cleaning old versions

5 files changed, 5 insertions, 1297 deletions

diff --git a/app-office/openoffice/ChangeLog b/app-office/openoffice/ChangeLog
index c0f389987a61..2eb9dbd7a11b 100644
--- a/app-office/openoffice/ChangeLog
+++ b/app-office/openoffice/ChangeLog
@@ -1,6 +1,10 @@
 # ChangeLog for app-office/openoffice
 # Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/app-office/openoffice/ChangeLog,v 1.53 2004/01/24 10:53:59 suka Exp $
+# $Header: /var/cvsroot/gentoo-x86/app-office/openoffice/ChangeLog,v 1.54 2004/01/24 11:19:26 pauldv Exp $
+
+  24 Jan 2004; <paul@gentoo.org> openoffice-1.1.0-r1.ebuild,
+  openoffice-1.1.0.ebuild:
+  Cleaning up old versions
 
 *openoffice-1.1.0-r3 (24 Jan 2004)
 
diff --git a/app-office/openoffice/files/digest-openoffice-1.1.0 b/app-office/openoffice/files/digest-openoffice-1.1.0
deleted file mode 100644
index ca3bad69d473..000000000000
--- a/app-office/openoffice/files/digest-openoffice-1.1.0
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 bec8b41089ebdad2831f3c456973ad4e OOo_1.1.0_source.tar.bz2 189164050
-MD5 fdb06fdb5a4670b172f9fb738b717be9 gpc231.tar.Z 27917
-MD5 1fc0b188f1fe1216776e5855d2da141f freetype-2.1.4.tar.bz2 806647
diff --git a/app-office/openoffice/files/digest-openoffice-1.1.0-r1 b/app-office/openoffice/files/digest-openoffice-1.1.0-r1
deleted file mode 100644
index ca3bad69d473..000000000000
--- a/app-office/openoffice/files/digest-openoffice-1.1.0-r1
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 bec8b41089ebdad2831f3c456973ad4e OOo_1.1.0_source.tar.bz2 189164050
-MD5 fdb06fdb5a4670b172f9fb738b717be9 gpc231.tar.Z 27917
-MD5 1fc0b188f1fe1216776e5855d2da141f freetype-2.1.4.tar.bz2 806647
diff --git a/app-office/openoffice/openoffice-1.1.0-r1.ebuild b/app-office/openoffice/openoffice-1.1.0-r1.ebuild
deleted file mode 100644
index a2fd631ec8d2..000000000000
--- a/app-office/openoffice/openoffice-1.1.0-r1.ebuild
+++ /dev/null
@@ -1,650 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-office/openoffice/openoffice-1.1.0-r1.ebuild,v 1.11 2003/11/14 12:39:41 seemant Exp $
-
-# IMPORTANT:  This is extremely alpha!!!
-
-# Notes:
-#
-#   This will take a HELL of a long time to compile, be warned.
-#   According to openoffice.org, it takes approximately 12 hours on a
-#   P3/600 with 256mb ram.  And thats where building is its only task.
-#
-#   It takes about 6 hours on my P4 1.8 with 512mb memory, and the
-#   build only needs about 2.1GB of disk space - Azarah.
-#
-#   You will also need a bucketload of diskspace ... in the order of
-#   4-5 gb free to store all the compiled files and installation
-#   directories.
-#
-#   The information on how to build and what is required comes from:
-#   http://www.openoffice.org/dev_docs/source/build_linux.html
-#   http://tools.openoffice.org/ext_comp.html
-#
-# Todo:
-#
-#   Get support going for installing a custom language pack.  Also
-#   need to be able to install more than one language pack.
-
-inherit flag-o-matic eutils
-# Compile problems with these ...
-filter-flags "-funroll-loops"
-filter-flags "-fomit-frame-pointer"
-replace-flags "-O3" "-O2"
-
-# Enable Bytecode Interpreter for freetype ...
-append-flags "-DTT_CONFIG_OPTION_BYTECODE_INTERPRETER"
-
-inherit gcc
-# We want gcc3 if possible!!!!
-export WANT_GCC_3="yes"
-
-inherit virtualx
-
-# Set $ECPUS to amount of processes multiprocessing build should use.
-# NOTE:  Setting this too high might cause dmake to segfault!!
-#        Setting this to anything but "1" on my pentium4 causes things
-#        to segfault :(
-[ -z "${ECPUS}" ] && export ECPUS="1"
-
-
-LOC="/opt"
-FT_VER="2.1.4"
-STLP_VER="4.5.3"
-MY_PV="${PV/_rc/rc}"
-INSTDIR="${LOC}/OpenOffice.org${PV}"
-S="${WORKDIR}/oo_${MY_PV/1.1.0/1.1}_src"
-DESCRIPTION="OpenOffice.org, a full office productivity suite."
