CONFIG_CFAG12864B_RATE=20
+# CONFIG_IMG_ASCII_LCD is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_DMEM_GENIRQ is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+# CONFIG_UIO_NETX is not set
+# CONFIG_UIO_PRUSS is not set
+# CONFIG_UIO_MF624 is not set
+# CONFIG_VFIO is not set
+CONFIG_IRQ_BYPASS_MANAGER=m
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRTIO=m
+
+#
+# Virtio drivers
+#
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_VIRTIO_INPUT is not set
+# CONFIG_VIRTIO_MMIO is not set
+
+#
+# Microsoft Hyper-V guest support
+#
+CONFIG_STAGING=y
+# CONFIG_SLICOSS is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_COMEDI is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTLLIB is not set
+# CONFIG_R8712U is not set
+# CONFIG_R8188EU is not set
+# CONFIG_RTS5208 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_SM750 is not set
+# CONFIG_FB_XGI is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_STAGING_MEDIA is not set
+
+#
+# Android
+#
+# CONFIG_LTE_GDM724X is not set
+# CONFIG_FIREWIRE_SERIAL is not set
+# CONFIG_LNET is not set
+# CONFIG_DGNC is not set
+# CONFIG_GS_FPGABOOT is not set
+# CONFIG_CRYPTO_SKEIN is not set
+# CONFIG_UNISYSSPAR is not set
+# CONFIG_WILC1000_SDIO is not set
+# CONFIG_MOST is not set
+
+#
+# Old ISDN4Linux (deprecated)
+#
+# CONFIG_KS7010 is not set
+# CONFIG_GREYBUS is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ACERHDF is not set
+# CONFIG_ALIENWARE_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_DELL_WMI_AIO is not set
+# CONFIG_DELL_SMO8800 is not set
+# CONFIG_DELL_RBTN is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_FUJITSU_TABLET is not set
+# CONFIG_AMILO_RFKILL is not set
+# CONFIG_HP_ACCEL is not set
+# CONFIG_HP_WIRELESS is not set
+# CONFIG_HP_WMI is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_IDEAPAD_LAPTOP is not set
+CONFIG_THINKPAD_ACPI=m
+CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
+# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
+# CONFIG_THINKPAD_ACPI_DEBUG is not set
+# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
+CONFIG_THINKPAD_ACPI_VIDEO=y
+CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ASUS_WIRELESS is not set
+CONFIG_ACPI_WMI=m
+# CONFIG_MSI_WMI is not set
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_TOSHIBA_BT_RFKILL is not set
+# CONFIG_TOSHIBA_HAPS is not set
+# CONFIG_TOSHIBA_WMI is not set
+# CONFIG_ACPI_CMPC is not set
+# CONFIG_INTEL_HID_EVENT is not set
+# CONFIG_INTEL_VBTN is not set
+CONFIG_INTEL_IPS=m
+# CONFIG_INTEL_PMC_CORE is not set
+# CONFIG_IBM_RTL is not set
+# CONFIG_SAMSUNG_LAPTOP is not set
+CONFIG_MXM_WMI=m
+# CONFIG_INTEL_OAKTRAIL is not set
+# CONFIG_SAMSUNG_Q10 is not set
+# CONFIG_APPLE_GMUX is not set
+# CONFIG_INTEL_RST is not set
+# CONFIG_INTEL_SMARTCONNECT is not set
+CONFIG_PVPANIC=y
+# CONFIG_INTEL_PMC_IPC is not set
+# CONFIG_SURFACE_PRO3_BUTTON is not set
+# CONFIG_INTEL_PUNIT_IPC is not set
+# CONFIG_CHROME_PLATFORMS is not set
+
+#
+# Hardware Spinlock drivers
+#
+
+#
+# Clock Source drivers
+#
+CONFIG_CLKEVT_I8253=y
+CONFIG_I8253_LOCK=y
+CONFIG_CLKBLD_I8253=y
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_EM_TIMER_STI is not set
+# CONFIG_MAILBOX is not set
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+
+#
+# Generic IOMMU Pagetable Support
+#
+CONFIG_IOMMU_IOVA=y
+CONFIG_AMD_IOMMU=y
+# CONFIG_AMD_IOMMU_V2 is not set
+# CONFIG_INTEL_IOMMU is not set
+# CONFIG_IRQ_REMAP is not set
+
+#
+# Remoteproc drivers
+#
+# CONFIG_STE_MODEM_RPROC is not set
+
+#
+# Rpmsg drivers
+#
+
+#
+# SOC (System On Chip) specific Drivers
+#
+
+#
+# Broadcom SoC drivers
+#
+# CONFIG_SUNXI_SRAM is not set
+# CONFIG_SOC_TI is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_EXTCON is not set
+# CONFIG_MEMORY is not set
+# CONFIG_IIO is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_PWM is not set
+CONFIG_ARM_GIC_MAX_NR=1
+# CONFIG_IPACK_BUS is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
+# CONFIG_MCB is not set
+
+#
+# Performance monitor support
+#
+CONFIG_RAS=y
+# CONFIG_MCE_AMD_INJ is not set
+# CONFIG_THUNDERBOLT is not set
+
+#
+# Android
+#
+# CONFIG_ANDROID is not set
+# CONFIG_LIBNVDIMM is not set
+CONFIG_NVMEM=m
+# CONFIG_STM is not set
+# CONFIG_INTEL_TH is not set
+
+#
+# FPGA Configuration Support
+#
+# CONFIG_FPGA is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_DMIID=y
+# CONFIG_DMI_SYSFS is not set
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
+# CONFIG_ISCSI_IBFT_FIND is not set
+# CONFIG_FW_CFG_SYSFS is not set
+# CONFIG_GOOGLE_FIRMWARE is not set
+
+#
+# EFI (Extensible Firmware Interface) Support
+#
+# CONFIG_EFI_VARS is not set
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_RUNTIME_MAP=y
+# CONFIG_EFI_FAKE_MEMMAP is not set
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_TEST is not set
+CONFIG_UEFI_CPER=y
+
+#
+# File systems
+#
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_FS_IOMAP=y
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_WARN is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
+CONFIG_NILFS2_FS=m
+# CONFIG_F2FS_FS is not set
+# CONFIG_FS_DAX is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+# CONFIG_FS_ENCRYPTION is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_QUOTACTL_COMPAT=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=y
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_KERNFS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_EFIVAR_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ORANGEFS_FS is not set
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+# CONFIG_ECRYPT_FS_MESSAGING is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_HFSPLUS_FS_POSIX_ACL=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_ATIME_SUPPORT is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_FILE_CACHE is not set
+CONFIG_SQUASHFS_FILE_DIRECT=y
+# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+# CONFIG_SQUASHFS_LZ4 is not set
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_QNX6FS_FS=m
+# CONFIG_QNX6FS_DEBUG is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_PSTORE=y
+CONFIG_PSTORE_ZLIB_COMPRESS=y
+# CONFIG_PSTORE_LZO_COMPRESS is not set
+# CONFIG_PSTORE_LZ4_COMPRESS is not set
+# CONFIG_PSTORE_CONSOLE is not set
+# CONFIG_PSTORE_PMSG is not set
+# CONFIG_PSTORE_FTRACE is not set
+# CONFIG_PSTORE_RAM is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
+CONFIG_ORE=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V2=m
+CONFIG_NFS_V3=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+# CONFIG_NFS_SWAP is not set
+CONFIG_NFS_V4_1=y
+# CONFIG_NFS_V4_2 is not set
+CONFIG_PNFS_FILE_LAYOUT=m
+CONFIG_PNFS_BLOCK=m
+CONFIG_PNFS_OBJLAYOUT=m
+CONFIG_PNFS_FLEXFILE_LAYOUT=m
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
+# CONFIG_NFS_V4_1_MIGRATION is not set
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFS_USE_LEGACY_DNS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+# CONFIG_NFSD_BLOCKLAYOUT is not set
+# CONFIG_NFSD_SCSILAYOUT is not set
+# CONFIG_NFSD_FLEXFILELAYOUT is not set
+# CONFIG_NFSD_V4_SECURITY_LABEL is not set
+# CONFIG_NFSD_FAULT_INJECTION is not set
+CONFIG_GRACE_PERIOD=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BACKCHANNEL=y
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_SUNRPC_DEBUG is not set
+CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_ACL=y
+CONFIG_CIFS_DEBUG=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_DFS_UPCALL=y
+# CONFIG_CIFS_SMB2 is not set
+# CONFIG_CIFS_FSCACHE is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+# CONFIG_9P_FSCACHE is not set
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_9P_FS_SECURITY=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+
+#
+# printk and dmesg options
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_SPLIT is not set
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_PAGE_OWNER is not set
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_STACK_VALIDATION is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DEBUG_PAGE_REF is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_HAVE_ARCH_KMEMCHECK=y
+CONFIG_HAVE_ARCH_KASAN=y
+# CONFIG_KASAN is not set
+CONFIG_ARCH_HAS_KCOV=y
+# CONFIG_KCOV is not set
+CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR=y
+# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_INFO=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+CONFIG_TIMER_STATS=y
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+
+#
+# RCU Debugging
+#
+# CONFIG_PROVE_RCU is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_FENTRY=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+# CONFIG_HWLAT_TRACER is not set
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_TRACER_SNAPSHOT=y
+CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KPROBE_EVENT=y
+# CONFIG_UPROBE_EVENT is not set
+CONFIG_BPF_EVENTS=y
+CONFIG_PROBE_EVENTS=y
+CONFIG_DYNAMIC_FTRACE=y
+CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+CONFIG_MMIOTRACE=y
+# CONFIG_HIST_TRIGGERS is not set
+# CONFIG_MMIOTRACE_TEST is not set
+# CONFIG_TRACEPOINT_BENCHMARK is not set
+CONFIG_RING_BUFFER_BENCHMARK=m
+# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+# CONFIG_TRACE_ENUM_MAP_FILE is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_RBTREE_TEST is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_UUID is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
+# CONFIG_KGDB_KDB is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_UBSAN is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_IO_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
+# CONFIG_EARLY_PRINTK_EFI is not set
+# CONFIG_X86_PTDUMP_CORE is not set
+# CONFIG_X86_PTDUMP is not set
+# CONFIG_EFI_PGT_DUMP is not set
+CONFIG_DEBUG_RODATA_TEST=y
+# CONFIG_DEBUG_WX is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
+CONFIG_DEBUG_NX_TEST=m
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DEBUG_TLBFLUSH is not set
+# CONFIG_IOMMU_STRESS is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
+# CONFIG_X86_DECODER_SELFTEST is not set
+CONFIG_IO_DELAY_TYPE_0X80=0
+CONFIG_IO_DELAY_TYPE_0XED=1
+CONFIG_IO_DELAY_TYPE_UDELAY=2
+CONFIG_IO_DELAY_TYPE_NONE=3
+CONFIG_IO_DELAY_0X80=y
+# CONFIG_IO_DELAY_0XED is not set
+# CONFIG_IO_DELAY_UDELAY is not set
+# CONFIG_IO_DELAY_NONE is not set
+CONFIG_DEFAULT_IO_DELAY_TYPE=0
+CONFIG_DEBUG_BOOT_PARAMS=y
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
+# CONFIG_DEBUG_ENTRY is not set
+# CONFIG_DEBUG_NMI_SELFTEST is not set
+CONFIG_X86_DEBUG_FPU=y
+# CONFIG_PUNIT_ATOM_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_TRUSTED_KEYS is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65535
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY is not set
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_SECURITY_APPARMOR is not set
+# CONFIG_SECURITY_LOADPIN is not set
+# CONFIG_SECURITY_YAMA is not set
+CONFIG_INTEGRITY=y
+# CONFIG_INTEGRITY_SIGNATURE is not set
+CONFIG_INTEGRITY_AUDIT=y
+CONFIG_IMA=y
+CONFIG_IMA_MEASURE_PCR_IDX=10
+CONFIG_IMA_LSM_RULES=y
+# CONFIG_IMA_TEMPLATE is not set
+CONFIG_IMA_NG_TEMPLATE=y
+# CONFIG_IMA_SIG_TEMPLATE is not set
+CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
+CONFIG_IMA_DEFAULT_HASH_SHA1=y
+# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
+# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
+# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
+CONFIG_IMA_DEFAULT_HASH="sha1"
+# CONFIG_IMA_WRITE_POLICY is not set
+# CONFIG_IMA_READ_POLICY is not set
+# CONFIG_IMA_APPRAISE is not set
+# CONFIG_EVM is not set
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=m
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_AKCIPHER=y
+CONFIG_CRYPTO_KPP2=y
+CONFIG_CRYPTO_RSA=y
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_ECDH is not set
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_USER is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_NULL2=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_MCRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_ECHAINIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+# CONFIG_CRYPTO_KEYWRAP is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_CMAC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32C_INTEL=m
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRC32_PCLMUL is not set
+CONFIG_CRYPTO_CRCT10DIF=y
+# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
+CONFIG_CRYPTO_GHASH=m
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_POLY1305_X86_64 is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA1_SSSE3 is not set
+# CONFIG_CRYPTO_SHA256_SSSE3 is not set
+# CONFIG_CRYPTO_SHA512_SSSE3 is not set
+# CONFIG_CRYPTO_SHA1_MB is not set
+# CONFIG_CRYPTO_SHA256_MB is not set
+# CONFIG_CRYPTO_SHA512_MB is not set
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA3 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_BLOWFISH_COMMON=m
+# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
+# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
+# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
+CONFIG_CRYPTO_CAST_COMMON=m
+CONFIG_CRYPTO_CAST5=m
+# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
+CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SALSA20_X86_64 is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
+# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
+# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
+# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
+# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_DRBG_MENU=m
+CONFIG_CRYPTO_DRBG_HMAC=y
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+CONFIG_CRYPTO_DRBG=m
+CONFIG_CRYPTO_JITTERENTROPY=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
+# CONFIG_CRYPTO_DEV_QAT_C62X is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
+# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
+# CONFIG_CRYPTO_DEV_CHELSIO is not set
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+# CONFIG_PKCS7_TEST_KEY is not set
+# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
+
+#
+# Certificates for signature checking
+#
+CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_SYSTEM_TRUSTED_KEYS=""
+# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
+# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
+CONFIG_HAVE_KVM_IRQFD=y
+CONFIG_HAVE_KVM_IRQ_ROUTING=y
+CONFIG_HAVE_KVM_EVENTFD=y
+CONFIG_KVM_MMIO=y
+CONFIG_KVM_ASYNC_PF=y
+CONFIG_HAVE_KVM_MSI=y
+CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
+CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_KVM_COMPAT=y
+CONFIG_HAVE_KVM_IRQ_BYPASS=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_MMU_AUDIT=y
+CONFIG_KVM_DEVICE_ASSIGNMENT=y
+CONFIG_VHOST_NET=m
+# CONFIG_VHOST_SCSI is not set
+CONFIG_VHOST=m
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_RAID6_PQ=m
+CONFIG_BITREVERSE=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC32_SELFTEST is not set
+CONFIG_CRC32_SLICEBY8=y
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SARWATE is not set
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+# CONFIG_CRC8 is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_BTREE=y
+CONFIG_INTERVAL_TREE=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_CPUMASK_OFFSTACK=y
+CONFIG_CPU_RMAP=y
+CONFIG_DQL=y
+CONFIG_GLOB=y
+# CONFIG_GLOB_SELFTEST is not set
+CONFIG_NLATTR=y
+CONFIG_CLZ_TAB=y
+CONFIG_CORDIC=m
+# CONFIG_DDR is not set
+CONFIG_IRQ_POLL=y
+CONFIG_MPILIB=y
+CONFIG_OID_REGISTRY=y
+CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SG_POOL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_PMEM_API=y
+CONFIG_ARCH_HAS_MMIO_FLUSH=y
+CONFIG_SBITMAP=y
diff --git a/config.d/system/locale.gen b/config.d/system/locale.gen
new file mode 100644
index 0000000..614bba4
--- /dev/null
+++ b/config.d/system/locale.gen
@@ -0,0 +1,488 @@
+# /etc/locale.gen: list all of the locales you want to have on your system.
