Index: mi/ChangeLog

2003-10-24  Andrew Cagney  <cagney@redhat.com>

	* tui-out.c: Fix "fortunatly"[sic].

Index: doc/ChangeLog
2003-10-24  Andrew Cagney  <cagney@redhat.com>

	* annotate.texinfo: Fix "fortunatly"[sic].

2003-10-24  Andrew Cagney  <cagney@redhat.com>

	* osabi.c (gdbarch_init_osabi): Fix typos, and "fortunatly"[sic].
	* PROBLEMS, arch-utils.c, cli-out.c, command.h: Ditto.
	* complaints.c, cris-tdep.c, disasm.c, dwarf2-frame.c: Ditto.
	* frame.c, frame.h, infcall.c, infcmd.c, infrun.c: Ditto.
	* kod.c, mips-tdep.c, regcache.c, regcache.h, remote.c: Ditto.

24 files changed, 54 insertions, 40 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 176863bfcdb..2d00a07fd6e 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,11 @@
 2003-10-24  Andrew Cagney  <cagney@redhat.com>
 
+	* osabi.c (gdbarch_init_osabi): Fix typos, and "fortunatly"[sic].
+	* PROBLEMS, arch-utils.c, cli-out.c, command.h: Ditto.
+	* complaints.c, cris-tdep.c, disasm.c, dwarf2-frame.c: Ditto.
+	* frame.c, frame.h, infcall.c, infcmd.c, infrun.c: Ditto.
+	* kod.c, mips-tdep.c, regcache.c, regcache.h, remote.c: Ditto.
+
 	* osabi.c (gdbarch_init_osabi): Add comment on 32-bit vs 64-bit.
 	(can_run_code_for): Use the OO term "singleton".
 
diff --git a/gdb/PROBLEMS b/gdb/PROBLEMS
index daecf3250fa..cf60d534ed1 100644
--- a/gdb/PROBLEMS
+++ b/gdb/PROBLEMS
@@ -19,7 +19,7 @@ arm-*-*
 GDB's ARM target, in 6.0, has not been updated to use the new frame
 mechanism.
 
-Fortunatly the ARM target, in the GDB's mainline sources, has been
+Fortunately the ARM target, in the GDB's mainline sources, has been
 updated so people encountering problems should consider downloading a
 more current GDB (http://www.gnu.org/software/gdb/current).
 
diff --git a/gdb/arch-utils.c b/gdb/arch-utils.c
index 5b7a71f478b..ca0f514a549 100644
--- a/gdb/arch-utils.c
+++ b/gdb/arch-utils.c
@@ -626,7 +626,7 @@ initialize_current_architecture (void)
 
 /* Initialize a gdbarch info to values that will be automatically
    overridden.  Note: Originally, this ``struct info'' was initialized
-   using memset(0).  Unfortunatly, that ran into problems, namely
+   using memset(0).  Unfortunately, that ran into problems, namely
    BFD_ENDIAN_BIG is zero.  An explicit initialization function that
    can explicitly set each field to a well defined value is used.  */
 