-SRC_URI="mirror://openoffice/stable/${MY_PV}/OOo_${MY_PV}_source.tar.bz2
-	ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc231.tar.Z
-	mirror://sourceforge/freetype/freetype-${FT_VER}.tar.bz2"
-HOMEPAGE="http://www.openoffice.org/"
-
-LICENSE="LGPL-2 | SISSL-1.1"
-SLOT="0"
-KEYWORDS="~x86"
-IUSE="gnome kde"
-
-RDEPEND=">=sys-libs/glibc-2.1
-	!=sys-libs/glibc-2.3.1*
-	>=dev-lang/perl-5.0
-	virtual/x11
-	app-arch/zip
-	app-arch/unzip
-	dev-libs/expat
-	>=virtual/jdk-1.4.1
-	virtual/lpr
-	ppc? ( >=sys-libs/glibc-2.2.5-r7
-	>=sys-devel/gcc-3.2 )" # needed for sqrtl patch recently introduced
-
-DEPEND="${RDEPEND}
-	app-shells/tcsh
-	!app-office/openoffice-bin
-	>=sys-apps/findutils-4.1.20-r1
-	!app-arch/star"
-
-# fix a bug with tcsh and dircolors
-#
-# Azarah -- 10 April 2002
-export LS_COLORS=""
-
-
-pkg_setup() {
-
-	if [ "$(gcc-version)" != "3.2" ] && [ "$(gcc-version)" != "3.3" ]
-	then
-		eerror
-		eerror "This build needs gcc-3.{2,3}.x, but due to profile"
-		eerror "settings, it cannot DEPEND on it, so please merge it"
-		eerror "manually:"
-		eerror
-		eerror " #  ebuild ${PORTDIR}/sys-devel/gcc/gcc-3.2.1.ebuild merge"
-		eerror
-		eerror "Please make sure that you use the latest availible revision of"
-		eerror "gcc."
-		eerror
-		die
-	fi
-
-	if [ -z "$(echo ${JDK_HOME} | grep "blackdown")" ] && [ "${FORCE_JAVA}" != "yes" ]
-	then
-		eerror
-		eerror "This ebuild has only been tested with the blackdown port of"
-		eerror "java.  If you use another java implementation, it could fail"
-		eerror "horribly, so please merge the blackdown-jdk and set it as"
-		eerror "system VM before proceeding:"
-		eerror
-		eerror " # emerge blackdown-jdk"
-		eerror " # java-config --set-system-vm=blackdown-jdk-<VERSION>"
-		eerror " # env-update"
-		eerror " # source /etc/profile"
-		eerror
-		eerror "Please adjust <VERSION> according to the version installed in"
-		eerror "/opt."
-		eerror
-		eerror "If you however want to test another JDK (not officially supported),"
-		eerror "you could do the following:"
-		eerror
-		eerror " # export FORCE_JAVA=yes"
-		eerror
-		die
-	fi
-
-	ewarn "****************************************************************"
-	ewarn " It is important to note that OpenOffice.org is a very fragile  "
-	ewarn " build when it comes to CFLAGS.  A number of flags have already "
-	ewarn " been filtered out.  If you experience difficulty merging this  "
-	ewarn " package and use agressive CFLAGS, lower the CFLAGS and try to  "
-	ewarn " merge again.					               "
-	ewarn "****************************************************************"
-
-	set_languages
-
-}
-
-set_languages () {
-	if [ -z "$LANGUAGE" ]; then
-		LANGUAGE=01
-	fi
-
-	case "$LANGUAGE" in
-		01 | ENUS ) LANGNO=01; LANGNAME=ENUS; LFULLNAME="US English (default)"
-			;;
-		03 | PORT ) LANGNO=03; LANGNAME=PORT; LFULLNAME=Portuguese
-			;;
-		07 | RUSS ) LANGNO=07; LANGNAME=RUSS; LFULLNAME=Russian
-			;;
-		30 | GREEK ) LANGNO=30; LANGNAME=GREEK; LFULLNAME=Greek
-			;;
-		31 | DTCH ) LANGNO=31; LANGNAME=DTCH; LFULLNAME=Dutch
-			;;
-		33 | FREN ) LANGNO=33; LANGNAME=FREN; LFULLNAME=French
-			;;
-		34 | SPAN ) LANGNO=34; LANGNAME=SPAN; LFULLNAME=Spanish
-			;;
-		35 | FINN ) LANGNO=35; LANGNAME=FINN; LFULLNAME=Finnish
-			;;
-		37 | CAT ) LANGNO=37; LANGNAME=CAT; LFULLNAME=Catalan
-			;;
-		39 | ITAL ) LANGNO=39; LANGNAME=ITAL; LFULLNAME=Italian
-			;;
-		42 | CZECH ) LANGNO=42; LANGNAME=CZECH; LFULLNAME=Czech
-			;;
-		43 | SLOVAK ) LANGNO=43; LANGNAME=SLOVAK; LFULLNAME=Slovak
-			;;
-		45 | DAN ) LANGNO=45; LANGNAME=DAN; LFULLNAME=Danish
-			;;
-		46 | SWED ) LANGNO=46; LANGNAME=SWED; LFULLNAME=Swedish
-			;;
-		48 | POL ) LANGNO=48; LANGNAME=POL; LFULLNAME=Polish
-			;;
-		49 | GER ) LANGNO=49; LANGNAME=GER; LFULLNAME=German
-			;;
-		55 | PORTBR ) LANGNO=55; LANGNAME=PORTBR; LFULLNAME="Portuguese brazilian"
-			;;
-		66 | THAI ) LANGNO=66; LANGNAME=THAI; LFULLNAME=Thai
-			;;
-		77 | ESTONIAN ) LANGNO=77; LANGNAME=ESTONIAN; LFULLNAME=Estonian
-			;;
-		81 | JAPN ) LANGNO=81; LANGNAME=JAPN; LFULLNAME="Japanese"
-			;;
-		82 | KOREAN ) LANGNO=82; LANGNAME=KOREAN; LFULLNAME=Korean
-			;;
-		86 | CHINSIM ) LANGNO=86; LANGNAME=CHINSIM; LFULLNAME="Simplified Chinese (PRC)"
-			;;
-		88 | CHINTRAD ) LANGNO=88; LANGNAME=CHINTRAD; LFULLNAME="Traditional Chinese (taiwan)"
-			;;
-		90 | TURK ) LANGNO=90; LANGNAME=TURK; LFULLNAME=Turkish
-			;;
-		91 | HINDI ) LANGNO=91; LANGNAME=HINDI; LFULLNAME=Hindi
-			;;
-		96 | ARAB ) LANGNO=96; LANGNAME=ARAB; LFULLNAME=Arabic
-			;;
-		97 | HEBREW ) LANGNO=97; LANGNAME=HEBREW; LFULLNAME=Hebrew
-			;;
-		* )
-			eerror "Unknown LANGUAGE setting!"