+# See the locale.gen(5) man page for more details.
+#
+# The format of each line:
+# <locale name> <charset>
+#
+# Where <locale name> starts with a name as found in /usr/share/i18n/locales/.
+# It must be unique in the file as it is used as the key to locale variables.
+# For non-default encodings, the <charset> is typically appended.
+#
+# Where <charset> is a charset located in /usr/share/i18n/charmaps/ (sans any
+# suffix like ".gz").
+#
+# All blank lines and lines starting with # are ignored.
+#
+# For the default list of supported combinations, see the file:
+# /usr/share/i18n/SUPPORTED
+#
+# Whenever glibc is emerged, the locales listed here will be automatically
+# rebuilt for you.  After updating this file, you can simply run `locale-gen`
+# yourself instead of re-emerging glibc.
+#aa_DJ.UTF-8 UTF-8  
+#aa_DJ ISO-8859-1  
+#aa_ER UTF-8  
+#aa_ER@saaho UTF-8  
+#aa_ET UTF-8  
+#af_ZA.UTF-8 UTF-8  
+#af_ZA ISO-8859-1  
+#ak_GH UTF-8  
+#am_ET UTF-8  
+#an_ES.UTF-8 UTF-8  
+#an_ES ISO-8859-15  
+#anp_IN UTF-8  
+#ar_AE.UTF-8 UTF-8  
+#ar_AE ISO-8859-6  
+#ar_BH.UTF-8 UTF-8  
+#ar_BH ISO-8859-6  
+#ar_DZ.UTF-8 UTF-8  
+#ar_DZ ISO-8859-6  
+#ar_EG.UTF-8 UTF-8  
+#ar_EG ISO-8859-6  
+#ar_IN UTF-8  
+#ar_IQ.UTF-8 UTF-8  
+#ar_IQ ISO-8859-6  
+#ar_JO.UTF-8 UTF-8  
+#ar_JO ISO-8859-6  
+#ar_KW.UTF-8 UTF-8  
+#ar_KW ISO-8859-6  
+#ar_LB.UTF-8 UTF-8  
+#ar_LB ISO-8859-6  
+#ar_LY.UTF-8 UTF-8  
+#ar_LY ISO-8859-6  
+#ar_MA.UTF-8 UTF-8  
+#ar_MA ISO-8859-6  
+#ar_OM.UTF-8 UTF-8  
+#ar_OM ISO-8859-6  
+#ar_QA.UTF-8 UTF-8  
+#ar_QA ISO-8859-6  
+#ar_SA.UTF-8 UTF-8  
+#ar_SA ISO-8859-6  
+#ar_SD.UTF-8 UTF-8  
+#ar_SD ISO-8859-6  
+#ar_SS UTF-8  
+#ar_SY.UTF-8 UTF-8  
+#ar_SY ISO-8859-6  
+#ar_TN.UTF-8 UTF-8  
+#ar_TN ISO-8859-6  
+#ar_YE.UTF-8 UTF-8  
+#ar_YE ISO-8859-6  
+#ayc_PE UTF-8  
+#az_AZ UTF-8  
+#as_IN UTF-8  
+#ast_ES.UTF-8 UTF-8  
+#ast_ES ISO-8859-15  
+#be_BY.UTF-8 UTF-8  
+#be_BY CP1251  
+#be_BY@latin UTF-8  
+#bem_ZM UTF-8  
+#ber_DZ UTF-8  
+#ber_MA UTF-8  
+#bg_BG.UTF-8 UTF-8  
+#bg_BG CP1251  
+#bhb_IN.UTF-8 UTF-8  
+#bho_IN UTF-8  
+#bn_BD UTF-8  
+#bn_IN UTF-8  
+#bo_CN UTF-8  
+#bo_IN UTF-8  
+#br_FR.UTF-8 UTF-8  
+#br_FR ISO-8859-1  
+#br_FR@euro ISO-8859-15  
+#brx_IN UTF-8  
+#bs_BA.UTF-8 UTF-8  
+#bs_BA ISO-8859-2  
+#byn_ER UTF-8  
+#ca_AD.UTF-8 UTF-8  
+#ca_AD ISO-8859-15  
+#ca_ES.UTF-8 UTF-8  
+#ca_ES ISO-8859-1  
+#ca_ES@euro ISO-8859-15  
+#ca_FR.UTF-8 UTF-8  
+#ca_FR ISO-8859-15  
+#ca_IT.UTF-8 UTF-8  
+#ca_IT ISO-8859-15  
+#ce_RU UTF-8  
+#chr_US UTF-8  
+#cmn_TW UTF-8  
+#crh_UA UTF-8  
+#cs_CZ.UTF-8 UTF-8  
+#cs_CZ ISO-8859-2  
+#csb_PL UTF-8  
+#cv_RU UTF-8  
+#cy_GB.UTF-8 UTF-8  
+#cy_GB ISO-8859-14  
+#da_DK.UTF-8 UTF-8  
+#da_DK ISO-8859-1  
+#de_AT.UTF-8 UTF-8  
+#de_AT ISO-8859-1  
+#de_AT@euro ISO-8859-15  
+#de_BE.UTF-8 UTF-8  
+#de_BE ISO-8859-1  
+#de_BE@euro ISO-8859-15  
+#de_CH.UTF-8 UTF-8  
+#de_CH ISO-8859-1  
+#de_DE.UTF-8 UTF-8  
+#de_DE ISO-8859-1  
+#de_DE@euro ISO-8859-15  
+#de_IT.UTF-8 UTF-8  
+#de_IT ISO-8859-1  
+#de_LI.UTF-8 UTF-8  
+#de_LU.UTF-8 UTF-8  
+#de_LU ISO-8859-1  
+#de_LU@euro ISO-8859-15  
+#doi_IN UTF-8  
+#dv_MV UTF-8  
+#dz_BT UTF-8  
+#el_GR.UTF-8 UTF-8  
+#el_GR ISO-8859-7  
+#el_CY.UTF-8 UTF-8  
+#el_CY ISO-8859-7  
+#en_AG UTF-8  
+#en_AU.UTF-8 UTF-8  
+#en_AU ISO-8859-1  
+#en_BW.UTF-8 UTF-8  
+#en_BW ISO-8859-1  
+#en_CA.UTF-8 UTF-8  
+#en_CA ISO-8859-1  
+#en_DK.UTF-8 UTF-8  
+#en_DK ISO-8859-1  
+#en_GB.UTF-8 UTF-8  
+#en_GB ISO-8859-1  
+#en_HK.UTF-8 UTF-8  
+#en_HK ISO-8859-1  
+#en_IE.UTF-8 UTF-8  
+#en_IE ISO-8859-1  
+#en_IE@euro ISO-8859-15  
+#en_IL UTF-8  
+#en_IN UTF-8  
+#en_NG UTF-8  
+#en_NZ.UTF-8 UTF-8  
+#en_NZ ISO-8859-1  
+#en_PH.UTF-8 UTF-8  
+#en_PH ISO-8859-1  
+#en_SG.UTF-8 UTF-8  
+#en_SG ISO-8859-1  
+en_US.UTF-8 UTF-8  
+#en_US ISO-8859-1  
+#en_ZA.UTF-8 UTF-8  
+#en_ZA ISO-8859-1  
+#en_ZM UTF-8  
+#en_ZW.UTF-8 UTF-8  
+#en_ZW ISO-8859-1  
+#eo UTF-8  
+#es_AR.UTF-8 UTF-8  
+#es_AR ISO-8859-1  
+#es_BO.UTF-8 UTF-8  
+#es_BO ISO-8859-1  
+#es_CL.UTF-8 UTF-8  
+#es_CL ISO-8859-1  
+#es_CO.UTF-8 UTF-8  
+#es_CO ISO-8859-1  
+#es_CR.UTF-8 UTF-8  
+#es_CR ISO-8859-1  
+#es_CU UTF-8  
+#es_DO.UTF-8 UTF-8  
+#es_DO ISO-8859-1  
+#es_EC.UTF-8 UTF-8  
+#es_EC ISO-8859-1  
+#es_ES.UTF-8 UTF-8  
+#es_ES ISO-8859-1  
+#es_ES@euro ISO-8859-15  
+#es_GT.UTF-8 UTF-8  
+#es_GT ISO-8859-1  
+#es_HN.UTF-8 UTF-8  
+#es_HN ISO-8859-1  
+#es_MX.UTF-8 UTF-8  
+#es_MX ISO-8859-1  
+#es_NI.UTF-8 UTF-8  
+#es_NI ISO-8859-1  
+#es_PA.UTF-8 UTF-8  
+#es_PA ISO-8859-1  
+#es_PE.UTF-8 UTF-8  
+#es_PE ISO-8859-1  
+#es_PR.UTF-8 UTF-8  
+#es_PR ISO-8859-1  
+#es_PY.UTF-8 UTF-8  
+#es_PY ISO-8859-1  
+#es_SV.UTF-8 UTF-8  
+#es_SV ISO-8859-1  
+#es_US.UTF-8 UTF-8  
+#es_US ISO-8859-1  
+#es_UY.UTF-8 UTF-8  
+#es_UY ISO-8859-1  
+#es_VE.UTF-8 UTF-8  
+#es_VE ISO-8859-1  
+#et_EE.UTF-8 UTF-8  
+#et_EE ISO-8859-1  
+#et_EE.ISO-8859-15 ISO-8859-15  
+#eu_ES.UTF-8 UTF-8  
+#eu_ES ISO-8859-1  
+#eu_ES@euro ISO-8859-15  
+#fa_IR UTF-8  
+#ff_SN UTF-8  
+#fi_FI.UTF-8 UTF-8  
+#fi_FI ISO-8859-1  
+#fi_FI@euro ISO-8859-15  
+#fil_PH UTF-8  
+#fo_FO.UTF-8 UTF-8  
+#fo_FO ISO-8859-1  
+#fr_BE.UTF-8 UTF-8  
+#fr_BE ISO-8859-1  
+#fr_BE@euro ISO-8859-15  
+#fr_CA.UTF-8 UTF-8  
+#fr_CA ISO-8859-1  
+#fr_CH.UTF-8 UTF-8  
+#fr_CH ISO-8859-1  
+#fr_FR.UTF-8 UTF-8  
+#fr_FR ISO-8859-1  
+#fr_FR@euro ISO-8859-15  
+#fr_LU.UTF-8 UTF-8  
+#fr_LU ISO-8859-1  
+#fr_LU@euro ISO-8859-15  
+#fur_IT UTF-8  
+#fy_NL UTF-8  
+#fy_DE UTF-8  
+#ga_IE.UTF-8 UTF-8  
+#ga_IE ISO-8859-1  
+#ga_IE@euro ISO-8859-15  
+#gd_GB.UTF-8 UTF-8  
+#gd_GB ISO-8859-15  
+#gez_ER UTF-8  
+#gez_ER@abegede UTF-8  
+#gez_ET UTF-8  
+#gez_ET@abegede UTF-8  
+#gl_ES.UTF-8 UTF-8  
+#gl_ES ISO-8859-1  
+#gl_ES@euro ISO-8859-15  
+#gu_IN UTF-8  
+#gv_GB.UTF-8 UTF-8  
+#gv_GB ISO-8859-1  
+#ha_NG UTF-8  
+#hak_TW UTF-8  
+#he_IL.UTF-8 UTF-8  
+#he_IL ISO-8859-8  
+#hi_IN UTF-8  
+#hne_IN UTF-8  
+#hr_HR.UTF-8 UTF-8  
+#hr_HR ISO-8859-2  
+#hsb_DE ISO-8859-2  
+#hsb_DE.UTF-8 UTF-8  
+#ht_HT UTF-8  
+#hu_HU.UTF-8 UTF-8  
+#hu_HU ISO-8859-2  
+#hy_AM UTF-8  
+#hy_AM.ARMSCII-8 ARMSCII-8  
+#ia_FR UTF-8  
+#id_ID.UTF-8 UTF-8  
+#id_ID ISO-8859-1  
+#ig_NG UTF-8  
+#ik_CA UTF-8  
+#is_IS.UTF-8 UTF-8  
+#is_IS ISO-8859-1  
+#it_CH.UTF-8 UTF-8  
+#it_CH ISO-8859-1  
+#it_IT.UTF-8 UTF-8  
+#it_IT ISO-8859-1  
+#it_IT@euro ISO-8859-15  
+#iu_CA UTF-8  
+#ja_JP.EUC-JP EUC-JP  
+#ja_JP.UTF-8 UTF-8  
+#ka_GE.UTF-8 UTF-8  
+#ka_GE GEORGIAN-PS  
+#kk_KZ.UTF-8 UTF-8  
+#kk_KZ PT154  
+#kl_GL.UTF-8 UTF-8  
+#kl_GL ISO-8859-1  
+#km_KH UTF-8  
+#kn_IN UTF-8  
+#ko_KR.EUC-KR EUC-KR  
+#ko_KR.UTF-8 UTF-8  
+#kok_IN UTF-8  
+#ks_IN UTF-8  
+#ks_IN@devanagari UTF-8  
+#ku_TR.UTF-8 UTF-8  
+#ku_TR ISO-8859-9  
+#kw_GB.UTF-8 UTF-8  
+#kw_GB ISO-8859-1  
+#ky_KG UTF-8  
+#lb_LU UTF-8  
+#lg_UG.UTF-8 UTF-8  
+#lg_UG ISO-8859-10  
+#li_BE UTF-8  
+#li_NL UTF-8  
+#lij_IT UTF-8  
+#ln_CD UTF-8  
+#lo_LA UTF-8  
+#lt_LT.UTF-8 UTF-8  
+#lt_LT ISO-8859-13  
+#lv_LV.UTF-8 UTF-8  
+#lv_LV ISO-8859-13  
+#lzh_TW UTF-8  
+#mag_IN UTF-8  
+#mai_IN UTF-8  
+#mg_MG.UTF-8 UTF-8  
+#mg_MG ISO-8859-15  
+#mhr_RU UTF-8  
+#mi_NZ.UTF-8 UTF-8  
+#mi_NZ ISO-8859-13  
+#mk_MK.UTF-8 UTF-8  
+#mk_MK ISO-8859-5  
+#ml_IN UTF-8  
+#mn_MN UTF-8  
+#mni_IN UTF-8  
+#mr_IN UTF-8  
+#ms_MY.UTF-8 UTF-8  
+#ms_MY ISO-8859-1  
+#mt_MT.UTF-8 UTF-8  
+#mt_MT ISO-8859-3  
+#my_MM UTF-8  
+#nan_TW UTF-8  
+#nan_TW@latin UTF-8  
+#nb_NO.UTF-8 UTF-8  
+#nb_NO ISO-8859-1  
+#nds_DE UTF-8  
+#nds_NL UTF-8  
+#ne_NP UTF-8  
+#nhn_MX UTF-8  
+#niu_NU UTF-8  
+#niu_NZ UTF-8  
+#nl_AW UTF-8  
+#nl_BE.UTF-8 UTF-8  
+#nl_BE ISO-8859-1  
+#nl_BE@euro ISO-8859-15  
+#nl_NL.UTF-8 UTF-8  
+#nl_NL ISO-8859-1  
+#nl_NL@euro ISO-8859-15  
+#nn_NO.UTF-8 UTF-8  
+#nn_NO ISO-8859-1  
+#nr_ZA UTF-8  
+#nso_ZA UTF-8  
+#oc_FR.UTF-8 UTF-8  
+#oc_FR ISO-8859-1  
+#om_ET UTF-8  
+#om_KE.UTF-8 UTF-8  
+#om_KE ISO-8859-1  
+#or_IN UTF-8  
+#os_RU UTF-8  
+#pa_IN UTF-8  
+#pa_PK UTF-8  
+#pap_AW UTF-8  
+#pap_CW UTF-8  
+#pl_PL.UTF-8 UTF-8  
+#pl_PL ISO-8859-2  
+#ps_AF UTF-8  
+#pt_BR.UTF-8 UTF-8  
+#pt_BR ISO-8859-1  
+#pt_PT.UTF-8 UTF-8  
+#pt_PT ISO-8859-1  
+#pt_PT@euro ISO-8859-15  
+#quz_PE UTF-8  
+#raj_IN UTF-8  
+#ro_RO.UTF-8 UTF-8  
+#ro_RO ISO-8859-2  
+#ru_RU.KOI8-R KOI8-R  
+#ru_RU.UTF-8 UTF-8  
+#ru_RU ISO-8859-5  
+#ru_UA.UTF-8 UTF-8  
+#ru_UA KOI8-U  
+#rw_RW UTF-8  
+#sa_IN UTF-8  
+#sat_IN UTF-8  
+#sc_IT UTF-8  
+#sd_IN UTF-8  
+#sd_IN@devanagari UTF-8  
+#se_NO UTF-8  
+#sgs_LT UTF-8  
+#shs_CA UTF-8  
+#si_LK UTF-8  
+#sid_ET UTF-8  
+#sk_SK.UTF-8 UTF-8  
+#sk_SK ISO-8859-2  
+#sl_SI.UTF-8 UTF-8  
+#sl_SI ISO-8859-2  
+#so_DJ.UTF-8 UTF-8  
+#so_DJ ISO-8859-1  
+#so_ET UTF-8  
+#so_KE.UTF-8 UTF-8  
+#so_KE ISO-8859-1  
+#so_SO.UTF-8 UTF-8  
+#so_SO ISO-8859-1  
+#sq_AL.UTF-8 UTF-8  
+#sq_AL ISO-8859-1  
+#sq_MK UTF-8  
+#sr_ME UTF-8  
+#sr_RS UTF-8  
+#sr_RS@latin UTF-8  
+#ss_ZA UTF-8  
+#st_ZA.UTF-8 UTF-8  
+#st_ZA ISO-8859-1  
+#sv_FI.UTF-8 UTF-8  
+#sv_FI ISO-8859-1  
+#sv_FI@euro ISO-8859-15  
+#sv_SE.UTF-8 UTF-8  
+#sv_SE ISO-8859-1  
+#sw_KE UTF-8  
+#sw_TZ UTF-8  
+#szl_PL UTF-8  
+#ta_IN UTF-8  
+#ta_LK UTF-8  
+#tcy_IN.UTF-8 UTF-8  
+#te_IN UTF-8  
+#tg_TJ.UTF-8 UTF-8  
+#tg_TJ KOI8-T  
+#th_TH.UTF-8 UTF-8  
+#th_TH TIS-620  
+#the_NP UTF-8  
+#ti_ER UTF-8  
+#ti_ET UTF-8  
+#tig_ER UTF-8  