diff --git a/gdb/cli-out.c b/gdb/cli-out.c
index 2e5a3c16b16..9f48a0aa391 100644
--- a/gdb/cli-out.c
+++ b/gdb/cli-out.c
@@ -118,7 +118,7 @@ cli_table_begin (struct ui_out *uiout, int nbrofcols,
   if (nr_rows == 0)
     data->suppress_output = 1;
   else
-    /* Only the table suppresses the output and, fortunatly, a table
+    /* Only the table suppresses the output and, fortunately, a table
        is not a recursive data structure. */
     gdb_assert (data->suppress_output == 0);
 }
diff --git a/gdb/command.h b/gdb/command.h
index 9cadd63d24b..c4a5f20edd3 100644
--- a/gdb/command.h
+++ b/gdb/command.h
@@ -157,7 +157,7 @@ extern void execute_cmd_post_hook (struct cmd_list_element *cmd);
    the set command passed as a parameter.  The clone operation will
    include (BUG?) any ``set'' command callback, if present.  Commands
    like ``info set'' call all the ``show'' command callbacks.
-   Unfortunatly, for ``show'' commands cloned from ``set'', this
+   Unfortunately, for ``show'' commands cloned from ``set'', this
    includes callbacks belonging to ``set'' commands.  Making this
    worse, this only occures if add_show_from_set() is called after
    add_cmd_sfunc() (BUG?).  */
diff --git a/gdb/complaints.c b/gdb/complaints.c
index 252e654a993..ed24f432406 100644
--- a/gdb/complaints.c
+++ b/gdb/complaints.c
@@ -210,7 +210,7 @@ vcomplaint (struct complaints **c, const char *file, int line, const char *fmt,
              trailing newline, the wrap_here() is just a hint.  */
 	  if (series == ISOLATED_MESSAGE)
 	    /* It would be really nice to use begin_line() here.
-	       Unfortunatly that function doesn't track GDB_STDERR and
+	       Unfortunately that function doesn't track GDB_STDERR and
 	       consequently will sometimes supress a line when it
 	       shouldn't.  */
 	    fputs_filtered ("\n", gdb_stderr);
@@ -292,7 +292,7 @@ clear_complaints (struct complaints **c, int less_verbose, int noisy)
       break;
     case SUBSEQUENT_MESSAGE:
       /* It would be really nice to use begin_line() here.
-         Unfortunatly that function doesn't track GDB_STDERR and
+         Unfortunately that function doesn't track GDB_STDERR and
          consequently will sometimes supress a line when it shouldn't.  */
       fputs_unfiltered ("\n", gdb_stderr);
       break;
diff --git a/gdb/cris-tdep.c b/gdb/cris-tdep.c
index adb2e746017..6c5483b7055 100644
--- a/gdb/cris-tdep.c
+++ b/gdb/cris-tdep.c
@@ -3916,7 +3916,7 @@ cris_version_update (char *ignore_args, int from_tty,
      the set command passed as a parameter.  The clone operation will
      include (BUG?) any ``set'' command callback, if present.
      Commands like ``info set'' call all the ``show'' command
-     callbacks.  Unfortunatly, for ``show'' commands cloned from
+     callbacks.  Unfortunately, for ``show'' commands cloned from
      ``set'', this includes callbacks belonging to ``set'' commands.
      Making this worse, this only occures if add_show_from_set() is
      called after add_cmd_sfunc() (BUG?).  */
@@ -3943,7 +3943,7 @@ cris_mode_update (char *ignore_args, int from_tty,
      the set command passed as a parameter.  The clone operation will
      include (BUG?) any ``set'' command callback, if present.
      Commands like ``info set'' call all the ``show'' command
-     callbacks.  Unfortunatly, for ``show'' commands cloned from
+     callbacks.  Unfortunately, for ``show'' commands cloned from
      ``set'', this includes callbacks belonging to ``set'' commands.
      Making this worse, this only occures if add_show_from_set() is
      called after add_cmd_sfunc() (BUG?).  */
@@ -3970,7 +3970,7 @@ cris_abi_update (char *ignore_args, int from_tty,
      the set command passed as a parameter.  The clone operation will
      include (BUG?) any ``set'' command callback, if present.
      Commands like ``info set'' call all the ``show'' command
-     callbacks.  Unfortunatly, for ``show'' commands cloned from
+     callbacks.  Unfortunately, for ``show'' commands cloned from
      ``set'', this includes callbacks belonging to ``set'' commands.
      Making this worse, this only occures if add_show_from_set() is
      called after add_cmd_sfunc() (BUG?).  */
diff --git a/gdb/disasm.c b/gdb/disasm.c
index 5f4d07a0aea..20d0ab3404b 100644
--- a/gdb/disasm.c
+++ b/gdb/disasm.c
@@ -337,7 +337,7 @@ gdb_disassemble_info (struct gdbarch *gdbarch, struct ui_file *file)
   /* NOTE: cagney/2003-04-28: The original code, from the old Insight
      disassembler had a local optomization here.  By default it would
      access the executable file, instead of the target memory (there
-     was a growing list of exceptions though).  Unfortunatly, the
+     was a growing list of exceptions though).  Unfortunately, the
      heuristic was flawed.  Commands like "disassemble &variable"
      didn't work as they relied on the access going to the target.
      Further, it has been supperseeded by trust-read-only-sections
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 7e24d8248b6..2e72df77c15 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,7 @@
+2003-10-24  Andrew Cagney  <cagney@redhat.com>
+
+	* annotate.texinfo: Fix "fortunatly"[sic].
+
 2003-10-23  Kei Sakamoto  <sakamoto.kei@renesas.com>
 
