diff options
Diffstat (limited to 'net-analyzer/zabbix/files/2.4/zabbix_proxy.conf')
| -rw-r--r-- | net-analyzer/zabbix/files/2.4/zabbix_proxy.conf | 519 |
1 files changed, 519 insertions, 0 deletions
diff --git a/net-analyzer/zabbix/files/2.4/zabbix_proxy.conf b/net-analyzer/zabbix/files/2.4/zabbix_proxy.conf new file mode 100644 index 0000000..d4bae2e --- /dev/null +++ b/net-analyzer/zabbix/files/2.4/zabbix_proxy.conf @@ -0,0 +1,519 @@ +# This is a configuration file for Zabbix Proxy process +# To get more information about Zabbix, +# visit http://www.zabbix.com + +############ GENERAL PARAMETERS ################# + +### Option: ProxyMode +# Proxy operating mode +# 0 - proxy in the active mode +# 1 - proxy in the passive mode +# +# Mandatory: no +# Default: +# ProxyMode=0 + +### Option: Server +# IP address (or hostname) of Zabbix server. +# Active proxy will get configuration data from the server. +# For a proxy in the passive mode this parameter will be ignored. +# +# Mandatory: yes (if ProxyMode is set to 0) +# Default: +# Server= + +Server=127.0.0.1 + +### Option: ServerPort +# Port of Zabbix trapper on Zabbix server. +# For a proxy in the passive mode this parameter will be ignored. +# +# Mandatory: no +# Range: 1024-32767 +# Default: +# ServerPort=10051 + +### Option: Hostname +# Unique, case sensitive Proxy name. Make sure the Proxy name is known to the server! +# Value is acquired from HostnameItem if undefined. +# +# Mandatory: no +# Default: +# Hostname= + +Hostname=Zabbix proxy + +### Option: HostnameItem +# Item used for generating Hostname if it is undefined. +# Ignored if Hostname is defined. +# +# Mandatory: no +# Default: +# HostnameItem=system.hostname + +### Option: ListenPort +# Listen port for trapper. +# +# Mandatory: no +# Range: 1024-32767 +# Default: +# ListenPort=10051 + +### Option: SourceIP +# Source IP address for outgoing connections. +# +# Mandatory: no +# Default: +# SourceIP= + +### Option: LogFile +# Name of log file. +# If not set, syslog is used. +# +# Mandatory: no +# Default: +# LogFile= + +LogFile=/var/log/zabbix/zabbix_proxy.log + +### Option: LogFileSize +# Maximum size of log file in MB. +# 0 - disable automatic log rotation. +# +# Mandatory: no +# Range: 0-1024 +# Default: +LogFileSize=128 + +### Option: DebugLevel +# Specifies debug level +# 0 - no debug +# 1 - critical information +# 2 - error information +# 3 - warnings +# 4 - for debugging (produces lots of information) +# +# Mandatory: no +# Range: 0-4 +# Default: +# DebugLevel=3 + +### Option: PidFile +# Name of PID file. +# +# Mandatory: no +# Default: +PidFile=/run/zabbix/zabbix_proxy.pid + +### Option: DBHost +# Database host name. +# If set to localhost, socket is used for MySQL. +# If set to empty string, socket is used for PostgreSQL. +# +# Mandatory: no +# Default: +# DBHost=localhost + +### Option: DBName +# Database name. +# For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored. +# Warning: do not attempt to use the same database Zabbix server is using. +# +# Mandatory: yes +# Default: +# DBName= + +DBName=zabbix_proxy + +### Option: DBSchema +# Schema name. Used for IBM DB2. +# +# Mandatory: no +# Default: +# DBSchema= + +### Option: DBUser +# Database user. Ignored for SQLite. +# +# Default: +# DBUser= + +DBUser=root + +### Option: DBPassword +# Database password. Ignored for SQLite. +# Comment this line if no password is used. +# +# Mandatory: no +# Default: +# DBPassword= + +### Option: DBSocket +# Path to MySQL socket. +# +# Mandatory: no +# Default: +# DBSocket=/tmp/mysql.sock + +# Option: DBPort +# Database port when not using local socket. Ignored for SQLite. +# +# Mandatory: no +# Default (for MySQL): +# DBPort=3306 + +######### PROXY SPECIFIC PARAMETERS ############# + +### Option: ProxyLocalBuffer +# Proxy will keep data locally for N hours, even if the data have already been synced with the server. +# This parameter may be used if local data will be used by third party applications. +# +# Mandatory: no +# Range: 0-720 +# Default: +# ProxyLocalBuffer=0 + +### Option: ProxyOfflineBuffer +# Proxy will keep data for N hours in case if no connectivity with Zabbix Server. +# Older data will be lost. +# +# Mandatory: no +# Range: 1-720 +# Default: +# ProxyOfflineBuffer=1 + +### Option: HeartbeatFrequency +# Frequency of heartbeat messages in seconds. +# Used for monitoring availability of Proxy on server side. +# 0 - heartbeat messages disabled. +# For a proxy in the passive mode this parameter will be ignored. +# +# Mandatory: no +# Range: 0-3600 +# Default: +# HeartbeatFrequency=60 + +### Option: ConfigFrequency +# How often proxy retrieves configuration data from Zabbix Server in seconds. +# For a proxy in the passive mode this parameter will be ignored. +# +# Mandatory: no +# Range: 1-3600*24*7 +# Default: +# ConfigFrequency=3600 + +### Option: DataSenderFrequency +# Proxy will send collected data to the Server every N seconds. +# For a proxy in the passive mode this parameter will be ignored. +# +# Mandatory: no +# Range: 1-3600 +# Default: +# DataSenderFrequency=1 + +############ ADVANCED PARAMETERS ################ + +### Option: StartPollers +# Number of pre-forked instances of pollers. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartPollers=5 + +### Option: StartIPMIPollers +# Number of pre-forked instances of IPMI pollers. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartIPMIPollers=0 + +### Option: StartPollersUnreachable +# Number of pre-forked instances of pollers for unreachable hosts (including IPMI). +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartPollersUnreachable=1 + +### Option: StartTrappers +# Number of pre-forked instances of trappers. +# Trappers accept incoming connections from Zabbix sender and active agents. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartTrappers=5 + +### Option: StartPingers +# Number of pre-forked instances of ICMP pingers. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartPingers=1 + +### Option: StartDiscoverers +# Number of pre-forked instances of discoverers. +# +# Mandatory: no +# Range: 0-250 +# Default: +# StartDiscoverers=1 + +### Option: StartHTTPPollers +# Number of pre-forked instances of HTTP pollers. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartHTTPPollers=1 + +### Option: JavaGateway +# IP address (or hostname) of Zabbix Java gateway. +# Only required if Java pollers are started. +# +# Mandatory: no +# Default: +# JavaGateway= + +### Option: JavaGatewayPort +# Port that Zabbix Java gateway listens on. +# +# Mandatory: no +# Range: 1024-32767 +# Default: +# JavaGatewayPort=10052 + +### Option: StartJavaPollers +# Number of pre-forked instances of Java pollers. +# +# Mandatory: no +# Range: 0-1000 +# Default: +# StartJavaPollers=0 + +### Option: StartVMwareCollectors +# Number of pre-forked vmware collector instances. +# +# Mandatory: no +# Range: 0-250 +# Default: +# StartVMwareCollectors=0 + +### Option: VMwareFrequency +# How often Zabbix will connect to VMware service to obtain a new data. +# +# Mandatory: no +# Range: 10-86400 +# Default: +# VMwareFrequency=60 + +### Option: VMwareCacheSize +# Size of VMware cache, in bytes. +# Shared memory size for storing VMware data. +# Only used if VMware collectors are started. +# +# Mandatory: no +# Range: 256K-2G +# Default: +# VMwareCacheSize=8M + +### Option: SNMPTrapperFile +# Temporary file used for passing data from SNMP trap daemon to the proxy. +# Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file. +# +# Mandatory: no +# Default: +# SNMPTrapperFile=/tmp/zabbix_traps.tmp + +### Option: StartSNMPTrapper +# If 1, SNMP trapper process is started. +# +# Mandatory: no +# Range: 0-1 +# Default: +# StartSNMPTrapper=0 + +### Option: ListenIP +# List of comma delimited IP addresses that the trapper should listen on. +# Trapper will listen on all network interfaces if this parameter is missing. +# +# Mandatory: no +# Default: +# ListenIP=0.0.0.0 + +### Option: HousekeepingFrequency +# How often Zabbix will perform housekeeping procedure (in hours). +# Housekeeping is removing unnecessary information from