+#tk_TM UTF-8  
+#tl_PH.UTF-8 UTF-8  
+#tl_PH ISO-8859-1  
+#tn_ZA UTF-8  
+#tr_CY.UTF-8 UTF-8  
+#tr_CY ISO-8859-9  
+#tr_TR.UTF-8 UTF-8  
+#tr_TR ISO-8859-9  
+#ts_ZA UTF-8  
+#tt_RU UTF-8  
+#tt_RU@iqtelif UTF-8  
+#ug_CN UTF-8  
+#uk_UA.UTF-8 UTF-8  
+#uk_UA KOI8-U  
+#unm_US UTF-8  
+#ur_IN UTF-8  
+#ur_PK UTF-8  
+#uz_UZ.UTF-8 UTF-8  
+#uz_UZ ISO-8859-1  
+#uz_UZ@cyrillic UTF-8  
+#ve_ZA UTF-8  
+#vi_VN UTF-8  
+#wa_BE ISO-8859-1  
+#wa_BE@euro ISO-8859-15  
+#wa_BE.UTF-8 UTF-8  
+#wae_CH UTF-8  
+#wal_ET UTF-8  
+#wo_SN UTF-8  
+#xh_ZA.UTF-8 UTF-8  
+#xh_ZA ISO-8859-1  
+#yi_US.UTF-8 UTF-8  
+#yi_US CP1255  
+#yo_NG UTF-8  
+#yue_HK UTF-8  
+#zh_CN.GB18030 GB18030  
+#zh_CN.GBK GBK  
+#zh_CN.UTF-8 UTF-8  
+#zh_CN GB2312  
+#zh_HK.UTF-8 UTF-8  
+#zh_HK BIG5-HKSCS  
+#zh_SG.UTF-8 UTF-8  
+#zh_SG.GBK GBK  
+#zh_SG GB2312  
+#zh_TW.EUC-TW EUC-TW  
+#zh_TW.UTF-8 UTF-8  
+#zh_TW BIG5  
+#zu_ZA.UTF-8 UTF-8  
+#zu_ZA ISO-8859-1  
+
diff --git a/config.d/system/net b/config.d/system/net
new file mode 100644
index 0000000..998d357
--- /dev/null
+++ b/config.d/system/net
@@ -0,0 +1,5 @@
+# Please note that for now, only ethernet is supported by the controller, but more options will be added on future releases
+# If you don't change net-int, then it will be set automatically by the controller
+# 
+config_net-int=("dhcp")
+# modules_net-int=(" ")
diff --git a/config.d/system/portage/make.conf b/config.d/system/portage/make.conf
new file mode 100644
index 0000000..7df53e1
--- /dev/null
+++ b/config.d/system/portage/make.conf
@@ -0,0 +1,24 @@
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+CFLAGS="-O2 -pipe"
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE and USE_EXPAND flags that were used for
+# buidling in addition to what is provided by the profile.
+USE="bindist"
+CPU_FLAGS_X86="mmx sse sse2"
+PORTDIR="/usr/portage"
+DISTDIR="${PORTDIR}/distfiles"
+PKGDIR="${PORTDIR}/packages"
+# MAKE OPTS
+MAKEOPTS="-j8"
+# EMERGE DEFAULT OPTS
+EMERGE_DEFAULT_OPTS="--load-average 8"
+# MIRRORS
+#GENTOO_MIRRORS="http://ftp.ntua.gr/pub/linux/gentoo/ ftp://ftp.ntua.gr/pub/linux/gentoo/ ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://mirrors.soeasyto.com/distfiles.gentoo.org/ 
+#http://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ ftp://gentoo.imj.fr/pub/gentoo/ ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/
+#gentoo http://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ http://ftp.halifax.rwth-aachen.de/gentoo/"
diff --git a/config.d/system/portage/makeconf.backup b/config.d/system/portage/makeconf.backup
new file mode 100644
index 0000000..f65c902
--- /dev/null
+++ b/config.d/system/portage/makeconf.backup
@@ -0,0 +1,16 @@
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+CFLAGS="-O2 -pipe"
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE and USE_EXPAND flags that were used for
+# buidling in addition to what is provided by the profile.
+USE="bindist"
+CPU_FLAGS_X86="mmx sse sse2"
+PORTDIR="/usr/portage"
+DISTDIR="${PORTDIR}/distfiles"
+PKGDIR="${PORTDIR}/packages"
diff --git a/config.d/system/portage/package.use/sysbuild b/config.d/system/portage/package.use/sysbuild
new file mode 100644
index 0000000..f252342
--- /dev/null
+++ b/config.d/system/portage/package.use/sysbuild
@@ -0,0 +1,55 @@
+sys-apps/busybox static
+net-misc/rsync xattr static acl iconv
+app-arch/bzip2 static-libs
+sys-fs/e2fsprogs fuse static-libs
+sys-libs/e2fsprogs-libs static-libs
+sys-libs/zlib static-libs minizip
+dev-libs/lzo static-libs
+sys-fs/squashfs-tools lz4 lzma xattr xz
+sys-fs/squashfuse lz4 lzma lzo zlib
+sys-fs/btrfs-progs convert static static-libs
+sys-apps/openrc ncurses netifrc static-libs unicode
+sys-fs/dosfstools udev
+
+# required by net-misc/networkmanager-1.4.4-r1::gentoo[wifi]
+# required by net-misc/networkmanager (argument)
+>=net-wireless/wpa_supplicant-2.6 dbus
+# required by sys-auth/polkit-0.113::gentoo[-systemd]
+# required by net-misc/networkmanager-1.4.4-r1::gentoo
+# required by net-misc/networkmanager (argument)
+>=sys-auth/consolekit-1.1.0-r1 policykit
+# required by sys-auth/consolekit-1.1.0-r1::gentoo
+# required by sys-auth/polkit-0.113::gentoo[-systemd]
+# required by net-misc/networkmanager-1.4.4-r1::gentoo
+# required by net-misc/networkmanager (argument)
+>=dev-libs/glib-2.50.3-r1 dbus
+
+# required by net-misc/rsync-3.1.2::gentoo[xattr,static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=sys-apps/attr-2.4.47-r2 static-libs
+# required by net-misc/rsync-3.1.2::gentoo[static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=dev-libs/popt-1.16-r2 static-libs
+# required by virtual/acl-0-r2::gentoo
+# required by sys-apps/sed-4.2.2::gentoo
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=sys-apps/acl-2.2.52-r1 static-libs
+# required by net-misc/rsync-3.1.2::gentoo[acl,static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=virtual/acl-0-r2 static-libs
+
+# required by sys-fs/btrfs-progs-4.10.2::gentoo[static]
+# required by sys-fs/btrfs-progs (argument)
+>=sys-apps/util-linux-2.28.2 static-libs
\ No newline at end of file
diff --git a/config.d/system/portage/package.use/sysbuild.backup b/config.d/system/portage/package.use/sysbuild.backup
new file mode 100644
index 0000000..f252342
--- /dev/null
+++ b/config.d/system/portage/package.use/sysbuild.backup
@@ -0,0 +1,55 @@
+sys-apps/busybox static
+net-misc/rsync xattr static acl iconv
+app-arch/bzip2 static-libs
+sys-fs/e2fsprogs fuse static-libs
+sys-libs/e2fsprogs-libs static-libs
+sys-libs/zlib static-libs minizip
+dev-libs/lzo static-libs
+sys-fs/squashfs-tools lz4 lzma xattr xz
+sys-fs/squashfuse lz4 lzma lzo zlib
+sys-fs/btrfs-progs convert static static-libs
+sys-apps/openrc ncurses netifrc static-libs unicode
+sys-fs/dosfstools udev
+
+# required by net-misc/networkmanager-1.4.4-r1::gentoo[wifi]
+# required by net-misc/networkmanager (argument)
+>=net-wireless/wpa_supplicant-2.6 dbus
+# required by sys-auth/polkit-0.113::gentoo[-systemd]
+# required by net-misc/networkmanager-1.4.4-r1::gentoo
+# required by net-misc/networkmanager (argument)
+>=sys-auth/consolekit-1.1.0-r1 policykit
+# required by sys-auth/consolekit-1.1.0-r1::gentoo
+# required by sys-auth/polkit-0.113::gentoo[-systemd]
+# required by net-misc/networkmanager-1.4.4-r1::gentoo
+# required by net-misc/networkmanager (argument)
+>=dev-libs/glib-2.50.3-r1 dbus
+
+# required by net-misc/rsync-3.1.2::gentoo[xattr,static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=sys-apps/attr-2.4.47-r2 static-libs
+# required by net-misc/rsync-3.1.2::gentoo[static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=dev-libs/popt-1.16-r2 static-libs
+# required by virtual/acl-0-r2::gentoo
+# required by sys-apps/sed-4.2.2::gentoo
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=sys-apps/acl-2.2.52-r1 static-libs
+# required by net-misc/rsync-3.1.2::gentoo[acl,static]
+# required by sys-apps/portage-2.3.5::gentoo[-build]
+# required by virtual/package-manager-0::gentoo
+# required by @system
+# required by @world (argument)
+>=virtual/acl-0-r2 static-libs
+
+# required by sys-fs/btrfs-progs-4.10.2::gentoo[static]
+# required by sys-fs/btrfs-progs (argument)
+>=sys-apps/util-linux-2.28.2 static-libs
\ No newline at end of file
diff --git a/config.d/system/portage/profiles/child-gse/eapi b/config.d/system/portage/profiles/child-gse/eapi
new file mode 100644
index 0000000..7ed6ff8
--- /dev/null
+++ b/config.d/system/portage/profiles/child-gse/eapi
@@ -0,0 +1 @@
+5
diff --git a/config.d/system/portage/profiles/child-gse/parent b/config.d/system/portage/profiles/child-gse/parent
new file mode 100644
index 0000000..76d9076
--- /dev/null
+++ b/config.d/system/portage/profiles/child-gse/parent
@@ -0,0 +1,2 @@
+..
+../../../../../GSE
diff --git a/config.d/system/portage/profiles/parent-gse/eapi b/config.d/system/portage/profiles/parent-gse/eapi
new file mode 100644
index 0000000..7ed6ff8
--- /dev/null
+++ b/config.d/system/portage/profiles/parent-gse/eapi
@@ -0,0 +1 @@
+5
diff --git a/config.d/system/portage/profiles/parent-gse/make.defaults b/config.d/system/portage/profiles/parent-gse/make.defaults
new file mode 100644
index 0000000..913e023
--- /dev/null
+++ b/config.d/system/portage/profiles/parent-gse/make.defaults
@@ -0,0 +1,4 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+#
+# TBU
diff --git a/config.d/system/portage/profiles/parent-gse/package.use b/config.d/system/portage/profiles/parent-gse/package.use
new file mode 100644
index 0000000..913e023
--- /dev/null
+++ b/config.d/system/portage/profiles/parent-gse/package.use
@@ -0,0 +1,4 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+#
+# TBU
diff --git a/config.d/system/portage/profiles/parent-gse/package.use.force b/config.d/system/portage/profiles/parent-gse/package.use.force
new file mode 100644
index 0000000..913e023
--- /dev/null
+++ b/config.d/system/portage/profiles/parent-gse/package.use.force
@@ -0,0 +1,4 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+#
+# TBU
diff --git a/config.d/system/runlevels b/config.d/system/runlevels
new file mode 100644
index 0000000..637cdd7
--- /dev/null
+++ b/config.d/system/runlevels
@@ -0,0 +1,13 @@
+# Runlevel entries
+#
+# Add or remove entries from a specific runlevel
+# Please use this section with care! Misconfiguration here will make your system unbootable.