 	* gdb.texinfo (Contributors to GDB): Replace "Renesas"
diff --git a/gdb/doc/annotate.texinfo b/gdb/doc/annotate.texinfo
index 401657d4a96..831d3cac996 100644
--- a/gdb/doc/annotate.texinfo
+++ b/gdb/doc/annotate.texinfo
@@ -146,7 +146,7 @@ This chapter discusses the known problems.
 @section Dependant on @sc{cli} output
 
 The annotation interface works by interspersing markups with
-@value{GDBN} normal command-line interpreter output.  Unfortunatly, this
+@value{GDBN} normal command-line interpreter output.  Unfortunately, this
 makes the annotation client dependant on not just the annotations, but
 also the @sc{cli} output.  This is because the client is forced to
 assume that specific @value{GDBN} commands provide specific information.
diff --git a/gdb/dwarf2-frame.c b/gdb/dwarf2-frame.c
index b46a3823760..f97a5909454 100644
--- a/gdb/dwarf2-frame.c
+++ b/gdb/dwarf2-frame.c
@@ -770,7 +770,7 @@ dwarf2_frame_prev_register (struct frame_info *next_frame, void **this_cache,
              either a register and a signed offset that are added
              together or a DWARF expression that is evaluated.  */
 	  /* NOTE: cagney/2003-09-05: Should issue a complain.
-             Unfortunatly it turns out that DWARF2 CFI has a problem.
+             Unfortunately it turns out that DWARF2 CFI has a problem.
              Since CFI specifies the location at which a register was
              saved (not its value) it isn't possible to specify
              something like "unwound(REG) == REG + constant" using CFI
diff --git a/gdb/frame.c b/gdb/frame.c
index 3a4b7091f12..a405a6b736b 100644
--- a/gdb/frame.c
+++ b/gdb/frame.c
@@ -65,7 +65,7 @@ struct frame_info
 
   /* The frame's type.  */
   /* FIXME: cagney/2003-04-02: Should instead be returning
-     ->unwind->type.  Unfortunatly, legacy code is still explicitly
+     ->unwind->type.  Unfortunately, legacy code is still explicitly
      setting the type using the method deprecated_set_frame_type.
      Eliminate that method and this field can be eliminated.  */
   enum frame_type type;
@@ -235,7 +235,7 @@ get_frame_id (struct frame_info *fi)
 	  fi->unwind = frame_unwind_find_by_frame (fi->next);
 	  /* FIXME: cagney/2003-04-02: Rather than storing the frame's
 	     type in the frame, the unwinder's type should be returned
-	     directly.  Unfortunatly, legacy code, called by
+	     directly.  Unfortunately, legacy code, called by
 	     legacy_get_prev_frame, explicitly set the frames type
 	     using the method deprecated_set_frame_type().  */
 	  gdb_assert (fi->unwind->type != UNKNOWN_FRAME);
@@ -492,7 +492,7 @@ frame_pop (struct frame_info *this_frame)
          burst register transfer and that the sequence of register
          writes should be batched.  The pair target_prepare_to_store()
          and target_store_registers() kind of suggest this
-         functionality.  Unfortunatly, they don't implement it.  Their
+         functionality.  Unfortunately, they don't implement it.  Their
          lack of a formal definition can lead to targets writing back
          bogus values (arguably a bug in the target code mind).  */
       /* Now copy those saved registers into the current regcache.
@@ -539,7 +539,7 @@ frame_register_unwind (struct frame_info *frame, int regnum,
       frame->unwind = frame_unwind_find_by_frame (frame->next);
       /* FIXME: cagney/2003-04-02: Rather than storing the frame's
 	 type in the frame, the unwinder's type should be returned
-	 directly.  Unfortunatly, legacy code, called by
+	 directly.  Unfortunately, legacy code, called by
 	 legacy_get_prev_frame, explicitly set the frames type using
 	 the method deprecated_set_frame_type().  */
       gdb_assert (frame->unwind->type != UNKNOWN_FRAME);
@@ -953,7 +953,7 @@ legacy_saved_regs_prev_register (struct frame_info *next_frame,
 				 int *realnump, void *bufferp)
 {
   /* HACK: New code is passed the next frame and this cache.
-     Unfortunatly, old code expects this frame.  Since this is a
+     Unfortunately, old code expects this frame.  Since this is a
      backward compatibility hack, cheat by walking one level along the
      prologue chain to the frame the old code expects.
 