-			eerror
-			eerror "Known LANGUAGE settings are:"
-			eerror "  ENUS | PORT | RUSS | GREEK | DTCH | FREN | SPAN | FINN | CAT | ITAL |"
-			eerror "  CZECH | SLOVAK | DAN | SWED | POL | GER | PORTBR | THAI | ESTONIAN |"
-			eerror "  JAPN | KOREAN | CHINSIM | CHINTRAD | TURK | HINDI | ARAB | HEBREW"
-			die
-			;;
-	esac
-}
-
-oo_setup() {
-
-	unset LANGUAGE
-	unset LANG
-
-	export NEW_GCC="0"
-
-	if [ -x /usr/sbin/gcc-config ]
-	then
-		# Do we have a gcc that use the new layout and gcc-config ?
-		if /usr/sbin/gcc-config --get-current-profile &> /dev/null
-		then
-			export NEW_GCC="1"
-			export GCC_PROFILE="$(/usr/sbin/gcc-config --get-current-profile)"
-
-			# Just recheck gcc version ...
-			if [ "$(gcc-version)" != "3.2" ] && [ "$(gcc-version)" != "3.3" ]
-			then
-				# See if we can get a gcc profile we know is proper ...
-				if /usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1 &> /dev/null
-				then
-					export PATH="$(/usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1):${PATH}"
-					export GCC_PROFILE="${CHOST}-3.2.1"
-				else
-					eerror "This build needs gcc-3.2 or gcc-3.3!"
-					eerror
-					eerror "Use gcc-config to change your gcc profile:"
-					eerror
-					eerror "  # gcc-config $CHOST-3.2.1"
-					eerror
-					eerror "or whatever gcc version is relevant."
-					die
-				fi
-			fi
-		fi
-	fi
-
-	export JAVA_BINARY="`which java`"
-}
-
-src_unpack() {
-
-	oo_setup
-
-	cd ${WORKDIR}
-	unpack OOo_${MY_PV}_source.tar.bz2 gpc231.tar.Z
-
-	# Install gpc
-	cd ${WORKDIR}/gpc231
-	cp gpc.* ${S}/external/gpc
-
-	cd ${S}
-
-	cd ${S}/stlport
-	rm STLport-4.5.3.patch
-	epatch ${FILESDIR}/${PV}/newstlportfix.patch
-	cd ${S}
-	epatch ${FILESDIR}/${PV}/no-mozab.patch
-
-	epatch ${FILESDIR}/${PV}/nptl.patch
-
-	epatch ${FILESDIR}/${PV}/openoffice-1.1.0-linux-2.6-fix.patch
-
-	#The gcc-3.2.3 version in gentoo is fixed for the internal error that
-	#blocks compilation with it, so remove the check from the configure script
-#	epatch ${FILESDIR}/${PV}/fixed-gcc.patch
-
-#	epatch ${FILESDIR}/${PV}/no-crashrep.patch
-
-#	einfo "Fixing up crashrep/source/unx/makefile.mk"
-#	sed -i -e "s,\(PRODUCT[^a-zA-Z]*\)\(FULL\),\1full," ${S}/crashrep/source/unx/makefile.mk||die
-#	einfo "Removing crashrep from the installed set"
-#	sed -i -e "s,\(crashrep \),," ${S}/instsetoo/prj/build.lst
-
-
-
-	# Now for our optimization flags ...
-	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
-		${S}/solenv/inc/unxlngi3.mk
-	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
-		${S}/solenv/inc/unxlngi4.mk
-
-	# Some makefiles are not multiprocess ready (Mandrake)
-	cd ${S}; einfo "Fixing makefiles for multiprocess builds..."