+#
+# Syntax: {daemon} {add/dell} {runlevel}
+# Example: distccd add default -> rc-update add distccd default
+#
+#
+consolefont add boot
+
+
+
diff --git a/config.d/system/ssh.pub b/config.d/system/ssh.pub
new file mode 100644
index 0000000..09fb3d5
--- /dev/null
+++ b/config.d/system/ssh.pub
@@ -0,0 +1,3 @@
+# Public ssh key
+# If you don't enable sshd and authorized_keys, this key wont do anything
+# Key must begin exactly on the next line.
diff --git a/config.d/system/sshd b/config.d/system/sshd
new file mode 100644
index 0000000..6d5361f
--- /dev/null
+++ b/config.d/system/sshd
@@ -0,0 +1,150 @@
+#	$OpenBSD: sshd_config,v 1.99 2016/07/11 03:19:44 tedu Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin no
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+#AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+PrintLastLog no
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation sandbox
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib64/misc/sftp-server
+
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+
+# disable hpn performance boosts
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
+# allow the use of the none cipher
+#NoneEnabled no
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
+
+# Allow client to pass locale environment variables #367017
+AcceptEnv LANG LC_*
diff --git a/config.d/system/system_links b/config.d/system/system_links
new file mode 100644
index 0000000..2f43104
--- /dev/null
+++ b/config.d/system/system_links
@@ -0,0 +1,24 @@
+# Symlinks, bind-mounts,  overlas and tmpfs
+# Please follow the examples to configure any symlinks you wish to create automatically
+# 
+# Symlink options: symlink {f=y/n} {dir=path} {source} {target}
+# Example 1: symlink f=n /etc/conf.d/net /user-data/local/net
+# This will be translated as: ln -s /etc/conf.d/net /user-data/local/net
+#
+# On the other hand, this: symlink f=y /user-data/custom-location /etc/conf.d/net /user-data/custom-location/net
+# is translated as: mkdir -p /user-data/custom-location && ln -s /etc/conf.d/net /user-data/custom-location/net
+#
+# Bind mount options: bindmount {f=y/n} {dir=path} {source} {target}
+# Example 2: bindmount f=y dir=/user-data/local/home/user /home/user/data /user-data/local/home/user/data
+# Same as: mkdir -p /user-data/local/home/user && /home/user/data /user-data/local/home/user/data none rw,bind 0 0
+#
+# Overlay options: overlay {lowerdir} {uperdir} {workdir}
+# Example 3: overlay /etc/conf.d /user-data/persistent/conf.d /user-data/persistent/conf.d.work
+# Same as: overlay /merged overlay noauto,lowerdir=/etc/conf.d,uperdir=/user-data/persistent/conf.d,workdir=/user-data/persistent/conf.d.work 0 0
+#
+# Tmpfs options: tmpfs {source} S
+# Example 4: tmpfs /var/logs S=64M
+# Same as tmpfs /var/logs tmpfs nodev,nosuid,noexec,nodiratime,size=64M 0 0
+#
+# 
+# Don't modify the comment lines, or if you do, keep your entries below the next line.
diff --git a/etc/gentoo.conf b/etc/gentoo.conf
new file mode 100644
index 0000000..7628650
--- /dev/null
+++ b/etc/gentoo.conf
@@ -0,0 +1,20 @@
+#!/bin/bash
+
+### Gentoo related configuration file. TBU
+#
+#
+#
+#
+#
+#
+###
+
+# Gentoo
+export GSEVER='alpha'
+export ARCH=amd64
+export DIST="http://distfiles.gentoo.org/releases/${ARCH}/autobuilds"
+export SIGNING_KEY="https://www.gentoo.org/downloads/signatures"
+
+# Catalyst
+
+export GSE_VER="GSE_${GSEVER}"
diff --git a/local/loc_req b/local/loc_req
new file mode 100644
index 0000000..f761db0
--- /dev/null
+++ b/local/loc_req
@@ -0,0 +1,37 @@
+# Runtime Dependencies
+# TBU
+
+sys-apps/busybox
+sys-apps/less
+sys-apps/which
+sys-apps/grep
+www-client/lynx
+net-misc/wget
+sys-devel/automake
+net-misc/rsync
+sys-devel/gnuconfig
+app-arch/bzip2
+app-arch/gzip
+sys-kernel/genkernel
+sys-libs/timezone-data
+sys-devel/gettext
+sys-devel/autoconf
+sys-kernel/dracut
+sys-apps/file
+sys-devel/make
+sys-libs/zlib
+dev-libs/lzo
+app-portage/mirrorselect
+app-editors/vim
+app-crypt/gnupg
+sys-apps/iproute2
+app-crypt/gnupg
+sys-process/cronie
+net-misc/openssh
+app-arch/tar
+sys-apps/sed
+sys-apps/gawk
+sys-devel/patch
+sys-block/parted
+dev-util/catalyst
+app-portage/eix
\ No newline at end of file
diff --git a/local/sinprog b/local/sinprog
new file mode 100644
index 0000000..1f92d3b
--- /dev/null
+++ b/local/sinprog
@@ -0,0 +1,8 @@
+# Don't edit this file manually. It controlls the flow of builder's process
+PARTA=0
+NEW=1
+KEY=1
+WGETST3=1
+VERIFICATION=1
+EXTRACTION=0
+PARTB=0YST=0
diff --git a/scripts/chroot_scripts/chinit.conf b/scripts/chroot_scripts/chinit.conf
new file mode 100644
index 0000000..cfecd6a
--- /dev/null
+++ b/scripts/chroot_scripts/chinit.conf
@@ -0,0 +1,24 @@
+#!/bin/bash
+
+#mapfile -t SERVERS < <($SERVERLIST)
+#export SERVERS
+export MSLIST=(10 20 30 40 50 60 70 80 90 100)
+export VERSION=TBU
+export TIMEZONE=TMZ
+export INS_PARTF="sys-apps/openrc app-crypt/gnupg app-cdr/cdrtools \
+sys-libs/timezone-data sys-kernel/linux-firmware sys-apps/pciutils sys-kernel/gentoo-sources \
+net-misc/netifrc app-admin/logrotate app-admin/sysklogd sys-process/cronie 	sys-apps/mlocate \
+sys-fs/dosfstools sys-fs/btrfs-progs sys-fs/reiserfsprogs sys-fs/e2fsprogs net-misc/dhcpcd \
+sys-boot/grub:2 sys-kernel/dracut"
+
+#INS_PARTF="${INS_PARTF} sys-kernel/genkernel app-admin/sudo app-arch/unrar \
+#app-editors/vim app-misc/screenfetch app-portage/cpuid2cpuflags app-portage/mirrorselect \
+#media-fonts/efont-unicode media-fonts/freefont media-fonts/liberation-fonts \
+#media-fonts/libertine media-fonts/noto media-fonts/oldstandard media-fonts/roboto \
+#media-fonts/sil-galatia media-fonts/symbola media-fonts/terminus-font \
+#media-fonts/ubuntu-font-family media-fonts/unifont media-libs/fontconfig net-fs/sshfs \
+#net-wireless/wpa_supplicant sys-apps/fakechroot sys-apps/fakeroot sys-apps/hwinfo \
+#sys-apps/iucode_tool sys-apps/lm_sensors sys-apps/lshw sys-boot/grub:2 sys-devel/distcc \
+#sys-fs/mtpfs sys-fs/ntfs3g sys-fs/squashfs-tools"
+
+export INS_PARTF
diff --git a/scripts/chroot_scripts/chprint_inf b/scripts/chroot_scripts/chprint_inf
new file mode 100755
index 0000000..e859e05
--- /dev/null
+++ b/scripts/chroot_scripts/chprint_inf
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# Error messages
+case $1 in
+	1)
+		echo -e "[\e[32m*\e[0m] Done";;
+	2)
+		echo -e "[\e[31m*\e[0m] FAILED";;
+	3)
+		clear
+		echo "If this message is printed while using the Maim Menu"
+		echo "That means essential files are altered or something bad is happening."
+		echo
+		echo "Please run a health-check from the ~Main Menu~ and a Version check first."
+		echo "If you see this again after the health/version check, please submit a bug report"
+		echo "and stop using the program, or data loss may occur."
+		echo
+		echo "Exiting..."
+		sleep 2
+		exit 1;;
+	4)
+		echo -e "[\e[31m*\e[0m] [\e[31mERROR\e[0m: Wrong parameters"
+		exit 1;;
+	5)
+		echo -e "[\e[31m*\e[0m] Failed getting version"
+esac
diff --git a/scripts/chroot_scripts/chroot_init b/scripts/chroot_scripts/chroot_init
new file mode 100755
index 0000000..fb904e9
--- /dev/null
+++ b/scripts/chroot_scripts/chroot_init
@@ -0,0 +1,244 @@
+#!/bin/bash
+
+LC_COLLATE="C"
+
+source /etc/profile && export PS1="( 'Part C: Preparing to bootstrap' ) $PS1"
+export CHDIR="/sinit.d"
+export PATH=${PATH}:${CHDIR}
+source "${CHDIR}/chinit.conf" || { chprint_inf 2; exit 1; }
+
+# PART C BEGINS
+if [[ "$(awk -F '=' '/WEBRSYNC/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+clear; echo "Part C: Preparing to bootstrap"
+# server_set_f "${SERVERS[@]}"
+echo "Getting latest portage snapshot"
+emerge-webrsync && chprint_inf 1 || { chprint_inf 2; exit 1; }
+env-update > /dev/null 2>&1
+chsinit_mon 1
+fi
+
+rm -f /etc/portage/make.conf
+rm -r /etc/portage/package.use/sysbuild
+cp "${CHDIR}/make.conf" /etc/portage/make.conf \
+&& cp "${CHDIR}/sysbuild" /etc/portage/package.use/sysbuild
+
+# SELECTING BASIC PROFILE
+eselect profile set 1
+
+if [[ "$(awk -F '=' '/CATALYST/{ print $2 }' < "${CHDIR}/tborigin")" == 0 ]]; then
+# Part D Begins
+if [[ "$(awk -F '=' '/REBUILD/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+clear; echo "Part D: Rebuilding system"
+env-update > /dev/null 2>&1 && source /etc/profile && export PS1="( 'Part D: Rebuilding system' ) $PS1"
+export PATH=${PATH}:${CHDIR}
+
+# emerge -ev @world or emerge -vr
+while true; do
+	echo "Do you wish to rebuild the system?"
+	echo "If catalyst built this system, simply say no"
+	read -p "Answer Yes or No: " yn
+	case $yn in
+		[yY][eE][sS]|[yY])
+			if [[ "$(awk -F '=' '/RESUMEREB/{ print $2 }' <"${CHDIR}/chsinprog")" == 1 ]]; then
+			emerge -ev @world || { chsinit_mon 6; chprint_inf 2; exit 1; }
+			else
+			emerge -rv || { chsinit_mon 8; chprint_inf 2; exit 1; }
+			fi
+			chsinit_mon 3; break;;
+		[nN][oO]|[nN])
+			echo "Exiting Rebuilding Part"
+			sleep 1
+			chsinit_mon 6; break;;
+	esac
+done
+fi
+fi
+
+# PART E BEGINS
+if [[ "$(awk -F '=' '/CONFIGURE/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+clear; echo "Part E: Configuring system"
+env-update > /dev/null 2>&1 && source /etc/profile && export PS1="( 'Part E: Configuring system' ) $PS1"
+export PATH=${PATH}:${CHDIR}
+
+# TIMEZONE CONFIGURATION
+if [[ "${TIMEZONE}" != TMZ ]]; then
+echo "${TIMEZONE}" > /etc/timezone && echo -e "[\e[32m*\e[0m] Configuring Timezone"
+else
+echo "UTC" > /etc/timezone && echo -e "[\e[32m*\e[0m] Configuring Timezone"
+fi
+
+if emerge --config sys-libs/timezone-data | grep "invalid"; then
+echo "UTC" >/etc/timezone; emerge --config sys-libs/timezone-data \
+&& echo -e "[\e[32m*\e[0m] Resetting to UTC" \
+|| echo -e "[\e[31m*\e[0m] Resetting to UTC"
+fi
+
+# HOST CONFIGURATION
+if [[ -z $(cat "${CHDIR}/locale.gen" | tail -n +22 | sed '/^#/ d' | sed '/^\s*$/d') ]]; then
+sed -i '/en_US.UTF-8/d' /etc/locale.gen
+echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen && echo -e "[\e[32m*\e[0m] Configuring locale" \
+|| echo -e "[\e[31m*\e[0m] Configuring locale"
+else
+echo $(cat "${CHDIR}/locale.gen") > /etc/locale.gen
+sed -i '/en_US.UTF-8/d' /etc/locale.gen
+echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen && echo -e "[\e[32m*\e[0m] Configuring locale" \
+|| echo -e "[\e[31m*\e[0m] Configuring locale"
+fi
+
+locale-gen
+export LC_ALL="en_US.UTF-8"
+SETLOC=$(eselect locale list | grep en_US | awk -F ' ' '{ print $1 }' \
+| awk -F '[' '{ print $2 }' | awk -F ']' '{ print $1 }')
+
+eselect locale set ${SETLOC} && echo -e "[\e[32m*\e[0m] Setting locale to en_US" \
+|| echo -e "[\e[31m*\e[0m] Setting locale en_US"
+unset SETLOC
+chsinit_mon 4
+fi
+
+# GENERATING FSTAB
+cat "${CHDIR}/fstab" > /etc/fstab && echo -e "[\e[32m*\e[0m] Creating fstab entries" \
+|| echo -e "[\e[31m*\e[0m] Creating fstab entries"
+
+{ while read -r i; do
+	case $(echo $i | awk -F ' ' '{ print $1 }') in
+		tmpfs)
+			echo #>> /etc/fstab
+			echo "# $(echo $i | awk -F ' ' '{ print $2 }')" >> /etc/fstab
+			echo "tmpfs $(echo $i | awk -F ' ' '{ print $2 }') tmpfs nodev,nosuid,size=$(echo $i | awk -F ' ' '{ print $3 }')" >> /etc/fstab
+			;;
+		symlink)
+			if [[ $(echo $i | awk -F ' ' '{ print $2 }') == 'f=n' ]]; then
+				echo "ln -s $(echo $i | awk -F ' ' '{ print $3 }') $(echo $i | awk -F ' ' '{ print $4 }')"
+			elif [[ $(echo $i | awk -F ' ' '{ print $2 }') == 'f=y' ]]; then
+				mkdir -p $(echo $i | awk -F ' ' '{ print $3 }')
+				echo "ln -s $(echo $i | awk -F ' ' '{ print $4 }') $(echo $i | awk -F ' ' '{ print $5 }')"
+			fi
+			;;
+		bindmount)
+			if [[ $(echo $i | awk -F ' ' '{ print $2 }') == 'f=n' ]]; then
+				echo >> /etc/fstab
+				echo "# bind mount: $(echo $i | awk -F ' ' '{ print $3 }')" >> /etc/fstab
+				echo "$(echo $i | awk -F ' ' '{ print $3 }') $(echo $i | awk -F ' ' '{ print $4 }') none rw,bind 0 0" >> /etc/fstab
+			elif [[ $(echo $i | awk -F ' ' '{ print $2 }') == 'f=y' ]]; then
+				echo >> /etc/fstab
+				echo "# bind mount: $(echo $i | awk -F ' ' '{ print $4 }')" >> /etc/fstab
+				mkdir -p $(echo $i | awk -F ' ' '{ print $3 }')
+				echo "$(echo $i | awk -F ' ' '{ print $4 }') $(echo $i | awk -F ' ' '{ print $5 }') none rw,bind 0 0" >> /etc/fstab
+			fi
+			;;
+		overlay)
+			echo >> /etc/fstab
+			echo "# overlay: $(echo $i | awk -F ' ' '{ print $2 }')" >> /etc/fstab
+			OVLFSLD=$(echo $i | awk -F ' ' '{ print $2 }')
+			OVLFSUD=$(echo $i | awk -F ' ' '{ print $3 }')
+			OVLFSWD=$(echo $i | awk -F ' ' '{ print $4 }')
+			echo "overlay /merged overlay noauto,lowerdir=${OVLFSLD},uperdir=${OVLFSUD},workdir=${OVLFSWD} 0 0" >> /etc/fstab
+			unset OVLFSLD
+			unset OVLFSUD
+			unset OVLFSWD
+			;;
+	esac
+done < <(cat "${CHDIR}/system_links" | sed '/^#/ d' | sed '/^\s*$/d'); } && chprint_inf 1 || { chprint_inf 2; exit 1; } \