@@ -1309,7 +1309,7 @@ legacy_get_prev_frame (struct frame_info *this_frame)
      DEPRECATED_INIT_FRAME_PC_FIRST and
      DEPRECATED_FRAME_INIT_SAVED_REGS methods are full of work-arounds
      that handle the frame not being correctly set from the start.
-     Unfortunatly those same work-arounds rely on the type defaulting
+     Unfortunately those same work-arounds rely on the type defaulting
      to NORMAL_FRAME.  Ulgh!  The new frame code does not have this
      problem.  */
   prev->type = UNKNOWN_FRAME;
@@ -1419,7 +1419,7 @@ legacy_get_prev_frame (struct frame_info *this_frame)
       /* FIXME: cagney/2002-01-19: This call will go away.  Instead of
 	 initializing extra info, all frames will use the frame_cache
 	 (passed to the unwind functions) to store additional frame
-	 info.  Unfortunatly legacy targets can't use
+	 info.  Unfortunately legacy targets can't use
 	 legacy_get_prev_frame() to unwind the sentinel frame and,
 	 consequently, are forced to take this code path and rely on
 	 the below call to DEPRECATED_INIT_EXTRA_FRAME_INFO to
@@ -1506,7 +1506,7 @@ legacy_get_prev_frame (struct frame_info *this_frame)
 	  prev->unwind = frame_unwind_find_by_frame (this_frame->next);
 	  /* FIXME: cagney/2003-04-02: Rather than storing the frame's
 	     type in the frame, the unwinder's type should be returned
-	     directly.  Unfortunatly, legacy code, called by
+	     directly.  Unfortunately, legacy code, called by
 	     legacy_get_prev_frame, explicitly set the frames type
 	     using the method deprecated_set_frame_type().  */
 	  prev->type = prev->unwind->type;
@@ -2159,7 +2159,7 @@ get_frame_type (struct frame_info *frame)
       frame->unwind = frame_unwind_find_by_frame (frame->next);
       /* FIXME: cagney/2003-04-02: Rather than storing the frame's
 	 type in the frame, the unwinder's type should be returned
-	 directly.  Unfortunatly, legacy code, called by
+	 directly.  Unfortunately, legacy code, called by
 	 legacy_get_prev_frame, explicitly set the frames type using
 	 the method deprecated_set_frame_type().  */
       gdb_assert (frame->unwind->type != UNKNOWN_FRAME);
diff --git a/gdb/frame.h b/gdb/frame.h
index 81f07eb1772..30d69697a1a 100644
--- a/gdb/frame.h
+++ b/gdb/frame.h
@@ -629,7 +629,7 @@ extern void return_command (char *, int);
    You might think that the below global can simply be replaced by a
    call to either get_selected_frame() or select_frame().
 
-   Unfortunatly, it isn't that easy.
+   Unfortunately, it isn't that easy.
 
    The relevant code needs to be audited to determine if it is
    possible (or pratical) to instead pass the applicable frame in as a
diff --git a/gdb/infcall.c b/gdb/infcall.c
index 75c7f4e2ee3..7695c6ab679 100644
--- a/gdb/infcall.c
+++ b/gdb/infcall.c
@@ -909,7 +909,7 @@ You must use a pointer to function type variable. Command ignored.", arg_name);
     else
       {
 	/* The assumption here is that push_dummy_call() returned the
-	   stack part of the frame ID.  Unfortunatly, many older
+	   stack part of the frame ID.  Unfortunately, many older
 	   architectures were, via a convoluted mess, relying on the
 	   poorly defined and greatly overloaded
 	   DEPRECATED_TARGET_READ_FP or DEPRECATED_FP_REGNUM to supply
diff --git a/gdb/infcmd.c b/gdb/infcmd.c
index 9287f031e98..a7e0e157dc4 100644
--- a/gdb/infcmd.c
+++ b/gdb/infcmd.c
@@ -1127,7 +1127,7 @@ print_return_value (int structure_return, struct type *value_type)
 	{
 	  /* It is "struct return" yet the value is being extracted,
              presumably from registers, using EXTRACT_RETURN_VALUE.
-             This doesn't make sense.  Unfortunatly, the legacy
+             This doesn't make sense.  Unfortunately, the legacy
              interfaces allowed this behavior.  Sigh!  */
 	  value = allocate_value (value_type);
 	  CHECK_TYPEDEF (value_type);
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 7412080ba35..3a8e1216321 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -519,7 +519,7 @@ set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
      the set command passed as a parameter.  The clone operation will
      include (BUG?) any ``set'' command callback, if present.
      Commands like ``info set'' call all the ``show'' command
-     callbacks.  Unfortunatly, for ``show'' commands cloned from
+     callbacks.  Unfortunately, for ``show'' commands cloned from
      ``set'', this includes callbacks belonging to ``set'' commands.
      Making this worse, this only occures if add_show_from_set() is
      called after add_cmd_sfunc() (BUG?).  */
@@ -2650,7 +2650,7 @@ process_event_stop_test:
        stepped out of a function;
      /* Of course this assumes that the frame ID unwind code is robust
         and we're willing to introduce frame unwind logic into this
-        function.  Fortunatly, those days are nearly upon us.  */
+        function.  Fortunately, those days are nearly upon us.  */
 #endif
   {
     struct frame_id current_frame = get_frame_id (get_current_frame ());
@@ -2807,7 +2807,7 @@ step_over_function (struct execution_control_state *ecs)
      - avoid handling the case where the PC hasn't been saved in the
      prologue analyzer
 