-	for x in io/source/stm dtrans/source/X11 idlc/source nas zlib toolkit/util \
-		comphelper/util padmin/source svtools/util bridges/source/prot_uno \
-		framework/util framework/source/unotypes
-	do
-		perl -pi -e "s/^(PRJNAME)/MAXPROCESS=1\n\1/" ${x}/makefile.mk
-	done
-
-	#Do our own branding by setting gentoo linux as the vendor
-	sed -i -e "s,\(//\)\(.*\)\(my company\),\2Gentoo Linux," ${S}/offmgr/source/offapp/intro/ooo.src
-}
-
-get_EnvSet() {
-
-	# Determine what Env file we should be using (Az)
-	export LinuxEnvSet="LinuxIntelEnv.Set"
-	use sparc && export LinuxEnvSet="LinuxSparcEnv.Set"
-	use sparc64 && export LinuxEnvSet="LinuxSparcEnv.Set"
-	use ppc && export LinuxEnvSet="LinuxPPCEnv.Set"
-	use alpha && export LinuxEnvSet="LinuxAlphaEnv.Set"
-
-	# Get build specific stuff (Az)
-	export SOLVER="$(awk '/^setenv UPD / {gsub(/\"/, ""); print $3}' ${LinuxEnvSet})"
-	export SOLPATH="$(awk '/^setenv INPATH / {gsub(/\"/, ""); print $3}' ${LinuxEnvSet})"
-}
-
-src_compile() {
-
-	if [ "$(gcc-version)" == "3.2" ]; then
-		replace-flags "-march=pentium4" "-march=pentium3 -mcpu=pentium4"
-	fi
-
-	addpredict /bin
-	addpredict /root/.gconfd
-	local buildcmd=""
-
-	set_languages
-
-	oo_setup
-
-	# Setup default compilers (We overide gcc2 if that is default here)
-	export CC="$(gcc-getCC)"
-	export CXX="$(gcc-getCXX)"
-
-	# Enable ccache for this build (Az)
-	if [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
-	     "${FEATURES/ccache/}" != "${FEATURES}" -a \
-	     -d /usr/bin/ccache -a -x /usr/bin/ccache/ccache ]
-	then
-		# Build uses its own env with $PATH, etc, so
-		# we take the easy way out. (Az)
-		export CC="/usr/bin/ccache/ccache ${CC}"
-		export CXX="/usr/bin/ccache/ccache ${CXX}"
-
-	# Enable new ccache for this build
-	elif [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
-	     "${FEATURES/ccache/}" != "${FEATURES}" -a \
-	     -x /usr/bin/ccache -a ! -d /usr/bin/ccache ]
-	then
-		# Build uses its own env with $PATH, etc, so
-		# we take the easy way out. (Az)
-		export CC="/usr/bin/ccache ${CC}"
-		export CXX="/usr/bin/ccache ${CXX}"
-	fi
-
-	# Enable distcc for this build (Az)
-	if [ "${FEATURES/-distcc/}" = "${FEATURES}" -a \
-	     "${FEATURES/distcc/}" != "${FEATURES}" -a \
-		 -x /usr/bin/distcc ]
-	then
-		# Do not bump ECPUS if the user did not touch it, as currently
-		# it -PP do not work properly (segfaulting). (Az)
-		[ "$(echo ${DISTCC_HOSTS} | wc -w)" -gt 1 -a "${ECPUS}" -qt 1 ] && \
-			export ECPUS="$(echo ${DISTCC_HOSTS} | wc -w)"
-
-		export CC="distcc ${CC}"
-		export CXX="distcc ${CXX}"
-	fi
-
-	# Do NOT compile with a external STLport, as gcc-2.95.3 users will
-	# get linker errors due to the ABI being different (STLport will be
-	# compiled with 2.95.3, while OO is compiled with 3.x). (Az)
-	einfo "Configuring OpenOffice.org with language support for ${LFULLNAME}..."
-	cd ${S}/config_office
-	rm -f config.cache
-	if [ "LANGNAME" != "ENUS" ]; then
-		LANGNAME="${LANGNAME},ENUS"
-	fi
-	./configure --enable-gcc3 \
-		--with-jdk-home=${JAVA_HOME} \
-		--with-lang=${LANGNAME}\
-		--with-x || die
-
-	cd ${S}
-	get_EnvSet
-
-	# Do not include /usr/include in header search path, and
-	# same thing for internal gcc include dir, as gcc3 handles
-	# it correctly by default! (Az)
-	perl -pi -e "s| -I/usr/include||g" ${LinuxEnvSet}
-#	perl -pi -e "s| -I$(gcc-libpath)/include||g" ${LinuxEnvSet}
-
-	if [ "${NEW_GCC}" -eq "1" ]
-	then
-		local gcc_path="$(/usr/sbin/gcc-config --get-bin-path ${GCC_PROFILE})"
-
-		# Setup path for new gcc layout in $LinuxEnvSet, else the build
-		# environment will not find gcc ... (Az)
-		perl -pi -e "s|PATH \.:\$SOLARVER|PATH \.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
-		# New builds start quoting stuff ...
-		perl -pi -e "s|PATH \"\.:\$SOLARVER|PATH \"\.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
-	fi
-
-	# Should the build use multiprocessing?
-	# We use build.pl directly, as dmake tends to segfault. (Az)
-	if [ "${ECPUS}" -gt 1 ]
-	then
-		buildcmd="${S}/solenv/bin/build.pl --all -P ${ECPUS} product=full"
-	else
-		buildcmd="${S}/solenv/bin/build.pl --all product=full"
-	fi
-
-	if [ -z "$(grep 'CCCOMP' ${S}/${LinuxEnvSet})" ]
-	then
-		# Set CCCOMP and CXXCOMP.  This is still needed for STLport
-		echo "setenv CCCOMP \"${CC}\"" >> ${S}/${LinuxEnvSet}
-		echo "setenv CXXCOMP \"${CXX}\"" >> ${S}/${LinuxEnvSet}
-	fi
-
-	if [ "$(gcc-major-version)" -eq 3 ]
-	then
-		mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/{lib,inc}
-
-		einfo "Installing GCC related libs..."
-		# Workaround for missing libs with GCC3 (thanks to Debian) (Az)
-		cd ${S}/solver/${SOLVER}/${SOLPATH}/lib
-		cp $(gcc-libpath)/libstdc++.so.$(gcc-libstdcxx-major-version)* . || \
-			die "Could not copy gcc-libs!"