+&& echo -e "[\e[32m*\e[0m] Creating system links and requested fstab entries" \
+|| echo -e "[\e[31m*\e[0m] Creating system links and requested fstab entries"
+
+if cp "${CHDIR}/hostname" /etc/conf.d/hostname; then
+echo -e "[\e[32m*\e[0m] Configuring hostname"
+else
+echo -e "[\e[31m*\e[0m] Configuring hostname"
+fi
+
+if cp "${CHDIR}/net"  /etc/conf.d/net; then
+echo -e "[\e[32m*\e[0m] Configuring /etc/conf.d/net"
+else
+echo -e "[\e[31m*\e[0m] Configuring /etc/conf.d/net"
+fi
+
+echo "Configuring /etc/ssh/sshd_config"
+if cp "${CHDIR}/sshd"  /etc/ssh/sshd_config; then
+echo -e "[\e[32m*\e[0m] Configuring /etc/ssh/sshd_config"
+else
+echo -e "[\e[31m*\e[0m] Configuring /etc/ssh/sshd_config"
+fi
+
+mkdir -p /root/.ssh
+if cat "${CHDIR}/ssh.pub" | tail -n +4 > /root/.ssh/authorized_keys; then
+echo -e "[\e[32m*\e[0m] Adding ssh.pub key to /root/.ssh/authorized_keys"
+else
+echo -e "[\e[31m*\e[0m] Adding ssh.pub key to /root/.ssh/authorized_keys"
+fi
+
+# PART F BEGINS
+if [[ "$(awk -F '=' '/INSTALL/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+# This list will change
+clear; echo "Part F: Installing required packages"
+env-update > /dev/null 2>&1 && source /etc/profile && export PS1="( 'Part F: Installing required packages' ) $PS1"
+export PATH=${PATH}:${CHDIR}
+
+if [[ "$(awk -F '=' '/RESUMEINST/{ print $2 }' <"${CHDIR}/chsinprog")" == 1 ]]; then
+emerge -v ${INS_PARTF} || { chsinit_mon 7; chprint_inf 2; exit 1; }
+else
+emerge -v "${INS_PARTF}" || { chsinit_mon 9; chprint_inf 2; exit 1; }
+fi
+
+echo "Emerging requested packages"
+sleep 1
+{ while read -r i; do
+	emerge -v "$i"
+done < <(cat "${CHDIR}/custom_pacl" | sed '/^#/ d' | sed '/^\s*$/d'); } \
+&& { echo -e "[\e[32m*\e[0m] Emerged successfully"; sleep 2; } || chprint_inf 2
+
+echo "Cleaning leftovers"
+emerge --depclean
+
+chsinit_mon 5
+fi
+
+# PART G BEGINS
+if [[ "$(awk -F '=' '/RUNLEVEL/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+clear; echo "Part G: Updating Runlevel Entries"
+env-update > /dev/null 2>&1 && source /etc/profile && export PS1="( 'Part G: Updating Runlevel Entries' ) $PS1"
+export PATH=${PATH}:${CHDIR}
+{ while read -r i; do
+rc-update "$(echo $i | awk -F ' ' '{ print $2 }')" "$(echo $i | awk -F ' ' '{ print $1 }')" \
+"$(echo $i | awk -F ' ' '{ print $3 }')"
+sleep 0.5
+done < <(cat "${CHDIR}/runlevels" | sed '/^#/ d' | sed '/^\s*$/d'); } \
+&& { echo -e "[\e[32m*\e[0m] Updated successfully"; sleep 2; } || chprint_inf 2
+chsinit_mon rn
+fi
+
+# PART H BEGINS
+if [[ "$(awk -F '=' '/KERNEL/{ print $2 }' <"${CHDIR}/chsinprog")" == 0 ]]; then
+clear; echo "Part H: Building the Kernel"
+env-update > /dev/null 2>&1 && source /etc/profile && export PS1="( 'Part H: Building the Kernel' ) $PS1"
+export PATH=${PATH}:${CHDIR}
+while true; do
+	echo "Do you wish to configure the kernel?"
+	echo "Please keep in mind that main function of the controller are related with kernel builtins"
+	echo "Do not disable: items to be listed"
+	read -p "Select an option Y/N: " SELCT
+		case ${SELCT:-y} in
+			[Yy][eE][sS]|[yY])
+				if genkernel --install kernel --menuconfig --kernel-config="${CHDIR}/kernel-conf"; then
+				echo "The built was successful"
+				else
+				chprint_inf 2; exit 1
+				fi;;
+			[nN][oO]|[nN])
+				if genkernel --install kernel --kernel-config="${CHDIR}/kernel-conf"; then
+				echo "The built was successful"
+				else
+				chprint_inf 2; exit 1
+				fi;;
+			*) echo "Wrong option";;
+		esac
+done
+chsinit_mon kern
+fi
+
+# Creating user-data dir-tree
+mkdir -p /user-data/persistent/{etc,var,logs,config.d,local,rmount}
+mkdir -p /user-data/persistent/local/{data,home,root,mnt,media}
+mkdir -p /user-data/tmpfs/{tmp,etc,run,opt,var}
diff --git a/scripts/chroot_scripts/chsinit_mon b/scripts/chroot_scripts/chsinit_mon
new file mode 100755
index 0000000..28ce390
--- /dev/null
+++ b/scripts/chroot_scripts/chsinit_mon
@@ -0,0 +1,27 @@
+#!/bin/bash
+
+case "$1" in
+	1)
+		sed -i -e 's/WEBRSYNC=0/WEBRSYNC=1/g' "${CHDIR}/chsinprog";;
+	2)
+		sed -i -e 's/BOOTSTRAP=0/BOOTSTRAP=1/g' "${CHDIR}/chsinprog";;
+	3)
+		sed -i -e 's/REBUILD=0/REBUILD=1/g' "${CHDIR}/chsinprog";;
+	4)
+		sed -i -e 's/CONFIGURE=0/CONFIGURE=1/g' "${CHDIR}/chsinprog";;
+	5)
+		sed -i -e 's/INSTALL=0/INSTALL=1/g' "${CHDIR}/chsinprog";;
+	6)
+		sed -i -e 's/RESUMEREBUILD=1/RESUMEREBUILD=0/g' "${CHDIR}/chsinprog";;
+	7)
+		sed -i -e 's/RESUMEINSTALL=1/RESUMEINSTALL=0/g' "${CHDIR}/chsinprog";;
+	8)
+		sed -i -e 's/RESUMEREB=0/RESUMEREB=1/g' "${CHDIR}/chsinprog";;
+	9)
+		sed -i -e 's/RESUMEINST=0/RESUMEINST=1/g' "${CHDIR}/chsinprog";;
+	rn)
+		sed -i -e 's/RUNLEVEL=0/RUNLEVEL=1/g' "${CHDIR}/chsinprog";;
+	kern)
+		sed -i -e 's/KERNEL=0/KERNEL=1/g' "${CHDIR}/chsinprog";;
+	dn) ;;
+esac
diff --git a/scripts/chroot_scripts/chsinprog b/scripts/chroot_scripts/chsinprog
new file mode 100644
index 0000000..0f9931e
--- /dev/null
+++ b/scripts/chroot_scripts/chsinprog
@@ -0,0 +1,11 @@
+# Don't edit this file manually. It controlls the flow of builder's process
+WEBRSYNC=0
+BOOTSTRAP=0
+REBUILD=0
+CONFIGURE=0
+INSTALL=0
+RESUMEREB=0
+RESUMEINST=0
+RUNLEVEL=0
+KERNEL=0
+
diff --git a/scripts/functions/drv_interface b/scripts/functions/drv_interface
new file mode 100755
index 0000000..6bde77d
--- /dev/null
+++ b/scripts/functions/drv_interface
@@ -0,0 +1,180 @@
+#!/bin/bash
+
+fs_opt() {
+	case $1 in
+		1)
+			echo -e "###############  \e[94m~~File systems~~\e[39m   ###############"
+			echo "##						 ##"
+			echo -e "## [ \e[32mI\e[39m  ]	ext2		                 ##"
+			echo -e "## [ \e[32mII\e[39m ]	ext3				 ##"
+			echo -e "## [ \e[32mIII\e[39m]	ext4				 ##"
+			echo -e "## [ \e[32mIV\e[39m ]	btrfs				 ##"
+			echo -e "## [ \e[32mV\e[39m  ]	vfat				 ##"
+			echo "##						 ##"
+			echo "###################################################"
+			;;
+	esac
+}
+
+FS_OPTS=(BOOT SYS USERDATA)
+
+for i in "${FS_OPTS[@]}"; do
+		clear; fs_opt 1
+		read -p "Please select the fs type of $i partition: " SELCT
+		case ${SELCT:-5} in
+			I|i|1|-I|-i|-1)
+				eval $i=ext2;;
+			II|ii|2|-II|-ii|-2)
+				eval $i=ext3;;
+			III|iii|3|-III|-iii|-3)
+				eval $i=ext4;;
+			IV|iv|4|-IV|-iv|-4)
+				eval $i=btrfs;;
+			V|v|5|-V|-v|-5)
+				eval $i=vfat;;
+			* ) clear; men_opt 7;;
+		esac
+done
+
+[[ $BOOT == btrfs ]] && { FBOPTIONS='ro,noatime,subvol=/bootfs'; BDPPS='0 0'; } \
+|| { FBOPTIONS='ro,noatime'; BDPPS='0 2'; }
+
+[[ $SYS == btrfs ]] && { FSOPTIONS='ro,noatime,subvol=/sysfs'; SDPPS='0 0'; } \
+|| { FSOPTIONS="ro,noatime"; SDPPS="0 1"; }
+
+[[ $USERDATA == btrfs ]] && { FUOPTIONS='defaults,noatime,subvol=/userdata'; UDPPS='0 0'; } \
+|| { FUOPTIONS='defaults,noatime'; UDPPS='0 1'; }
+
+cat >"${CONFDIR}/system/fstab" <<\EOF
+# /etc/fstab: static file system information.
+#
+# noatime turns off atimes for increased performance (atimes normally aren't
+# needed); notail increases performance of ReiserFS (at the expense of storage
+# efficiency).  It's safe to drop the noatime options if you want and to
+# switch between notail / tail freely.
+#
+# The root filesystem should have a pass number of either 0 or 1.
+# All other filesystems should have a pass number of 0 or greater than 1.
+#
+# See the manpage fstab(5) for more information.
+#
+
+# <fs>                  <mountpoint>    <type>          <opts>          <dump/pass>
+
+# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
+#
+# NOTE: Even though we list ext4 as the type here, it will work with ext2/ext3
+#       filesystems.  This just tells the kernel to use the ext4 driver.
+#
+# NOTE: You can use full paths to devices like /dev/sda3, but it is often
+#       more reliable to use filesystem labels or UUIDs. See your filesystem
+#       documentation for details on setting a label. To obtain the UUID, use
+#       the blkid(8) command.
+
+#LABEL=boot             /boot           ext4            noauto,noatime  1 2
+#UUID=58e72203-57d1-4497-81ad-97655bd56494              /               ext4            noatime         0 1
+#LABEL=swap             none            swap            sw              0 0
+#/dev/cdrom             /mnt/cdrom      auto            noauto,ro       0 0
+EOF
+
+# Boot
+echo >> "${CONFDIR}/system/fstab"
+echo "# BOOT" >> "${CONFDIR}/system/fstab"
+echo "LABEL=BOOT /boot ${BOOT} ${FBOPTIONS} ${BDPPS}" >>"${CONFDIR}/system/fstab"
+
+# System
+echo >> "${CONFDIR}/system/fstab"
+echo "# SYSTEM"	>> "${CONFDIR}/system/fstab"
+echo "LABEL=SYSTEM / ${SYS} ${FSOPTIONS} ${SDPPS}" >>"${CONFDIR}/system/fstab"
+
+# User-data
+echo >> "${CONFDIR}/system/fstab"
+echo "# USER-DATA" >> "${CONFDIR}/system/fstab"
+echo "LABEL=USERDATA /user-data ${USERDATA}	${FUOPTIONS} ${UDPPS}" >>"${CONFDIR}/system/fstab"
+
+# Home
+echo >> "${CONFDIR}/system/fstab"
+echo "# HOME" >> "${CONFDIR}/system/fstab"
+echo "/user-data/persistent/home /home/ none rw,bind 0 0" >>"${CONFDIR}/system/fstab"
+
+# var/tmp
+echo >> "${CONFDIR}/system/fstab"
+echo "# HOME" >> "${CONFDIR}/system/fstab"
+echo "tmpfs /var/tmp tmpfs nodev,nosuid,size=512M 0 0" >>"${CONFDIR}/system/fstab"
+
+# tmp
+echo >> "${CONFDIR}/system/fstab"
+echo "# HOME" >> "${CONFDIR}/system/fstab"
+echo "tmpfs /tmp tmpfs nodev,nosuid,size=512M 0 0" >>"${CONFDIR}/system/fstab"
+
+echo "BOOT ${BOOT}" > "${CONFDIR}/system/fstab.info"
+echo "SYS ${SYS}" >> "${CONFDIR}/system/fstab.info"
+echo "USERDATA ${USERDATA}" >> "${CONFDIR}/system/fstab.info"
+
+unset BOOT
+unset SYS
+unset USERDATA
+unset FS_OPTSS
+
+FS_OPTS=(BOOT SYS USERDATA)
+echo "${FS_OPTS[@]}"
+
+while true; do
+	for i in "${FS_OPTS[@]}"; do
+		clear; echo "Please give the device name of $i"
+		echo "Example: sda1"
+		echo "This device, on creation, will inherit the $i label"
+		read -p "$i device name: /dev/" DEVNAME
+		while true; do
+			echo "Your input was: /dev/${DEVNAME}"
+			read -p "Are you sure? " SELCT
+			case ${SELCT:-1} in
+			[Yy][eE][sS]|[yY])
+				eval $i="/dev/$DEVNAME"; break;;
+			[nN][oO]|[nN])
+				echo "Give a new value: "
+				read -p "$i device name: /dev/" DEVNAME;;
+			*)
+				clear; echo "Wrong option";;
+			esac
+		done
+	done
+
+if [[ -n "${BOOT}" && -n "${SYS}" && -n "${USERDATA}" ]]; then
+if [[ "${BOOT}" == "${SYS}" || "${BOOT}" == "${USERDATA}" ]]; then
+case "${BOOT}" in
+	"${SYS}")
+		echo "BOOT partition can not be the same with SYSTEM partition";;
+	*)
+		echo "BOOT partition can not be the same with USERDATA partition";;
+esac
+echo "Resetting the process"
+sleep 5
+else
+if [[ "${SYS}" == "${USERDATA}" ]]; then
+	echo "SYSTEM partition can not be the same with USERDATA partition"
+	echo "Resetting the process"
+	sleep 5
+else
+	break
+fi
+fi
+fi
+
+done
+
+echo "BOOT ${BOOT}" > "${CONFDIR}/system/devname.info"
+echo "SYS ${SYS}" >> "${CONFDIR}/system/devname.info"
+echo "USERDATA ${USERDATA}" >> "${CONFDIR}/system/devname.info"
+
+unset DEVNAME
+unset BOOT
+unset SYS
+unset USERDATA
+unset FBOPTIONS
+unset FSOPTIONS
+unset FUOPTIONS
+unset BDPPS
+unset SDPPS
+unset UDPPS
+unset FS_OPTS
diff --git a/scripts/functions/init_stage3_seq b/scripts/functions/init_stage3_seq
new file mode 100644
index 0000000..32b1802
--- /dev/null
+++ b/scripts/functions/init_stage3_seq
@@ -0,0 +1,131 @@
+#!/bin/bash
+
+# GET LATEST PORTAGE SNAPSHOT, CREATE GSE PROFILE AND LAST INITIATE THE STAGE 1,2,3 BUILD SEQUENCE
+CATADIR=$(grep storedir "${CONFDIR}/system/catalyst/catalyst.conf" \
+| sed '/^#/ d' | awk -F '=' '{ print $2 }' | sed  -e "s_\"__g")
+CATPORTDIR=$(grep portdir "${CONFDIR}/system/catalyst/catalyst.conf" \
+| sed '/^#/ d' | awk -F '=' '{ print $2 }' | sed  -e "s_\"__g")
+CATPORTCACHEDIR=$(grep "snapshot_cache" "${CONFDIR}/system/catalyst/catalyst.conf" \
+| sed '/^#/ d' | awk -F '=' '{ print $2 }' | sed  -e "s_\"__g")
+CATLOGDIR=$(grep "port_logdir" "${CONFDIR}/system/catalyst/catalyst.conf" \
+| sed '/^#/ d' | awk -F '=' '{ print $2 }' | sed  -e "s_\"__g")
+CATDISTDIR=$(grep "distdir" "${CONFDIR}/system/catalyst/catalyst.conf" \
+| sed '/^#/ d' | awk -F '=' '{ print $2 }' | sed  -e "s_\"__g")
+
+mkdir -p "${CATADIR}"
+mkdir -p "${CATPORTDIR}"
+mkdir -p "${CATPORTCACHEDIR}"
+mkdir -p "${CATLOGDIR}"
+mkdir -p "${CATDISTDIR}"
+
+# PORTAGE MD5SUM
+wget -O "${CATPORTDIR}/portage-latest.tar.bz2.md5sum" >/dev/null 2>&1 \
+http://distfiles.gentoo.org/snapshots/portage-latest.tar.bz2.md5sum \
+&& echo -e "[\e[32m*\e[0m] Getting md5sum" \
+|| echo -e "[\e[31m*\e[0m] Getting md5sum"
+
+BTWRK="${PWD}" && cd "${CATPORTDIR}" >/dev/null 2>&1
+if md5sum -c "portage-latest.tar.bz2.md5sum" >/dev/null 2>&1 && cd -; then
+{ cd "${BTWRK}" >/dev/null 2>&1
+echo -e "[\e[32m*\e[0m] Latest version is already present locally"; }
+else
+{ cd "${BTWRK}" >/dev/null 2>&1
+while true; do
+echo -e "[\e[31m*\e[0m] Portage snapshot is either corrupt or out of date!"