-     Unfortunatly, not five lines further down, is a call to
+     Unfortunately, not five lines further down, is a call to
      get_frame_id() and that is guarenteed to trigger the prologue
      analyzer.
      
diff --git a/gdb/kod.c b/gdb/kod.c
index e2bae913384..6cb3622f87a 100644
--- a/gdb/kod.c
+++ b/gdb/kod.c
@@ -138,7 +138,7 @@ kod_set_os (char *arg, int from_tty, struct cmd_list_element *command)
      the set command passed as a parameter.  The clone operation will
      include (BUG?) any ``set'' command callback, if present.
      Commands like ``info set'' call all the ``show'' command
-     callbacks.  Unfortunatly, for ``show'' commands cloned from
+     callbacks.  Unfortunately, for ``show'' commands cloned from
      ``set'', this includes callbacks belonging to ``set'' commands.
      Making this worse, this only occures if add_show_from_set() is
      called after add_cmd_sfunc() (BUG?).  */
diff --git a/gdb/mi/ChangeLog b/gdb/mi/ChangeLog
index 9a88e2f8635..cb1ca52d597 100644
--- a/gdb/mi/ChangeLog
+++ b/gdb/mi/ChangeLog
@@ -1,3 +1,7 @@
+2003-10-24  Andrew Cagney  <cagney@redhat.com>
+
+	* tui-out.c: Fix "fortunatly"[sic].
+
 2003-10-02  Andrew Cagney  <cagney@redhat.com>
 
 	* mi-main.c: Rename REGISTER_RAW_SIZE to
diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c
index 4440e113c0a..40d8cb421d1 100644
--- a/gdb/mips-tdep.c
+++ b/gdb/mips-tdep.c
@@ -679,7 +679,7 @@ mips_register_raw_size (int regnum)
 /* Register offset in a buffer for each register.
 
    FIXME: cagney/2003-06-15: This is so bogus.  Instead REGISTER_TYPE
-   should strictly return the layout of the buffer.  Unfortunatly
+   should strictly return the layout of the buffer.  Unfortunately
    remote.c and the MIPS have come to rely on a custom layout that
    doesn't 1:1 map onto the register type.  */
 
@@ -1741,7 +1741,7 @@ mips_find_saved_regs (struct frame_info *fci)
 	         stored first leading to the memory order $f[N] and
 	         then $f[N+1].
 