-		cp $(gcc-libpath)/libgcc_s.so* . || die "Could not copy gcc-libs!"
-		cd ${S}
-	fi
-
-	einfo "Bootstrapping OpenOffice.org..."
-	# Get things ready for bootstrap (Az)
-	chmod 0755 ${S}/solenv/bin/*.pl
-	mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/inc
-	touch ${S}/solver/${SOLVER}/${SOLPATH}/inc/minormkchanged.flg
-	# Bootstrap ...
-	./bootstrap
-
-	if [ "$(gcc-major-version)" -eq 3 ]
-	then
-		local LIBFILE="$(readlink `gcc-libpath`/libstdc++.so.`gcc-libstdcxx-major-version`)"
-		local LIBVERSION="$(echo ${LIBFILE} | sed -e 's|libstdc++\.so\.||g')"
-		# Get this beast to use the right version of libstdc++ ... (Az)
-		echo "LIBSTDCPP3:=${LIBVERSION}" >> \
-			${S}/solver/${SOLVER}/${SOLPATH}/inc/comp_ver.mk
-		cd ${S}
-	fi
-
-	einfo "Building OpenOffice.org..."
-	# Setup virtualmake
-	export maketype="tcsh"
-	echo "source ${S}/${LinuxEnvSet} && cd ${S}/instsetoo && ${buildcmd}" > build.tcsh
-	# Build needs X to compile! (Az)
-	virtualmake build.tcsh || die "Build failed!"
-
-	[ -d ${S}/instsetoo/${SOLPATH} ] || die "Cannot find build directory!"
-}
-
-src_install() {
-
-	# Sandbox issues; bug #11838
-	addpredict "/user"
-	addpredict "/share"
-	addpredict "/dev/dri"
-	addpredict "/usr/bin/soffice"
-	addpredict "/pspfontcache"
-
-	# This allows us to change languages without editing the ebuild.
-	#
-	#   languages1="ENUS,FREN,GERM,SPAN,ITAL,DTCH,PORT,SWED,POL,RUSS"
-	#   languages2="DAN,GREEK,TURK,CHINSIM,CHINTRAD,JAPN,KOREAN,CZECH,CAT"
-	#
-	# Supported languages for localized help files
-	#
-	#   helplangs="ENUS,FREN,GERM,SPAN,ITAL,SWED"
-	#
-	set_languages
-
-	get_EnvSet
-
-	# The install part should now be relatively OK compared to
-	# what it was.  Basically we use autoresponse files to install
-	# unattended, running under a Xvfb if needed.  Afterwards we
-	# just cleanout ${D} from the registry, etc.  This way we
-	# do not need pre-generated registry, and also fixes some weird
-	# bugs related to the old way we did things.
-	#
-	# <azarah@gentoo.org> (9 Sep 2002)
-
-	# Autoresponse file for main installation
-	cat > ${T}/rsfile-global <<-"END_RS"
-		[ENVIRONMENT]
-		INSTALLATIONMODE=INSTALL_NETWORK
-		INSTALLATIONTYPE=STANDARD
-		DESTINATIONPATH=<destdir>
-		OUTERPATH=
-		LOGFILE=
-		LANGUAGELIST=<LANGUAGE>
-
-		[JAVA]
-		JavaSupport=preinstalled_or_none
-	END_RS
-
-	# Autoresponse file for user isntallation
-	cat > ${T}/rsfile-local <<-"END_RS"
-		[ENVIRONMENT]
-		INSTALLATIONMODE=INSTALL_WORKSTATION
-		INSTALLATIONTYPE=WORKSTATION
-		DESTINATIONPATH=<home>/.openoffice/<pv>
-
-		[JAVA]
-		JavaSupport=none
-	END_RS
-
-	# Fixing install location in response file
-	sed -e "s|<destdir>|${D}${INSTDIR}|" \
-		${T}/rsfile-global > ${T}/autoresponse
-
-	einfo "Installing OpenOffice.org into build root..."
-	dodir ${INSTDIR}
-	cd ${S}/instsetoo/${SOLPATH}/${LANGNO}/normal
-	# Setup virtualmake
-	export maketype="./setup"
-	# We need X to install...
-	virtualmake "-v -r:${T}/autoresponse" ||die
-
-	echo
-	einfo "Removing build root from registry..."
-	# Remove totally useless stuff.
-	rm -f ${D}${INSTDIR}/program/{setup.log,sopatchlevel.sh}
-	# Remove build root from registry and co
-	egrep -rl "${D}" ${D}${INSTDIR}/* | \
-		xargs -i perl -pi -e "s|${D}||g" {} || :
-
-	einfo "Fixing permissions..."
-	# Fix permissions
-	find ${D}${INSTDIR}/ -type f -exec chmod a+r {} \;
-	chmod a+x ${D}${INSTDIR}/share/config/webcast/*.pl
-
-	# Fix symlinks
-	for x in "soffice program/spadmin" \
-		"program/setup setup" \
-		"program/spadmin spadmin"
-	do
-		dosym $(echo ${x} | awk '{print $1}') \
-			${INSTDIR}/$(echo ${x} | awk '{print $2}')
-	done
-
-	# Install user autoresponse file
-	insinto /etc/openoffice
-	sed -e "s|<pv>|${PV//_rc3/.0}|g" ${T}/rsfile-local > ${T}/autoresponse-${PV}.conf
-	doins ${T}/autoresponse-${PV}.conf
-
-	# Install wrapper script
-	exeinto /usr/bin
-	sed -e "s|<pv>|${PV}|g" \
-		${FILESDIR}/${PV}/ooffice-wrapper-1.3 > ${T}/ooffice
-	doexe ${T}/ooffice
-	# Component symlinks
-	dosym ooffice /usr/bin/oocalc
-	dosym ooffice /usr/bin/oodraw
-	dosym ooffice /usr/bin/ooimpress
-	dosym ooffice /usr/bin/oomath
-	dosym ooffice /usr/bin/oowriter
-	dosym ooffice /usr/bin/ooweb
-	dosym ooffice /usr/bin/oosetup
-	dosym ooffice /usr/bin/oopadmin
-
-	einfo "Installing Menu shortcuts (need \"gnome\" or \"kde\" in USE)..."