+read -p "Fetch new? Yn: " yn
+
+case $yn in
+[yY][eE][sS]|[yY])
+
+# PORTAGE SNAPSHOT
+rm -f "${CATPORTDIR}/portage-latest.tar.bz2" && echo -e "[\e[32m*\e[0m] Purging local snapshot"
+echo "Getting latest portage snapshot"
+wget -O "${CATPORTDIR}/portage-latest.tar.bz2" http://distfiles.gentoo.org/snapshots/portage-latest.tar.bz2 \
+&& print_inf 1 || { print_inf 2; exit 1; }
+
+# VERIFYING SNAPSHOT
+[[ $(cd "${CATPORTDIR}" md5sum -c "portage-latest.tar.bz2.md5sum" && cd "${BTWRK}") ]] \
+&& echo -e "[\e[32m*\e[0m] Snapshot verified" \
+|| echo -e "[\e[31m*\e[0m] Snapshot verified"
+break;;
+
+[nN][oO]|[nN])
+break;;
+esac
+done; }
+fi
+
+unset BTWRK
+
+echo "Extracting snapshot"
+tar xvjpf "${CATPORTDIR}/portage-latest.tar.bz2" -C "${CATPORTDIR}" >/dev/null 2>&1 \
+&& echo -e "[\e[32m*\e[0m] ALL GOOD" || echo -e "[\e[31m*\e[0m] AN ERROR OCCURRED"
+
+# GSE PROFILE DIRECTORIES AND FILES
+mkdir -p "${CATPORTDIR}/portage/profiles/gse"
+mkdir -p "${CATPORTDIR}/portage/profiles/defaults/linux/${ARCH}/13.0/gse"
+
+{ cp "${CONFDIR}/system/portage/profile/parent-gse/eapi" "${CATPORTDIR}/portage/profiles/gse/eapi"
+# MAKE.DEFAULTS
+cp "${CONFDIR}/system/portage/profile/parent-gse/make.defaults" "${CATPORTDIR}/portage/profiles/gse/make.defaults"
+# PACKAGE.USE
+cp "${CONFDIR}/system/portage/profile/parent-gse/package.use" "${CATPORTDIR}/portage/profiles/gse/package.use"
+# PACKAGE.USE.FORCE
+cp "${CONFDIR}/system/portage/profile/parent-gse/package.use.force" "${CATPORTDIR}/portage/profiles/gse/package.use.force"
+cp "${CONFDIR}/system/portage/profile/child-gse/eapi" "${CATPORTDIR}/portage/profiles/defaults/linux/${ARCH}/13.0/gse/eapi"
+# PARENT
+cp "${CONFDIR}/system/portage/profile/child-gse/parent" "${CATPORTDIR}/portage/profiles/defaults/linux/${ARCH}/13.0/gse/parent"
+} && echo -e "[\e[32m*\e[0m] Creating profile" \
+|| { echo -e "[\e[31m*\e[0m] Creating profile"; exit 1; }
+# END OF GSE PROFILE
+
+# BEGIN OF PORTAGE SNAPSHOT BUILD & STAGE{1,2,3} BUILD SEQUENCE
+VERCN=0
+while true; do
+	if [[ "${GSE_VER}.${VERCN}" != $(ls | grep "${GSE_VER}.${VERCN}") ]]; then
+		GSE_VER="${GSE_VER}.${VERCN}"
+	fi
+	((++VERCN))
+done
+unset VERCN
+# GENERATE NEW PORTAGE SNAPSHOT
+echo "Generating new portage snapshot"
+cp "${CONFDIR}/system/catalyst/catalyst.conf" "${CATADIR}/.catalyst.conf"
+cp "${CONFDIR}/system/catalyst/catalystrc" "${CATADIR}/.catalystrc"
+catalyst -c "${CONFDIR}/system/catalyst/catalyst.conf" -s "${GSE_VER}" \
+&& print_inf 1 || { print_inf 2 && exit 1; }
+
+# STAGE 1
+echo "Building stage1"
+cat "${CONFDIR}/system/catalyst/stage1.spec" | sed '/^#/ d' | sed '/^\s*$/d' \
+> "${CATADIR}/catalyst/.stage1.spec"
+awk -F ' ' '/snapshot:/{ print $2 }' < "${CATADIR}/.stage1.spec" \
+| sed -i -e "s_AUTOEDITED_"${GSE_VER}"_g"
+catalyst -c "${CONFDIR}/system/catalyst/catalyst.conf" -f "${CATADIR}/.stage1.spec" \
+&& print_inf 1 || { print_inf 2 && sinit_mon 8 && exit 1; }
+
+# STAGE 2
+echo "Building stage2"
+cat "${CONFDIR}/system/catalyst/stage2.spec" | sed '/^#/ d' | sed '/^\s*$/d' \
+> "${CATADIR}/.stage2.spec"
+awk -F ' ' '/snapshot:/{ print $2 }' < "${CATADIR}/.stage2.spec" \
+| sed -i -e "AUTOEDITED"${GSE_VER}"_g"
+catalyst -c "${CONFDIR}/system/catalyst/catalyst.conf" -f "${CATADIR}/.stage2.spec" \
+&& print_inf 1 || { print_inf 2 && sinit_mon 8 && exit 1; }
+
+# STAGE 3
+echo "Building stage3"
+cat "${CONFDIR}/system/catalyst/stage3.spec" | sed '/^#/ d' | sed '/^\s*$/d' \
+> "${CATADIR}/.stage3.spec"
+awk -F ' ' '/snapshot:/{ print $2 }' < "${CATADIR}/.stage3.spec" \
+| sed -i -e "s_AUTOEDITED_"${GSE_VER}"_g"
+catalyst -c "${CONFDIR}/system/catalyst/catalyst.conf" -f "${CATADIR}/.stage3.spec" \
+&& { print_inf 1 && sinit_mon 7 && echo "CATALYST=0" > "${LOCALLG}/tborigin"; } \
+|| { print_inf 2 && sinit_mon 8 && echo "CATALYST=1" > "${LOCALLG}/tborigin" && exit 1; }
+
+unset CATADIR
+unset CATPORTDIR
+unset CATPORTCACHEDIR
+unset CATLOGDIR
+unset CATDISTDIR
+
diff --git a/scripts/functions/lcreq b/scripts/functions/lcreq
new file mode 100755
index 0000000..3ac6d58
--- /dev/null
+++ b/scripts/functions/lcreq
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# Check local requirements
+
+amiroot() {
+	if [[ "$1" == "0" ]]
+	then
+		return 0
+	else
+		return 1
+	fi
+}
+
+[[ -n $(whereis eix | awk -F ':' '{ print $2 }' | sed '/^\s*$/d') ]] \
+|| { echo -e "[\e[33m*\e[0m] \e[35mPlease install eix to proceed!\e[0m" \
+&& { amiroot $UID && echo -e "[\e[32m*\e[0m] Root privileges found" \
+&& emerge -aq eix && echo -e "[\e[33m*\e[0m] \e[35mUpdating database\e[0m" \
+&& eix-sync -a >/dev/null 2>&1; } \
+|| { echo -e "[\e[31m*\e[0m] Could not get root privileges" \
+&& echo "Please resolve this issue and start again" && exit 1; }; }
+
+mapfile -t lreq < <(cat "${LOCALLG}/loc_req" | sed '/^#/ d' | sed '/^\s*$/d')
+
+for i in "${lreq[@]}"; do
+sleep 0.1
+if eix --installed $i >/dev/null 2>&1; then
+echo -e "[\e[32m*\e[0m] Searching for $i"
+else
+echo -e "[\e[31m*\e[0m] Searching for $i"
+echo -e "[\e[33m*\e[0m] Attempting to resolve the missing dependency"
+amiroot $UID && echo -e "[\e[32m*\e[0m] Root privileges found" \
+&& emerge -aq "$i" \
+|| { echo -e "[\e[31m*\e[0m] Could not get root privileges" \
+&& echo "Please resolve this issue and start again" && exit 1; }
+fi
+done
\ No newline at end of file
diff --git a/scripts/functions/makeconf_ed b/scripts/functions/makeconf_ed
new file mode 100755
index 0000000..3f91a8a
--- /dev/null
+++ b/scripts/functions/makeconf_ed
@@ -0,0 +1,307 @@
+#!/bin/bash
+
+# Configuration of make.conf
+[[ -z "${CONFDIR}" ]] && exit 1
+
+clear; while true; do
+echo "You can automatically generate the make.conf based on the machine or configure it following the guider"
+echo "Configure manually with the guider? "
+read -p "Select an option: " SELCT
+case ${SELCT:-9} in
+[Yy][eE][sS]|[yY])
+break ;;
+[nN][oO]|[nN])
+export CORES="$(cat /proc/cpuinfo | grep processor | wc -l)"
+echo "Starting automatic configuration..."
+sleep 1
+print_inf 1
+cat >"${CONFDIR}/system/portage/make.conf" <<\EOF
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+EOF
+echo "CFLAGS=\"-O2 -pipe\"">>"${CONFDIR}/system/portage/make.conf"
+cat >>"${CONFDIR}/system/portage/make.conf" <<\EOF
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE and USE_EXPAND flags that were used for
+# buidling in addition to what is provided by the profile.
+USE="bindist"
+CPU_FLAGS_X86="mmx sse sse2"
+PORTDIR="/usr/portage"
+DISTDIR="${PORTDIR}/distfiles"
+PKGDIR="${PORTDIR}/packages"
+# MAKE OPTS
+EOF
+echo "MAKEOPTS="\"-j${CORES}\""">>"${CONFDIR}/system/portage/make.conf"
+echo "# EMERGE DEFAULT OPTS">>"${CONFDIR}/system/portage/make.conf"
+echo "EMERGE_DEFAULT_OPTS="\"--load-average ${CORES}\""">>"${CONFDIR}/system/portage/make.conf"
+echo "# MIRRORS">>"${CONFDIR}/system/portage/make.conf"
+
+echo "Determining optimal servers..."