-		 Unfortunatly, when big-endian the most significant
+		 Unfortunately, when big-endian the most significant
 		 part of the double is stored first, and the least
 		 significant is stored second.  This leads to the
 		 registers being ordered in memory as firt $f[N+1] and
diff --git a/gdb/osabi.c b/gdb/osabi.c
index fc712a61ffc..4ebed2501d8 100644
--- a/gdb/osabi.c
+++ b/gdb/osabi.c
@@ -337,10 +337,10 @@ gdbarch_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch)
          is implemented using BFD's compatible method (a->compatible
          (b) == a -- the lowest common denominator between a and b is
          a).  That method's definition of compatible may not be as you
-         expect.  For instance, while "amd64 can run code for i386"
+         expect.  For instance the test "amd64 can run code for i386"
          (or more generally "64-bit ISA can run code for the 32-bit
-         ISA").  Fortunatly, BFD doesn't normally consider 32-bit and
-         64-bit "compatible" so won't get a match.  */
+         ISA").  BFD doesn't normally consider 32-bit and 64-bit
+         "compatible" so it doesn't succeed.  */
       if (can_run_code_for (arch_info, handler->arch_info))
 	{
 	  (*handler->init_osabi) (info, gdbarch);
diff --git a/gdb/regcache.c b/gdb/regcache.c
index ccb4e8064bb..62c0de516f0 100644
--- a/gdb/regcache.c
+++ b/gdb/regcache.c
@@ -107,7 +107,7 @@ init_legacy_regcache_descr (struct gdbarch *gdbarch,
   for (i = 0; i < descr->nr_cooked_registers; i++)
     {
       /* FIXME: cagney/2001-12-04: This code shouldn't need to use
-         DEPRECATED_REGISTER_BYTE().  Unfortunatly, legacy code likes
+         DEPRECATED_REGISTER_BYTE().  Unfortunately, legacy code likes
          to lay the buffer out so that certain registers just happen
          to overlap.  Ulgh!  New targets use gdbarch's register
          read/write and entirely avoid this uglyness.  */
@@ -138,7 +138,7 @@ init_legacy_regcache_descr (struct gdbarch *gdbarch,
 	descr->sizeof_cooked_registers = regend;
     }
   /* FIXME: cagney/2002-05-11: Shouldn't be including pseudo-registers
-     in the register cache.  Unfortunatly some architectures still
+     in the register cache.  Unfortunately some architectures still
      rely on this and the pseudo_register_write() method.  */
   descr->sizeof_raw_registers = descr->sizeof_cooked_registers;
 }
@@ -229,7 +229,7 @@ init_regcache_descr (struct gdbarch *gdbarch)
   }
 
   /* FIXME: cagney/2002-05-22: Should only need to allocate space for
-     the raw registers.  Unfortunatly some code still accesses the
+     the raw registers.  Unfortunately some code still accesses the
      register array directly using the global registers[].  Until that
      code has been purged, play safe and over allocating the register
      buffer.  Ulgh!  */
diff --git a/gdb/regcache.h b/gdb/regcache.h
index 9a341c32dcd..26a1b8a38e3 100644
--- a/gdb/regcache.h
+++ b/gdb/regcache.h
@@ -140,7 +140,7 @@ extern struct type *register_type (struct gdbarch *gdbarch, int regnum);
 
    FIXME: cagney/2003-02-28:
 
-   Unfortunatly, thanks to some legacy architectures, this doesn't
+   Unfortunately, thanks to some legacy architectures, this doesn't
    hold.  A register's cooked (nee virtual) and raw size can differ
    (see MIPS).  Such architectures should be using different register
    numbers for the different sized views of identical registers.
diff --git a/gdb/remote.c b/gdb/remote.c
index fc25c614530..4b0ff1beb26 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -204,7 +204,7 @@ void _initialize_remote (void);
 /* Description of the remote protocol.  Strictly speaking, when the
    target is open()ed, remote.c should create a per-target description
    of the remote protocol using that target's architecture.
-   Unfortunatly, the target stack doesn't include local state.  For
+   Unfortunately, the target stack doesn't include local state.  For
    the moment keep the information in the target's architecture
    object.  Sigh..  */
 
@@ -2365,7 +2365,7 @@ remote_open_1 (char *name, int from_tty, struct target_ops *target,
 
      FIXME: cagney/2002-05-19: Instead of re-throwing the exception,
      this function should return an error indication letting the
-     caller restore the previous state.  Unfortunatly the command
+     caller restore the previous state.  Unfortunately the command
      ``target remote'' is directly wired to this function making that
      impossible.  On a positive note, the CLI side of this problem has
      been fixed - the function set_cmd_context() makes it possible for
diff --git a/gdb/tui/tui-out.c b/gdb/tui/tui-out.c
index e1be56a6b00..1c2af689044 100644
--- a/gdb/tui/tui-out.c
+++ b/gdb/tui/tui-out.c
@@ -119,7 +119,7 @@ tui_table_begin (struct ui_out *uiout, int nbrofcols,
   if (nr_rows == 0)
     data->suppress_output = 1;
   else
-    /* Only the table suppresses the output and, fortunatly, a table
+    /* Only the table suppresses the output and, fortunately, a table
        is not a recursive data structure. */
     gdb_assert (data->suppress_output == 0);
 }