Version bumped. Changed master site and added zlib, doc IUSE flags. Ebuild contributed by Lalo Martins <lalo@laranja.org>, closing bug #34667

2 files changed, 154 insertions, 0 deletions

diff --git a/app-text/lout/files/digest-lout-3.29 b/app-text/lout/files/digest-lout-3.29
new file mode 100644
index 000000000000..b034db40f516
--- /dev/null
+++ b/app-text/lout/files/digest-lout-3.29
@@ -0,0 +1 @@
+MD5 cff3a2c009b928e794a9a57b208df788 lout-3.29.tar.gz 1948258
diff --git a/app-text/lout/files/lout-3.29-makefile-gentoo.patch b/app-text/lout/files/lout-3.29-makefile-gentoo.patch
new file mode 100644
index 000000000000..8599d11dde7f
--- /dev/null
+++ b/app-text/lout/files/lout-3.29-makefile-gentoo.patch
@@ -0,0 +1,153 @@
+--- makefile.orig	2003-11-27 22:18:21.000000000 -0200
++++ makefile	2003-11-27 22:20:33.000000000 -0200
+@@ -23,6 +23,13 @@
+ #  carry out all the steps, in exactly the order given.  Believe me, it       #
+ #  will be much faster than doing it any other way.                           #
+ #                                                                             #
++#  If you're using a modern make program, you don't need to actually edit the #
++#  makefile to set the macros; instead, you can pass them in the command line #
++#  - for example, you can run "make lout BASEDIR=/home/jeff/lout".  Editing   #
++#  the makefile is actually easier - but the command-line alternative makes   #
++#  it easier to automate the building process (for example, for package       #
++#  maintainers).  The recommended make program is GNU make.                   #
++#                                                                             #
+ #  (1) Set exactly one of the following macros defined below to 1 and the     #
+ #      others all to 0, to indicate the operating system under which the      #
+ #      Lout binary is to run.  At present OSUNIX and OSDOS work but OSMAC     #
+@@ -98,6 +105,10 @@
+ #      MANDIR    Directory where the lout and prg2lout online manual entries  #
+ #                (in nroff -man) go.  This directory is assumed to exist.     #
+ #                                                                             #
++#      Alternatively, you may just set the macro BASEDIR.  The default        #
++#      setting of the macros above is based on $(BASEDIR) - for example,      #
++#      BINDIR is set to $(BASEDIR)/bin.                                       #
++#                                                                             #
+ #  (7) Set the following two macros defined below to appropriate values.      #
+ #      I strongly recommend CHARIN=1 and CHAROUT=0 for all sites (English     #
+ #      and non-English language).  This way we get a truly international      #
+@@ -281,10 +292,15 @@
+ # DEBUGGING = 1
+ # TRACING = -g
+ 
+-BINDIR	= /home/jeff/bin
+-LIBDIR	= /home/jeff/lout.lib
+-DOCDIR	= /home/jeff/lout.doc
+-MANDIR	= /home/jeff/lout.man
++BASEDIR = /usr/local
++BINDIR	= $(BASEDIR)/bin
++LIBDIR	= $(BASEDIR)/share/lout
++DOCDIR	= $(BASEDIR)/share/doc/lout
++MANDIR	= $(BASEDIR)/share/man/man1
++#BINDIR	= /home/jeff/bin
++#LIBDIR	= /home/jeff/lout.lib
++#DOCDIR	= /home/jeff/lout.doc
++#MANDIR	= /home/jeff/lout.man
+ 
+ LIBFONT = font
+ LIBMAPS = maps
+@@ -355,45 +371,41 @@
+ 	$(CC) $(COPTS) -o prg2lout prg2lout.c
+ 	chmod a+x prg2lout
+ 
+-install: lout prg2lout
++installbin: lout prg2lout
+ 	@echo ""
+ 	@echo "(a) Installing lout and prg2lout binaries into BINDIR $(BINDIR)"
++	mkdir -m 755 -p $(BINDIR)
+ 	cp lout $(BINDIR)/lout
+ 	chmod 755 $(BINDIR)/lout