history, alert, and alarms tables. +# +# Mandatory: no +# Range: 1-24 +# Default: +# HousekeepingFrequency=1 + +### Option: CacheSize +# Size of configuration cache, in bytes. +# Shared memory size, for storing hosts and items data. +# +# Mandatory: no +# Range: 128K-2G +# Default: +# CacheSize=8M + +### Option: StartDBSyncers +# Number of pre-forked instances of DB Syncers +# +# Mandatory: no +# Range: 1-100 +# Default: +# StartDBSyncers=4 + +### Option: HistoryCacheSize +# Size of history cache, in bytes. +# Shared memory size for storing history data. +# +# Mandatory: no +# Range: 128K-2G +# Default: +# HistoryCacheSize=8M + +### Option: HistoryTextCacheSize +# Size of text history cache, in bytes. +# Shared memory size for storing character, text or log history data. +# +# Mandatory: no +# Range: 128K-2G +# Default: +# HistoryTextCacheSize=16M + +### Option: Timeout +# Specifies how long we wait for agent, SNMP device or external check (in seconds). +# +# Mandatory: no +# Range: 1-30 +# Default: +# Timeout=3 + +### Option: TrapperTimeout +# Specifies how many seconds trapper may spend processing new data. +# +# Mandatory: no +# Range: 1-300 +# Default: +# TrapperTimeout=300 + +### Option: UnreachablePeriod +# After how many seconds of unreachability treat a host as unavailable. +# +# Mandatory: no +# Range: 1-3600 +# Default: +# UnreachablePeriod=45 + +### Option: UnavailableDelay +# How often host is checked for availability during the unavailability period, in seconds. +# +# Mandatory: no +# Range: 1-3600 +# Default: +# UnavailableDelay=60 + +### Option: UnreachableDelay +# How often host is checked for availability during the unreachability period, in seconds. +# +# Mandatory: no +# Range: 1-3600 +# Default: +# UnreachableDelay=15 + +### Option: ExternalScripts +# Full path to location of external scripts. +# Default depends on compilation options. +# +# Mandatory: no +# Default: +# ExternalScripts=${datadir}/zabbix/externalscripts + +### Option: FpingLocation +# Location of fping. +# Make sure that fping binary has root ownership and SUID flag set. +# +# Mandatory: no +# Default: +# FpingLocation=/usr/sbin/fping + +### Option: Fping6Location +# Location of fping6. +# Make sure that fping6 binary has root ownership and SUID flag set. +# Make empty if your fping utility is capable to process IPv6 addresses. +# +# Mandatory: no +# Default: +# Fping6Location=/usr/sbin/fping6 + +### Option: SSHKeyLocation +# Location of public and private keys for SSH checks and actions. +# +# Mandatory: no +# Default: +# SSHKeyLocation= + +### Option: LogSlowQueries +# How long a database query may take before being logged (in milliseconds). +# Only works if DebugLevel set to 3 or 4. +# 0 - don't log slow queries. +# +# Mandatory: no +# Range: 1-3600000 +# Default: +# LogSlowQueries=0 + +### Option: TmpDir +# Temporary directory. +# +# Mandatory: no +# Default: +# TmpDir=/tmp + +### Option: AllowRoot +# Allow the proxy to run as 'root'. If disabled and the proxy is started by 'root', the proxy +# will try to switch to user 'zabbix' instead. Has no effect if started under a regular user. +# 0 - do not allow +# 1 - allow +# +# Mandatory: no +# Default: +# AllowRoot=0 + +### Option: Include +# You may include individual files or all files in a directory in the configuration file. +# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. +# +# Mandatory: no +# Default: +# Include= + +# Include=/usr/local/etc/zabbix_proxy.general.conf +# Include=/usr/local/etc/zabbix_proxy.conf.d/ + +####### LOADABLE MODULES ####### + +### Option: LoadModulePath +# Full path to location of proxy modules. +# Default depends on compilation options. +# +# Mandatory: no +# Default: +# LoadModulePath=${libdir}/modules + +### Option: LoadModule +# Module to load at proxy startup. Modules are used to extend functionality of the proxy. +# Format: LoadModule=<module.so> +# The modules must be located in directory specified by LoadModulePath. +# It is allowed to include multiple LoadModule parameters. +# +# Mandatory: no +# Default: +# LoadModule= |