-	if [ -n "`use gnome`" ]
-	then
-		insinto /usr/share/gnome/apps/OpenOffice.org
-		# Install the files needed for the catagory
-		doins ${D}${INSTDIR}/share/gnome/net/.directory
-		doins ${D}${INSTDIR}/share/gnome/net/.order
-
-		for x in ${D}${INSTDIR}/share/gnome/net/*.desktop
-		do
-			# We have to handle setup differently
-			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
-			# Now fix the rest
-			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
-			doins ${x}
-		done
-	fi
-
-	if [ -n "`use kde`" ]
-	then
-		local kdeloc="${D}${INSTDIR}/share/kde/net/"
-
-		insinto /usr/share/applnk/OpenOffice.org\ 1.1
-		# Install the files needed for the catagory
-		doins ${kdeloc}/.directory
-		dodir /usr/share
-		# Install the icons and mime info
-		cp -a ${D}${INSTDIR}/share/kde/net/share/mimelnk ${D}${INSTDIR}/share/kde/net/share/icons ${D}/usr/share
-
-		for x in ${kdeloc}/*.desktop
-		do
-			# We have to handle setup differently
-			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
-			# Now fix the rest
-			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
-			doins ${x}
-		done
-	fi
-
-	# Unneeded, as they get installed into /usr/share...
-	# They are needed else user installation fails.
-#	rm -rf ${D}${INSTDIR}/share/{cde,gnome,kde}
-	rm -rf ${D}${INSTDIR}/share/cde
-#
-#	for f in ${D}/usr/share/gnome/apps/OpenOffice.org/* ; do
-#		echo 'Categories=Application;Office;' >> ${f}
-#	done
-
-	# Make sure these do not get nuked.
-	keepdir ${INSTDIR}/user/registry/res/en-us/org/openoffice/{Office,ucb}
-	keepdir ${INSTDIR}/user/psprint/{driver,fontmetric}
-	keepdir ${INSTDIR}/user/{autocorr,backup,plugin,store,temp,template}
-}
-
-pkg_postinst() {
-
-	einfo "******************************************************************"
-	einfo " To start OpenOffice.org, run:"
-	einfo
-	einfo "   $ ooffice"
-	einfo
-	einfo " Also, for individual components, you can use any of:"
-	einfo
-	einfo "   oocalc, oodraw, ooimpress, oomath, ooweb or oowriter"
-	einfo
-	einfo " If the fonts appear garbled in the user interface refer to "
-	einfo " Bug 8539, or http://www.openoffice.org/FAQs/fontguide.html#8"
-	einfo
-	einfo "******************************************************************"
-}
-
diff --git a/app-office/openoffice/openoffice-1.1.0.ebuild b/app-office/openoffice/openoffice-1.1.0.ebuild
deleted file mode 100644
index a466a4ed849b..000000000000
--- a/app-office/openoffice/openoffice-1.1.0.ebuild
+++ /dev/null
@@ -1,640 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-office/openoffice/openoffice-1.1.0.ebuild,v 1.11 2003/11/14 12:39:41 seemant Exp $
-
-# IMPORTANT:  This is extremely alpha!!!
-
-# Notes:
-#
-#   This will take a HELL of a long time to compile, be warned.
-#   According to openoffice.org, it takes approximately 12 hours on a
-#   P3/600 with 256mb ram.  And thats where building is its only task.
-#
-#   It takes about 6 hours on my P4 1.8 with 512mb memory, and the
-#   build only needs about 2.1GB of disk space - Azarah.
-#
-#   You will also need a bucketload of diskspace ... in the order of
-#   4-5 gb free to store all the compiled files and installation
-#   directories.
-#
-#   The information on how to build and what is required comes from:
-#   http://www.openoffice.org/dev_docs/source/build_linux.html
-#   http://tools.openoffice.org/ext_comp.html
-#
-# Todo:
-#
-#   Get support going for installing a custom language pack.  Also
-#   need to be able to install more than one language pack.
-
-inherit flag-o-matic eutils
-# Compile problems with these ...
-filter-flags "-funroll-loops"
-filter-flags "-fomit-frame-pointer"
-replace-flags "-O3" "-O2"
-
-# Enable Bytecode Interpreter for freetype ...
-append-flags "-DTT_CONFIG_OPTION_BYTECODE_INTERPRETER"
-
-inherit gcc
-# We want gcc3 if possible!!!!
-export WANT_GCC_3="yes"
-
-inherit virtualx
-
-# Set $ECPUS to amount of processes multiprocessing build should use.
-# NOTE:  Setting this too high might cause dmake to segfault!!