+ 	cp prg2lout $(BINDIR)/prg2lout
+ 	chmod 755 $(BINDIR)/prg2lout
++
++installlib: lout
+ 	@echo ""
+ 	@echo "(b) Installing library files into LIBDIR $(LIBDIR)"
+-	mkdir $(LIBDIR)
+-	chmod 755 $(LIBDIR)
+-	@echo ""
+-	mkdir $(LIBDIR)/$(LIBINCL)
+-	chmod 755 $(LIBDIR)/$(LIBINCL)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBINCL)
+ 	cp include/* $(LIBDIR)/$(LIBINCL)
+ 	chmod 644 $(LIBDIR)/$(LIBINCL)/*
+ 	@echo ""
+-	mkdir $(LIBDIR)/$(LIBDATA)
+-	chmod 755 $(LIBDIR)/$(LIBDATA)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBDATA)
+ 	cp data/* $(LIBDIR)/$(LIBDATA)
+ 	chmod 644 $(LIBDIR)/$(LIBDATA)/*
+ 	@echo ""
+-	mkdir $(LIBDIR)/$(LIBHYPH)
+-	chmod 755 $(LIBDIR)/$(LIBHYPH)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBHYPH)
+ 	cp hyph/* $(LIBDIR)/$(LIBHYPH)
+ 	chmod 644 $(LIBDIR)/$(LIBHYPH)/*
+ 	@echo ""
+-	mkdir $(LIBDIR)/$(LIBFONT)
+-	chmod 755 $(LIBDIR)/$(LIBFONT)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBFONT)
+ 	cp font/* $(LIBDIR)/$(LIBFONT)
+ 	chmod 644 $(LIBDIR)/$(LIBFONT)/*
+ 	@echo ""
+-	mkdir $(LIBDIR)/$(LIBMAPS)
+-	chmod 755 $(LIBDIR)/$(LIBMAPS)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBMAPS)
+ 	cp maps/* $(LIBDIR)/$(LIBMAPS)
+ 	chmod 644 $(LIBDIR)/$(LIBMAPS)/*
++
++init: installbin installlib
+ 	@echo ""
+-	mkdir $(LIBDIR)/$(LIBLOCA)
+-	chmod 755 $(LIBDIR)/$(LIBLOCA)
++	mkdir -m 755 -p $(LIBDIR)/$(LIBLOCA)
+ 	@echo ""
+ 	@echo "(c) Initializing run (should be silent, no errors expected)"
+ 	$(BINDIR)/lout -x -s $(LIBDIR)/$(LIBINCL)/init
+@@ -402,8 +414,11 @@
+ 	chmod 644 $(LIBDIR)/$(LIBDATA)/*
+ 	chmod 644 $(LIBDIR)/$(LIBHYPH)/*
+ 
++install: init
++
+ installman:
+ 	@echo ""
++	mkdir -m 755 -p $(MANDIR)
+ 	@echo "Installing manual entries into MANDIR $(MANDIR)"
+ 	sed -e "s@<BINDIR>@$(BINDIR)@" -e "s@<LIBDIR>@$(LIBDIR)@"	\
+ 	    -e "s@<DOCDIR>@$(DOCDIR)@" -e "s@<MANDIR>@$(MANDIR)@"	\
+@@ -415,18 +430,15 @@
+ installdoc:
+ 	@echo ""
+ 	@echo "Creating DOCDIR $(DOCDIR) and copying documentation into it"
+-	$(RCOPY) doc $(DOCDIR)
+-	chmod 755 $(DOCDIR)
+-	chmod 755 $(DOCDIR)/*
+-	chmod 644 $(DOCDIR)/*/*
++	mkdir -p $(DOCDIR)
++	$(RCOPY) doc/* $(DOCDIR)
++	chmod -R 755 $(DOCDIR)
++	find $(DOCDIR) -type f -exec chmod 644 '{}' ';'
+ 
+ installfr:
+ 	@echo ""
+ 	@echo "Putting French error messages into $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)"
+-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
+-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
+-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
+-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
++	mkdir -m 755 -p $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
+ 	cp locale/msgs.fr $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
+ 	gencat $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/errors.$(LOC_FR)	\
+ 	       $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
+@@ -435,10 +447,7 @@
+ installde:
+ 	@echo ""
+ 	@echo "Putting German error messages into $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)"
+-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
+-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
+-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
+-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
++	mkdir -m 755 -p $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
+ 	cp locale/msgs.de $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)
+ 	gencat $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/errors.$(LOC_DE)	\
+ 	       $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)