diff options
Diffstat (limited to 'net-analyzer/zabbix/files/2.4/zabbix_agentd.conf')
| -rw-r--r-- | net-analyzer/zabbix/files/2.4/zabbix_agentd.conf | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/net-analyzer/zabbix/files/2.4/zabbix_agentd.conf b/net-analyzer/zabbix/files/2.4/zabbix_agentd.conf new file mode 100644 index 0000000..4d49d36 --- /dev/null +++ b/net-analyzer/zabbix/files/2.4/zabbix_agentd.conf @@ -0,0 +1,278 @@ +# This is a config file for the Zabbix agent daemon (Unix) +# To get more information about Zabbix, visit http://www.zabbix.com + +############ GENERAL PARAMETERS ################# + +### Option: PidFile +# Name of PID file. +# +# Mandatory: no +# Default: +PidFile=/run/zabbix/zabbix_agentd.pid + +### Option: LogFile +# Name of log file. +# If not set, syslog is used. +# +# Mandatory: no +# Default: +# LogFile= + +LogFile=/var/log/zabbix/zabbix_agentd.log + +### Option: LogFileSize +# Maximum size of log file in MB. +# 0 - disable automatic log rotation. +# +# Mandatory: no +# Range: 0-1024 +# Default: +LogFileSize=128 + +### Option: DebugLevel +# Specifies debug level +# 0 - no debug +# 1 - critical information +# 2 - error information +# 3 - warnings +# 4 - for debugging (produces lots of information) +# +# Mandatory: no +# Range: 0-4 +# Default: +# DebugLevel=3 + +### Option: SourceIP +# Source IP address for outgoing connections. +# +# Mandatory: no +# Default: +# SourceIP= + +### Option: EnableRemoteCommands +# Whether remote commands from Zabbix server are allowed. +# 0 - not allowed +# 1 - allowed +# +# Mandatory: no +# Default: +# EnableRemoteCommands=0 + +### Option: LogRemoteCommands +# Enable logging of executed shell commands as warnings. +# 0 - disabled +# 1 - enabled +# +# Mandatory: no +# Default: +# LogRemoteCommands=0 + +##### Passive checks related + +### Option: Server +# List of comma delimited IP addresses (or hostnames) of Zabbix servers. +# Incoming connections will be accepted only from the hosts listed here. +# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally. +# +# Mandatory: no +# Default: +# Server= + +Server=127.0.0.1 + +### Option: ListenPort +# Agent will listen on this port for connections from the server. +# +# Mandatory: no +# Range: 1024-32767 +# Default: +# ListenPort=10050 + +### Option: ListenIP +# List of comma delimited IP addresses that the agent should listen on. +# First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks. +# +# Mandatory: no +# Default: +# ListenIP=0.0.0.0 + +### Option: StartAgents +# Number of pre-forked instances of zabbix_agentd that process passive checks. +# If set to 0, disables passive checks and the agent will not listen on any TCP port. +# +# Mandatory: no +# Range: 0-100 +# Default: +# StartAgents=3 + +##### Active checks related + +### Option: ServerActive +# List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks. +# If port is not specified, default port is used. +# IPv6 addresses must be enclosed in square brackets if port for that host is specified. +# If port is not specified, square brackets for IPv6 addresses are optional. +# If this parameter is not specified, active checks are disabled. +# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1] +# +# Mandatory: no +# Default: +# ServerActive= + +ServerActive=127.0.0.1 + +### Option: Hostname +# Unique, case sensitive hostname. +# Required for active checks and must match hostname as configured on the server. +# Value is acquired from HostnameItem if undefined. +# +# Mandatory: no +# Default: +# Hostname= + +Hostname=Zabbix server + +### Option: HostnameItem +# Item used for generating Hostname if it is undefined. +# Ignored if Hostname is defined. +# +# Mandatory: no +# Default: +# HostnameItem=system.hostname + +### Option: HostMetadata +# Optional parameter that defines host metadata. +# Host metadata is used at host auto-registration process. +# An agent will issue an error and not start if the value is over limit of 255 characters. +# If not defined, value will be acquired from HostMetadataItem. +# +# Mandatory: no +# Range: 0-255 characters +# Default: +# HostMetadata= + +### Option: HostMetadataItem +# Optional parameter that defines an item used for getting host metadata. +# Host metadata is used at host auto-registration process. +# During an auto-registration request an agent will log a warning message if +# the value returned by specified item is over limit of 255 characters. +# This option is only used when HostMetadata is not defined. +# +# Mandatory: no +# Default: +# HostMetadataItem= + +### Option: RefreshActiveChecks +# How often list of active checks is refreshed, in seconds. +# +# Mandatory: no +# Range: 60-3600 +# Default: +# RefreshActiveChecks=120 + +### Option: BufferSend +# Do not keep data longer than N seconds in buffer. +# +# Mandatory: no +# Range: 1-3600 +# Default: +# BufferSend=5 + +### Option: BufferSize +# Maximum number of values in a memory buffer. The agent will send +# all collected data to Zabbix Server or Proxy if the buffer is full. +# +# Mandatory: no +# Range: 2-65535 +# Default: +# BufferSize=100 + +### Option: MaxLinesPerSecond +# Maximum number of new lines the agent will send per second to Zabbix Server +# or Proxy processing 'log' and 'logrt' active checks. +# The provided value will be overridden by the parameter 'maxlines', +# provided in 'log' or 'logrt' item keys. +# +# Mandatory: no +# Range: 1-1000 +# Default: +# MaxLinesPerSecond=100 + +############ ADVANCED PARAMETERS ################# + +### Option: Alias +# Sets an alias for parameter. It can be useful to substitute long and complex parameter name with a smaller and simpler one. +# +# Mandatory: no +# Range: +# Default: + +### Option: Timeout +# Spend no more than Timeout seconds on processing +# +# Mandatory: no +# Range: 1-30 +# Default: +# Timeout=3 + +### Option: AllowRoot +# Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent +# will try to switch to user 'zabbix' instead. Has no effect if started under a regular user. +# 0 - do not allow +# 1 - allow +# +# Mandatory: no +# Default: +# AllowRoot=0 + +### Option: Include +# You may include individual files or all files in a directory in the configuration file. +# Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. +# +# Mandatory: no +# Default: +# Include= + +# Include=/usr/local/etc/zabbix_agentd.userparams.conf +# Include=/usr/local/etc/zabbix_agentd.conf.d/ + +####### USER-DEFINED MONITORED PARAMETERS ####### + +### Option: UnsafeUserParameters +# Allow all characters to be passed in arguments to user-defined parameters. +# 0 - do not allow +# 1 - allow +# +# Mandatory: no +# Range: 0-1 +# Default: +# UnsafeUserParameters=0 + +### Option: UserParameter +# User-defined parameter to monitor. There can be several user-defined parameters. +# Format: UserParameter=<key>,<shell command> +# See 'zabbix_agentd' directory for examples. +# +# Mandatory: no +# Default: +# UserParameter= + +####### LOADABLE MODULES ####### + +### Option: LoadModulePath +# Full path to location of agent modules. +# Default depends on compilation options. +# +# Mandatory: no +# Default: +# LoadModulePath=${libdir}/modules + +### Option: LoadModule +# Module to load at agent startup. Modules are used to extend functionality of the agent. +# Format: LoadModule=<module.so> +# The modules must be located in directory specified by LoadModulePath. +# It is allowed to include multiple LoadModule parameters. +# +# Mandatory: no +# Default: +# LoadModule= |