-#        Setting this to anything but "1" on my pentium4 causes things
-#        to segfault :(
-[ -z "${ECPUS}" ] && export ECPUS="1"
-
-
-LOC="/opt"
-FT_VER="2.1.4"
-STLP_VER="4.5.3"
-MY_PV="${PV/_rc/rc}"
-INSTDIR="${LOC}/OpenOffice.org${PV}"
-S="${WORKDIR}/oo_${MY_PV/1.1.0/1.1}_src"
-DESCRIPTION="OpenOffice.org, a full office productivity suite."
-SRC_URI="mirror://openoffice/stable/${MY_PV}/OOo_${MY_PV}_source.tar.bz2
-	ftp://ftp.cs.man.ac.uk/pub/toby/gpc/gpc231.tar.Z
-	mirror://sourceforge/freetype/freetype-${FT_VER}.tar.bz2"
-HOMEPAGE="http://www.openoffice.org/"
-
-LICENSE="LGPL-2 | SISSL-1.1"
-SLOT="0"
-KEYWORDS="x86"
-IUSE="gnome kde"
-
-RDEPEND=">=sys-libs/glibc-2.1
-	!=sys-libs/glibc-2.3.1*
-	>=dev-lang/perl-5.0
-	virtual/x11
-	app-arch/zip
-	app-arch/unzip
-	dev-libs/expat
-	>=virtual/jdk-1.4.1
-	virtual/lpr
-	ppc? ( >=sys-libs/glibc-2.2.5-r7
-	>=sys-devel/gcc-3.2 )" # needed for sqrtl patch recently introduced
-
-DEPEND="${RDEPEND}
-	app-shells/tcsh
-	!app-office/openoffice-bin
-	!app-arch/star"
-
-# fix a bug with tcsh and dircolors
-#
-# Azarah -- 10 April 2002
-export LS_COLORS=""
-
-
-pkg_setup() {
-
-	if [ "$(gcc-version)" != "3.2" ] && [ "$(gcc-version)" != "3.3" ];
-	then
-		eerror
-		eerror "This build needs gcc-3.2.x, but due to profile"
-		eerror "settings, it cannot DEPEND on it, so please merge it"
-		eerror "manually:"
-		eerror
-		eerror " #  ebuild ${PORTDIR}/sys-devel/gcc/gcc-3.2.1.ebuild merge"
-		eerror
-		eerror "Please make sure that you use the latest availible revision of"
-		eerror "gcc-3.2.  Thus if there is already a gcc-3.2.1-r2 out, use this"
-		eerror "rather than 3.2.1, etc."
-		eerror
-		eerror "As of writing, gcc-3.2.3-r1 seemed to create the most stable builds."
-		eerror "Also, because OO is such a complex build, ONLY gcc-3.2.3-r1 will be"
-		eerror "supported!"
-		eerror
-		eerror "This process is not highly recomended, as upgrading your compiler"
-		eerror "without upgrading your distribution can be detrimental to your "
-		eerror "installation of gentoo, unless you know what you're getting into"
-		eerror
-		die
-	fi
-
-	if [ -z "$(echo ${JDK_HOME} | grep "blackdown")" ] && [ "${FORCE_JAVA}" != "yes" ]
-	then
-		eerror
-		eerror "This ebuild has only been tested with the blackdown port of"
-		eerror "java.  If you use another java implementation, it could fail"
-		eerror "horribly, so please merge the blackdown-jdk and set it as"
-		eerror "system VM before proceeding:"
-		eerror
-		eerror " # emerge blackdown-jdk"
-		eerror " # java-config --set-system-vm=blackdown-jdk-<VERSION>"
-		eerror " # env-update"
-		eerror " # source /etc/profile"
-		eerror
-		eerror "Please adjust <VERSION> according to the version installed in"
-		eerror "/opt."
-		eerror
-		eerror "If you however want to test another JDK (not officially supported),"
-		eerror "you could do the following:"
-		eerror
-		eerror " # export FORCE_JAVA=yes"
-		eerror
-		die
-	fi
-
-	ewarn "****************************************************************"
-	ewarn " It is important to note that OpenOffice.org is a very fragile  "
-	ewarn " build when it comes to CFLAGS.  A number of flags have already "
-	ewarn " been filtered out.  If you experience difficulty merging this  "
-	ewarn " package and use agressive CFLAGS, lower the CFLAGS and try to  "
-	ewarn " merge again.					               "
-	ewarn "****************************************************************"
-
-
-}
-
-set_languages () {
-	case "$LANGUAGE" in
-		03 | PORT ) LANGNO=03; LANGNAME=PORT; LFULLNAME=Portuguese
-			;;
-		07 | RUSS ) LANGNO=07; LANGNAME=RUSS; LFULLNAME=Russian
-			;;
-		30 | GREEK ) LANGNO=30; LANGNAME=GREEK; LFULLNAME=Greek
-			;;
-		31 | DTCH ) LANGNO=31; LANGNAME=DTCH; LFULLNAME=Dutch
-			;;
-		33 | FREN ) LANGNO=33; LANGNAME=FREN; LFULLNAME=French
-			;;
-		34 | SPAN ) LANGNO=34; LANGNAME=SPAN; LFULLNAME=Spanish