+
+GENMIRR="$(netselect -v -t2 -s10 ftp://ftp.swin.edu.au/gentoo http://ftp.swin.edu.au/gentoo http://gd.tuwien.ac.at/opsys/linux/gentoo/ ftp://gd.tuwien.ac.at/opsys/linux/gentoo/ \
+rsync://gentoo.c3sl.ufpr.br/gentoo/ http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://www.las.ic.unicamp.br/pub/gentoo/ \
+ftp://ftp.las.ic.unicamp.br/pub/gentoo/ http://mirrors.telepoint.bg/gentoo/ rsync://mirrors.telepoint.bg/gentoo/ rsync://gentoo.gossamerhost.com/gentoo-distfiles/ \
+http://gentoo.gossamerhost.com ftp://mirrors.tera-byte.com/pub/gentoo http://gentoo.mirrors.tera-byte.com/ rsync://mirrors.tera-byte.com/gentoo \
+ftp://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/ http://mirrors.163.com/gentoo/ \
+http://mirrors.xmu.edu.cn/gentoo ftp://mirrors.xmu.edu.cn/gentoo rsync://mirrors.xmu.edu.cn/gentoo/ http://gentoo.supp.name/ \
+http://ftp.fi.muni.cz/pub/linux/gentoo/ rsync://ftp.fi.muni.cz/pub/linux/gentoo/ rsync://ftp6.linux.cz/pub/linux/gentoo/ ftp://ftp.fi.muni.cz/pub/linux/gentoo/ \
+ftp://mirror.dkm.cz/gentoo/ https://mirror.dkm.cz/gentoo/ http://mirror.dkm.cz/gentoo/ rsync://mirror.dkm.cz/gentoo/ http://gentoo.mirror.web4u.cz/ \
+ftp://gentoo.mirror.web4u.cz/ ftp://trumpetti.atm.tut.fi/gentoo/ http://trumpetti.atm.tut.fi/gentoo/ rsync://trumpetti.atm.tut.fi/gentoo/ \
+ftp://ftp.free.fr/mirrors/ftp.gentoo.org/ ftp://gentoo.imj.fr/pub/gentoo/ http://gentoo.modulix.net/gentoo/ http://gentoo.mirrors.ovh.net/gentoo-distfiles/ \
+ftp://gentoo.mirrors.ovh.net/gentoo-distfiles/ ftp://mirrors.soeasyto.com/distfiles.gentoo.org/ http://mirrors.soeasyto.com/distfiles.gentoo.org/ \
+http://mirror.eu.oneandone.net/linux/distributions/gentoo/gentoo/ rsync://mirror.eu.oneandone.net/gentoo/ ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo \
+http://mirror.netcologne.de/gentoo/ rsync://mirror.netcologne.de/gentoo/ ftp://mirror.netcologne.de/gentoo/ http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ \
+http://ftp.halifax.rwth-aachen.de/gentoo/ ftp://ftp.halifax.rwth-aachen.de/gentoo/ rsync://ftp.halifax.rwth-aachen.de/gentoo/ \
+ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo http://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo \
+ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ http://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/ rsync://ftp-stud.hs-esslingen.de/gentoo/ \
+ftp://files.gentoo.gr http://files.gentoo.gr http://ftp.ntua.gr/pub/linux/gentoo/ ftp://ftp.ntua.gr/pub/linux/gentoo/ http://gentoo.aditsu.net:8000/ \
+rsync://ftp.heanet.ie/pub/gentoo/ http://ftp.heanet.ie/pub/gentoo/ ftp://ftp.heanet.ie/pub/gentoo/ http://mirror.isoc.org.il/pub/gentoo/ \
+ftp://mirror.isoc.org.il/gentoo/ ftp://ftp.iij.ad.jp/pub/linux/gentoo/ rsync://ftp.iij.ad.jp/pub/linux/gentoo/ http://ftp.iij.ad.jp/pub/linux/gentoo/ \
+rsync://ftp.jaist.ac.jp/pub/Linux/Gentoo/ http://ftp.jaist.ac.jp/pub/Linux/Gentoo/ ftp://ftp.jaist.ac.jp/pub/Linux/Gentoo/ rsync://mirror.neolabs.kz/gentoo \
+http://mirror.neolabs.kz/gentoo/pub ftp://mirror.neolabs.kz/gentoo/pub http://mirror.leaseweb.com/gentoo/ rsync://mirror.leaseweb.com/gentoo/ \
+ftp://mirror.leaseweb.com/gentoo/ ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo rsync://ftp.snt.utwente.nl/gentoo http://ftp.snt.utwente.nl/pub/os/linux/gentoo \
+http://gentoo.prz.rzeszow.pl rsync://gentoo.prz.rzeszow.pl/gentoo rsync://ftp.vectranet.pl/gentoo/ http://ftp.vectranet.pl/gentoo/ ftp://ftp.vectranet.pl/gentoo/ \
+ftp://ftp.rnl.tecnico.ulisboa.pt/pub/gentoo/gentoo-distfiles/ http://ftp.rnl.tecnico.ulisboa.pt/pub/gentoo/gentoo-distfiles/ \
+rsync://ftp.rnl.tecnico.ulisboa.pt/pub/gentoo/gentoo-distfiles/ ftp://ftp.dei.uc.pt/pub/linux/gentoo/ http://ftp.dei.uc.pt/pub/linux/gentoo/ \
+http://ftp.romnet.org/gentoo/ http://mirrors.xservers.ro/gentoo/ rsync://gentoo.bloodhost.ru/gentoo-distfiles http://gentoo.bloodhost.ru/ \
+ftp://gentoo.bloodhost.ru/ ftp://xeon.gentoo.ru/mirrors/gentoo/distfiles/ ftp://mirror.yandex.ru/gentoo-distfiles/ http://mirror.yandex.ru/gentoo-distfiles/ \
+ftp://tux.rainside.sk/gentoo/ http://tux.rainside.sk/gentoo/ ftp://gentoo.wheel.sk/pub/linux/gentoo/ http://gentoo.wheel.sk/ http://ftp.daum.net/gentoo/ \
+http://ftp.kaist.ac.kr/pub/gentoo/ ftp://ftp.kaist.ac.kr/gentoo/ https://ftp.lanet.kr/pub/gentoo/ http://ftp.lanet.kr/pub/gentoo/ ftp://ftp.lanet.kr/pub/gentoo/ \
+http://gentoo-euetib.upc.es/mirror/gentoo/ http://mirror.mdfnet.se/gentoo ftp://mirror.mdfnet.se/gentoo http://mirror.switch.ch/ftp/mirror/gentoo/ \
+ftp://mirror.switch.ch/mirror/gentoo/ ftp://ftp.twaren.net/Linux/Gentoo/ http://ftp.twaren.net/Linux/Gentoo/ http://ftp.linux.org.tr/gentoo/ \
+rsync://ftp.linux.org.tr/gentoo-distfiles/ ftp://ftp.linux.org.tr/gentoo/ ftp://mirror.bytemark.co.uk/gentoo/ http://mirror.bytemark.co.uk/gentoo/ \
+rsync://mirror.bytemark.co.uk/gentoo/ http://mirrors.evowise.com/gentoo/ http://mirror.qubenet.net/mirror/gentoo/ ftp://ftp.mirrorservice.org/sites/distfiles.gentoo.org/ \
+http://www.mirrorservice.org/sites/distfiles.gentoo.org/ rsync://rsync.mirrorservice.org/distfiles.gentoo.org/ http://gentoo.iteam.net.ua/ \
+http://gentoo.mirrors.easynews.com/linux/gentoo/ rsync://rsync.gtlib.gatech.edu/gentoo ftp://ftp.gtlib.gatech.edu/pub/gentoo http://www.gtlib.gatech.edu/pub/gentoo \
+ftp://ftp.ussg.iu.edu/pub/linux/gentoo ftp://lug.mtu.edu/gentoo/ http://lug.mtu.edu/gentoo/ ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/ http://gentoo.netnitco.net \
+http://gentoo.osuosl.org/ http://gentoo.mirrors.pair.com/ ftp://gentoo.mirrors.pair.com/ ftp://mirrors.rit.edu/gentoo/ rsync://mirrors.rit.edu/gentoo/ \
+http://mirrors.rit.edu/gentoo/ ftp://mirror.iawnet.sandia.gov/pub/gentoo/ http://mirror.iawnet.sandia.gov/gentoo/ http://gentoo.mirrors.tds.net/gentoo \
+http://mirror.lug.udel.edu/pub/gentoo/ ftp://cosmos.illinois.edu/pub/gentoo/ http://cosmos.illinois.edu/pub/gentoo/ http://gentoo.cs.uni.edu/ \
+rsync://gentoo.cs.uni.edu/gentoo-distfiles http://mirror.usu.edu/mirrors/gentoo/ \
+| awk -F ' ' '{ print $2 }' 2>/dev/null)" \
+&& print_inf 1 || { print_inf 2 echo "There was a problem automatically generating the servers."
+echo "Please use manually: mirrorselect -i -o >> {CONFDIR}/system/portage/make.conf"; }
+
+echo "GENTOO_MIRRORS=\""${GENMIRR}"\"" >>"${CONFDIR}/system/portage/make.conf"
+unset GENMIRR
+unset CORE
+exit 0;;
+*)
+clear;;
+esac
+done
+
+opt_men (){
+	case $1 in
+		1 )
+			echo -e "######################  \e[94m~~Optimization Options~~\e[39m   #####################"
+			echo "##							   	      ##"
+			echo -e "## [ \e[32m1\e[39m ]	-O 		   	 		    	      ##"
+			echo -e "## [ \e[32m2\e[39m ]	-O[0]		   				      ##"
+			echo -e "## [ \e[32m3\e[39m ]	-O[1]				   		      ##"
+			echo -e "## [ \e[32m4\e[39m ]	-O[2]			   			      ##"
+			echo -e "## [ \e[32m5\e[39m ]	-O[3]			   			      ##"
+			echo -e "## [ \e[32m6\e[39m ]	-O[s]			   			      ##"
+			echo -e "## [ \e[32m7\e[39m ]	-O[g]			   			      ##"
+			echo -e "## [ \e[32m8\e[39m ]	-O[fast]  					      ##"
+			echo -e "## [ \e[32m9\e[39m ]	Exit  					              ##"
+			echo "##							   	      ##"
+			echo "########################################################################"
+			;;
+	esac
+}
+
+cat >"${CONFDIR}/system/portage/make.conf" <<\EOF
+# These settings were set by the catalyst build script that automatically
+# built this stage.
+# Please consult /usr/share/portage/config/make.conf.example for a more
+# detailed example.
+ENTRY1
+CXXFLAGS="${CFLAGS}"
+# WARNING: Changing your CHOST is not something that should be done lightly.
+# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
+CHOST="x86_64-pc-linux-gnu"
+# These are the USE and USE_EXPAND flags that were used for
+# buidling in addition to what is provided by the profile.
+# CPU_FLAGS_X86=
+ENTRY2
+# USE
+ENTRY3
+PORTDIR="/usr/portage"
+DISTDIR="${PORTDIR}/distfiles"
+PKGDIR="${PORTDIR}/packages"
+# MAKE OPTS
+ENTRY4
+# EMERGE DEFAULT OPTS
+ENTRY5
+# MIRRORS
+EOF
+
+optim() {
+	while true; do
+		opt_men 1
+		read -p "Select an option: " SELCT
+		case ${SELCT:-9} in
+			1) 
+				sed -i -e 's/ENTRY1/CFLAGS="-O -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			2)
+				sed -i -e 's/ENTRY1/CFLAGS="-O0 -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			3)
+				sed -i -e 's/ENTRY1/CFLAGS="-O1 -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			4)
+				sed -i -e 's/ENTRY1/CFLAGS="-O2 -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			5)
+				sed -i -e 's/ENTRY1/CFLAGS="-O3 -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			6)
+				sed -i -e 's/ENTRY1/CFLAGS="-Os -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			7)
+				sed -i -e 's/ENTRY1/CFLAGS="-Og -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			8)
+				sed -i -e 's/ENTRY1/CFLAGS="-Ofast -pipe"/g' "${CONFDIR}/system/portage/make.conf"; break ;;
+			9)
+				return 1;;
+			*)
+				clear;  echo "Wrong option";;
+		esac
+	done
+}
+
+cpuflagsx86() {
+	incld=(aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3)
+	cpufx86=''
+	for i in "${incld[@]}"; do
+		while true; do
+			read -p "Include CPU_FLAGS_X86: $i?: " SELCT
+			case ${SELCT:-n} in
+				[Yy][eE][sS]|[yY])
+					cpufx86="${cpufx86} $i"; break ;;
+				[nN][oO]|[nN])
+					break;;
+				*)
+					echo "Wrong option";;
+			esac
+		done
+	done
+	sed -i -e s/ENTRY2/CPU_FLAGS_X86=\""${cpufx86}"\"/g "${CONFDIR}/system/portage/make.conf"
+	unset cpufx86
+	unset incld
+}
+
+
+makeopts() {
+	while true; do
+		read -p "Do you want to include MAKEOPTS?: " SELCT
+		case ${SELCT:-1} in
+			[Yy][eE][sS]|[yY])
+				echo "Enter the number of cores for the target system?"
+				read -p "Cores: " CRS
+				while true; do
+					echo "Your input was: ${CRS}"
+					read -p "Are you sure? " SELCT
+					case ${SELCT:-1} in
+					[Yy][eE][sS]|[yY])
+						sed -i -e "s/ENTRY4/MAKEOPTS=\"-j${CRS}\"/g" "${CONFDIR}/system/portage/make.conf"; break ;;
+					[nN][oO]|[nN])
+						echo "Give a new value: "
+						read -p "Cores: " CRS;;
+					*)
+						clear; echo "Wrong option";;
+					esac
+				done
+				unset CRS
+				break;;
+			[nN][oO]|[nN])
+				sed -i -e "s/ENTRY4//g" "${CONFDIR}/system/portage/make.conf"; break ;;
+			*)
+				echo "Wrong option";;
+		esac
+	done
+}
+
+usef() {
+	while true; do
+		read -p "Do you want to import USE FLAGS?: " SELCT
+		case ${SELCT:-y} in
+			[Yy][eE][sS]|[yY])
+				vim "${CONFDIR}/system/portage/usef"
+				USEFLAGS=$(cat "${CONFDIR}/system/portage/usef")
+				sed -i -e "s/ENTRY3/"${USEFLAGS}"/g" "${CONFDIR}/system/portage/make.conf"
+				unset USEFLAGS
+				break;;
+			[nN][oO]|[nN])
+				sed -i -e "s/ENTRY3//g" "${CONFDIR}/system/portage/make.conf"
+				break;;
+			*)
+				echo "Wrong option";;
+		esac
+	done
+}
+
+defemopt() {
+	while true; do
+		read -p "Do you want to include EMERGE_DEFAULT_OPTS?: " SELCT
+		case ${SELCT:-y} in
+			[Yy][eE][sS]|[yY])
+				vim "${CONFDIR}/system/portage/emdefopt"
+				EMDOPT=$(cat "${CONFDIR}/system/portage/emdefopt")
+				sed -i -e "s/ENTRY5/"${EMDOPT}"/g" "${CONFDIR}/system/portage/make.conf"
+				unset EMDOPT
+				break;;
+			[nN][oO]|[nN])
+				sed -i -e "s/ENTRY5//g" "${CONFDIR}/system/portage/make.conf"
+				break;;
+			*)
+				echo "Wrong option";;
+		esac
+	done
+}
+
+optim
+cpuflagsx86
+
+if [[ ! -e "${CONFDIR}/system/portage/usef" ]]; then
+cat >"${CONFDIR}/system/portage/usef" <<\EOF
+USE=""
+EOF
+fi
+
+if [[ ! -e "${CONFDIR}/system/portage/emdefopt" ]]; then
+cat >"${CONFDIR}/system/portage/emdefopt" <<\EOF
+EMERGE_DEFAULT_OPTS=""
+EOF
+fi
+
+makeopts
+usef
+defemopt
+
+while true; do
+	echo "Enter server selection menu? "
+	read -p "Y/N?: " SELCT
+	case ${SELCT:-y} in
+		[Yy][eE][sS]|[yY])
+			mirrorselect -i -o >> "${CONFDIR}/system/portage/make.conf"; break;;
+		[nN][oO]|[nN])
+			break;;
+		*)
+			echo "Wrong option";;
+	esac
+done
+
+while true; do
+	echo "Do you wish to make some manual changes? "
+	read -p "Y/N?: " SELCT
+	case ${SELCT:-y} in
+		[Yy][eE][sS]|[yY])
+			vim "${CONFDIR}/system/portage/make.conf"; break;;
+		[nN][oO]|[nN])
+			break;;
+		*)
+			echo "Wrong option";;
+	esac
+done
diff --git a/scripts/functions/pack_request b/scripts/functions/pack_request
new file mode 100755
index 0000000..7f0f7e9
--- /dev/null
+++ b/scripts/functions/pack_request
@@ -0,0 +1 @@
+extra user packages
\ No newline at end of file
diff --git a/scripts/functions/print_inf b/scripts/functions/print_inf
new file mode 100755
index 0000000..e859e05
--- /dev/null
+++ b/scripts/functions/print_inf
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+# Error messages
+case $1 in
+	1)
+		echo -e "[\e[32m*\e[0m] Done";;
+	2)
+		echo -e "[\e[31m*\e[0m] FAILED";;
+	3)
+		clear
+		echo "If this message is printed while using the Maim Menu"
+		echo "That means essential files are altered or something bad is happening."
+		echo
+		echo "Please run a health-check from the ~Main Menu~ and a Version check first."
+		echo "If you see this again after the health/version check, please submit a bug report"
+		echo "and stop using the program, or data loss may occur."
+		echo
+		echo "Exiting..."
+		sleep 2
+		exit 1;;
+	4)
+		echo -e "[\e[31m*\e[0m] [\e[31mERROR\e[0m: Wrong parameters"
+		exit 1;;
+	5)
+		echo -e "[\e[31m*\e[0m] Failed getting version"
+esac
diff --git a/scripts/functions/sinit_mon b/scripts/functions/sinit_mon
new file mode 100755
index 0000000..37f0303
--- /dev/null
+++ b/scripts/functions/sinit_mon
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+case "$1" in
+	1)
+		sed -i -e 's/KEY=0/KEY=1/g' "${LOCALLG}/sinprog"
+		sed -i -e 's/NEW=0/NEW=1/g' "${LOCALLG}/sinprog";;
+	2)
+		sed -i -e 's/WGETST3=0/WGETST3=1/g' "${LOCALLG}/sinprog";;
+	3)
+		sed -i -e 's/VERIFICATION=0/VERIFICATION=1/g' "${LOCALLG}/sinprog";;
+	4)
+		sed -i -e 's/EXTRACTION=0/EXTRACTION=1/g' "${LOCALLG}/sinprog"
+		sed -i -e 's/PARTA=0/PARTA=1/g' "${LOCALLG}/sinprog";;
+	5)
+		sed -i -e 's/1/0/g' "${LOCALLG}/sinprog"
+		sed -i -e 's/NEW=1/NEW=0/g' "${LOCALLG}/sinprog"
+		sed -i -e 's/PARTA=1/PARTA=0/g' "${LOCALLG}/sinprog";;
+	6)
+		sed -i -e 's/PARTB=0/PARTA=1/g' "${LOCALLG}/sinprog";;
+	7)
+		sed -i -e 's/CATALYST=1/CATALYST=0/g' "${LOCALLG}/sinprog";;
+	dn) ;;
+esac
diff --git a/scripts/sinit b/scripts/sinit
new file mode 100755
index 0000000..228b299
--- /dev/null
+++ b/scripts/sinit
@@ -0,0 +1,208 @@
+#!/bin/bash
+
+# CHECK FOR THE POSITIONAL PARAMETERS AND BAILOUT IF THEY ARE MISSING
+[[ -z "${DISTDIR}" ]] && print_inf 4 && return 1
+echo "Checking for dependencies"
+lcreq || exit 1
+echo "Initializing..."
+sleep 0.5
+
+# ALL ESSENTIAL VARIABLES FOR THE DOWNLOAD AND AUTHENTICATION PROCESS
+source "${WORKDIR}/etc/gentoo.conf" >/dev/null 2>&1 && { echo -e "[\e[32m*\e[0m] Exporting variables" ;} \
+|| { echo -e "[\e[31m*\e[0m] Exporting variables"; echo "Aborting..."; return 1; }
+
+export GENTOOKEY="$(lynx -dump ${SIGNING_KEY} |  grep "(4096-bit RSA)" | head -1 | awk -F '(' '{ print $1}')"
+export "GENTOOKEY"
+export GENTOOLATEST="$DIST/$(wget -q -O- "${DIST}/latest-stage3-$ARCH.txt" | tail -n 1 | awk -F ' ' '{ print $1 }')"
+STAGE3TB=$(wget -q -O- "${DIST}/latest-stage3-$ARCH.txt" | tail -n 1 | awk -F ' ' '{ print $1 }' | awk -F '/' '{ print $2 }')
+export GENTOOLATESTASC="$DIST/$(wget -q -O- "${DIST}/latest-stage3-$ARCH.txt" | tail -n 1 | awk -F ' ' '{ print $1 }').DIGESTS.asc"
+
+# PROMPT TO CONTINUE OR START ANEW
+if [[ "$(awk -F '=' '/KEY/{ print $2 }' <"${LOCALLG}/sinprog")" == 1 ]]; then
+while true; do
+clear; echo "Do you want to continue from last time?"
+read -p "Answer Yes or START NEW: " yn
+echo 
+case ${yn} in
+	[Yy][eE][sS]|[yY])
+		break;;
+	"START NEW")
+		# CHECK IF THE PSEUDOS ARE MOUNTED, ATTEMPT TO UNMOUNT AND BAILOUT IF UNABLE TO
+		[[ -n $(grep 'dist.d/stage3' /proc/mounts | awk -F ' ' '{ print $1 }') ]] \
+		&& { umount -l "${DISTDIR}/${STAGE3TB}"/* >/dev/null 2>&1 && sleep 2 \
+		&& umount -l "${DISTDIR}/${STAGE3TB}"/* >/dev/null 2>&1 \
+		&& [[ -z $(grep 'dist.d/stage3' /proc/mounts | awk -F ' ' '{ print $1 }') ]] && exit 1; }
+
+		# PURGE OLD WORK DIRECTORY. WORK DIRECTORY IS NOT WORKDIR
+		rm -rf "${DISTDIR}/${STAGE3TB}"
+		sinit_mon 5 && sed -i -e 's/1/0/g' "${WORKDIR}/scripts/chroot_scripts/chsinprog"; break;;
+	* ) echo "Wrong answer";;
+esac
+done
+fi
+
+# PART A FLOW CHECK
+[[ "$(awk -F '=' '/PARTA/{ print $2 }' <"${LOCALLG}/sinprog")" == 0 ]] \
+&& clear && echo "PART:A Required files" && sleep 2
+
+# FETCH THE KEYS FOR THE CRYPTOGRAPHIC AUTHENTICATION
+if [[ "$(awk -F '=' '/KEY/{ print $2 }' <"${LOCALLG}/sinprog")" == 0 ]]; then
+echo "Fetching Key"
+[[ -z "${GENTOOKEY}" ]] && print_inf 4 && return 1
+
+gpg --keyserver hkps.pool.sks-keyservers.net --recv-keys >/dev/null 2>&1 ${GENTOOKEY} \
+&& print_inf 1 || { print_inf 2; return 1; }
+sinit_mon 1
+fi
+unset KEY
+
+# DOWNLOAD THE LATEST STAGE3 TARBALL TO ACT AS THE CATALYST'S SEED S3T
+if [[ "$(awk -F '=' '/WGETST3/{ print $2 }' <"${LOCALLG}/sinprog")" == 0 ]]; then
+echo "Getting ${STAGE3TB}"
+[[ -z "${GENTOOLATEST}" || -z "${GENTOOLATESTASC}" ]] && print_inf 4 && return 1
+
+mkdir -p "${DISTDIR}/${STAGE3TB}" "${DISTDIR}/dists"
+
+if [[ ! -e "${DISTDIR}/dists/${STAGE3TB}" ]]; then
+wget -c --progress=dot -P "${DISTDIR}/dists" "${GENTOOLATEST}" \
+&& print_inf 1 || { print_inf 2; return 1; }
+fi
+
+echo "Getting ${GENTOOLATESTASC}"
+if [[ ! -e "${DISTDIR}/dists/${GENTOOLATESTASC}" ]]; then
+wget -c --progress=dot -P "${DISTDIR}/dists" "${GENTOOLATESTASC}" >/dev/null 2>&1 \
+&& echo -e "[\e[32m*\e[0m] Getting ${GENTOOLATEST}" \
+|| echo -e "[\e[31m*\e[0m] Getting ${GENTOOLATEST}"
+fi
+
+echo "Getting ${GENTOOLATEST}.DIGESTS"
+if [[ ! -e "${DISTDIR}/dists/${GENTOOLATEST}.DIGESTS" ]]; then
+wget -c --progress=dot -P "${DISTDIR}/dists" "${GENTOOLATEST}.DIGESTS" >/dev/null 2>&1 \
+&& echo -e "[\e[32m*\e[0m] Getting ${GENTOOLATEST}.DIGESTS" \
+|| echo -e "[\e[31m*\e[0m] Getting ${GENTOOLATEST}.DIGESTS"
+fi
+
+sinit_mon 2
+fi
+unset WGETST3
+
+# VERIFY THE AUTHENTICATION OF THE DOWNLOADED FILES
+if [[ "$(awk -F '=' '/VERIFICATION/{ print $2 }' <"${LOCALLG}/sinprog")" == 0 ]]; then
+gpg --verify "${DISTDIR}/dists/${STAGE3TB}.DIGESTS.asc" >/dev/null 2>&1 \
+&& echo -e "[\e[32m*\e[0m] Verifying the cryptographic signature" \
+|| echo -e "[\e[31m*\e[0m] Verifying the cryptographic signature"
+
+[[ $(grep -A 1 -i sha512 "${DISTDIR}/dists/${STAGE3TB}.DIGESTS.asc" | head -n 2 |grep stage3 | awk -F ' ' '{ print $1 }') \
+== $(sha512sum "${DISTDIR}/dists/${STAGE3TB}" |  awk -F ' ' '{ print $1 }') ]] && echo -e "[\e[32m*\e[0m] Verifying sha512sums" \
+|| echo -e "[\e[31m*\e[0m] Verifying sha512sums"
+sinit_mon 3
+fi
+unset VERIFICATION
+
+# CATALYST BEGINS HERE
+
+cp "${DISTDIR}/dists/${STAGE3TB}" "${DISTDIR}/dists/catalyst/builds/defaults/${GSE_VER}.tar.bz2"
+init_stage3_seq
+unset CATADIR
+unset CATPORTDIR
+unset CATPORTCACHEDIR
+unset CATLOGDIR
+unset CATDISTDIR
+# CATALYST ENDS HERE
+
+cp "${DISTDIR}/dists/catalyst/builds/defaults/stage3-${ARCH}-${GSE_VER}.tar.bz2"
+# Extract the tarball
+if [[ "$(awk -F '=' '/EXTRACTION/{ print $2 }' < "${LOCALLG}/sinprog")" == 0 ]]; then
+echo "Extracting tarball"
+if [[ "$(awk -F '=' '/CATALYST/{ print $2 }' < "${LOCALLG}/sinprog")" == 0 ]]; then
+tar xvjpf "${DISTDIR}/dists/catalyst/builds/defaults/stage3-${ARCH}-${GSE_VER}.tar.bz2" \
+-C "${DISTDIR}/${STAGE3TB}" --xattrs --numeric-owner && echo -e "[\e[32m*\e[0m] ALL GOOD" \
+|| echo -e "[\e[31m*\e[0m] AN ERROR OCCURRED"
+else
+tar xvjpf "${DISTDIR}/dists/${STAGE3TB}" -C "${DISTDIR}/${STAGE3TB}" --xattrs --numeric-owner \
+&& echo -e "[\e[32m*\e[0m] ALL GOOD" \
+|| echo -e "[\e[31m*\e[0m] AN ERROR OCCURRED"
+sinit_mon 4
+fi
+unset EXTRACTION
+
+
+[[ "$(awk -F '=' '/PARTB/{ print $2 }' <"${LOCALLG}/sinprog")" == 0 ]] \
+&& clear && echo "PART:B Preparing to enter the new system" && sleep 2
+
+# Root check function
+amiroot() {
+	if [[ "$1" != "0" ]]
+	then
+		echo "This operation requires root privileges"
+		echo "Returning back..."
+		sleep 2
+		BACKTO="MM"
+		return 1
+	fi
+	return 0
+}
+
+amiroot "$UID"
+sleep 1
+echo -e "[\e[32m*\e[0m] Requesting root privileges"
+
+cp -L /etc/resolv.conf "${DISTDIR}/${STAGE3TB}/etc/"
+
+# Check if mounted
+#cat /proc/mounts | grep 'dist.d/stage3' | awk -F ' ' '{ print $1 }'
+if [[ -n $(cat /proc/mounts | grep 'dist.d/stage3' | awk -F ' ' '{ print $1 }') ]]; then
+echo "Pseudos possibly mounted at target directory"
+umount -l "${DISTDIR}/${STAGE3TB}/dev" >/dev/null 2>&1
+umount -l "${DISTDIR}/${STAGE3TB}/proc" >/dev/null 2>&1
+umount -l "${DISTDIR}/${STAGE3TB}/sys" >/dev/null 2>&1
+umount -l "${DISTDIR}/${STAGE3TB}"/* >/dev/null 2>&1
+sleep 2
+fi
+
+echo "Mounting pseudo"
+[[ -z $(grep 'dist.d/stage3' /proc/mounts | awk -F ' ' '{ print $1 }') ]] \
+&& { mount -t proc /proc "${DISTDIR}/${STAGE3TB}/proc" \
+&& echo -e "[\e[32m*\e[0m] Mounting proc" \
+|| { echo -e "[\e[31m*\e[0m] Mounting proc"; return 1; }
+
+mount --rbind /dev "${DISTDIR}/${STAGE3TB}/dev" \
+&& mount --make-rslave "${DISTDIR}/${STAGE3TB}/dev" \
+&& echo -e "[\e[32m*\e[0m] Mounting dev" \
+|| { echo -e "[\e[321*\e[0m] Mounting dev"; return 1; }
+
+mount --rbind /sys "${DISTDIR}/${STAGE3TB}/sys" \
+&& mount --make-rslave "${DISTDIR}/${STAGE3TB}/sys" \
+&& echo -e "[\e[32m*\e[0m] Mounting sys" \
+|| { echo -e "[\e[321*\e[0m] Mounting sys"; return 1; }; }
+
+mkdir -p "${DISTDIR}/${STAGE3TB}/sinit.d"
+
+rsync -avhPr "${WORKDIR}/scripts/chroot_scripts/" "${DISTDIR}/${STAGE3TB}/sinit.d/" >/dev/null 2>&1 \
+&& rsync -a "${CONFDIR}/system/portage/make.conf" "${DISTDIR}/${STAGE3TB}/sinit.d/" >/dev/null 2>&1 \
+&& rsync -a "${CONFDIR}/system/portage/package.use/sysbuild" "${DISTDIR}/${STAGE3TB}/sinit.d/" >/dev/null 2>&1 \
+&& rsync -a --exclude="portage" "${CONFDIR}/system/" "${DISTDIR}/${STAGE3TB}/sinit.d/" >/dev/null 2>&1 \
+&& echo -e "[\e[32m*\e[0m] Copying required files to new system" \
+|| { echo -e "[\e[31m*\e[0m] Copying required files to new system"; return 1; }
+
+# Create repos.conf dir & copy repos.conf to it
+mkdir -p "${DISTDIR}/${STAGE3TB}/etc/portage/repos.conf"
+cp "${DISTDIR}/${STAGE3TB}/usr/share/portage/config/repos.conf" "${DISTDIR}/${STAGE3TB}/etc/portage/repos.conf/gentoo.conf"
+
+# Set local timezone if set
+if [[ -n $(cat /etc/timezone) ]]; then
+TIMEZONE=$(cat /etc/timezone)
+sed -i -e "s_TMZ_${TIMEZONE}_g" "${DISTDIR}/${STAGE3TB}/sinit.d/init.conf"
+unset TIMEZONE
+fi
+
+echo "Chrooting at new system"
+sleep 2
+chroot "${DISTDIR}/${STAGE3TB}" "sinit.d/chroot_init" || { echo -e "[\e[31m*\e[0m] Chrooting at new system"; return 1; }
+sinit_mon 6
+
+# TBU
+exit
+
+gpg --armor --export email > ${FINALDIST}/key.asc # THIS WILL BE ADDED TO THE HOSTS
+gpg --detach-sign -o ${GSE_VER}.gpg ${FINALDIST}/${IMAGE}
\ No newline at end of file