-			;;
-		35 | FINN ) LANGNO=35; LANGNAME=FINN; LFULLNAME=Finnish
-			;;
-		37 | CAT ) LANGNO=37; LANGNAME=CAT; LFULLNAME=Catalan
-			;;
-		39 | ITAL ) LANGNO=39; LANGNAME=ITAL; LFULLNAME=Italian
-			;;
-		42 | CZECH ) LANGNO=42; LANGNAME=CZECH; LFULLNAME=Czech
-			;;
-		43 | SLOVAK ) LANGNO=43; LANGNAME=SLOVAK; LFULLNAME=Slovak
-			;;
-		45 | DAN ) LANGNO=45; LANGNAME=DAN; LFULLNAME=Danish
-			;;
-		46 | SWED ) LANGNO=46; LANGNAME=SWED; LFULLNAME=Swedish
-			;;
-		48 | POL ) LANGNO=48; LANGNAME=POL; LFULLNAME=Polish
-			;;
-		49 | GER ) LANGNO=49; LANGNAME=GER; LFULLNAME=German
-			;;
-		55 | PORTBR ) LANGNO=55; LANGNAME=PORTBR; LFULLNAME="Portuguese brazilian"
-			;;
-		66 | THAI ) LANGNO=66; LANGNAME=THAI; LFULLNAME=Thai
-			;;
-		77 | ESTONIAN ) LANGNO=77; LANGNAME=ESTONIAN; LFULLNAME=Estonian
-			;;
-		81 | JAPN ) LANGNO=81; LANGNAME=JAPN; LFULLNAME="Japanese"
-			;;
-		82 | KOREAN ) LANGNO=82; LANGNAME=KOREAN; LFULLNAME=Korean
-			;;
-		86 | CHINSIM ) LANGNO=86; LANGNAME=CHINSIM; LFULLNAME="Simplified Chinese (PRC)"
-			;;
-		88 | CHINTRAD ) LANGNO=88; LANGNAME=CHINTRAD; LFULLNAME="Traditional Chinese (taiwan)"
-			;;
-		90 | TURK ) LANGNO=90; LANGNAME=TURK; LFULLNAME=Turkish
-			;;
-		91 | HINDI ) LANGNO=91; LANGNAME=HINDI; LFULLNAME=Hindi
-			;;
-		96 | ARAB ) LANGNO=96; LANGNAME=ARAB; LFULLNAME=Arabic
-			;;
-		97 | HEBREW ) LANGNO=97; LANGNAME=HEBREW; LFULLNAME=Hebrew
-			;;
-		* )
-			LANGNO=01; LANGNAME=ENUS; LFULLNAME="US English (default)"
-			;;
-	esac
-}
-
-oo_setup() {
-
-	unset LANGUAGE
-	unset LANG
-
-	export NEW_GCC="0"
-
-	if [ -x /usr/sbin/gcc-config ]
-	then
-		# Do we have a gcc that use the new layout and gcc-config ?
-		if /usr/sbin/gcc-config --get-current-profile &> /dev/null
-		then
-			export NEW_GCC="1"
-			export GCC_PROFILE="$(/usr/sbin/gcc-config --get-current-profile)"
-
-			# Just recheck gcc version ...
-			if [ "$(gcc-version)" != "3.2" ] && [ "$(gcc-version)" != "3.3" ]
-			then
-				# See if we can get a gcc profile we know is proper ...
-				if /usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1 &> /dev/null
-				then
-					export PATH="$(/usr/sbin/gcc-config --get-bin-path ${CHOST}-3.2.1):${PATH}"
-					export GCC_PROFILE="${CHOST}-3.2.1"
-				else
-					eerror "This build needs gcc-3.2 or gcc-3.3!"
-					eerror
-					eerror "Use gcc-config to change your gcc profile:"
-					eerror
-					eerror "  # gcc-config $CHOST-3.2.1"
-					eerror
-					eerror "or whatever gcc version is relevant."
-					die
-				fi
-			fi
-		fi
-	fi
-
-	export JAVA_BINARY="`which java`"
-}
-
-src_unpack() {
-
-	oo_setup
-
-	cd ${WORKDIR}
-	unpack OOo_${MY_PV}_source.tar.bz2 gpc231.tar.Z
-
-	# Install gpc
-	cd ${WORKDIR}/gpc231
-	cp gpc.* ${S}/external/gpc
-
-	cd ${S}
-
-	cd ${S}/stlport
-	rm STLport-4.5.3.patch
-	epatch ${FILESDIR}/${PV}/newstlportfix.patch
-	cd ${S}
-	epatch ${FILESDIR}/${PV}/no-mozab.patch
-
-	#The gcc-3.2.3 version in gentoo is fixed for the internal error that
-	#blocks compilation with it, so remove the check from the configure script
-#	epatch ${FILESDIR}/${PV}/fixed-gcc.patch
-
-#	epatch ${FILESDIR}/${PV}/no-crashrep.patch
-
-#	einfo "Fixing up crashrep/source/unx/makefile.mk"
-#	sed -i -e "s,\(PRODUCT[^a-zA-Z]*\)\(FULL\),\1full," ${S}/crashrep/source/unx/makefile.mk||die
-#	einfo "Removing crashrep from the installed set"
-#	sed -i -e "s,\(crashrep \),," ${S}/instsetoo/prj/build.lst
-
-
-
-	# Now for our optimization flags ...
-	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
-		${S}/solenv/inc/unxlngi3.mk
-	perl -pi -e "s|^CFLAGSOPT=.*|CFLAGSOPT=${CFLAGS}|g" \
-		${S}/solenv/inc/unxlngi4.mk
-
-	# Some makefiles are not multiprocess ready (Mandrake)
-	cd ${S}; einfo "Fixing makefiles for multiprocess builds..."
-	for x in io/source/stm dtrans/source/X11 idlc/source nas zlib toolkit/util \
-		comphelper/util padmin/source svtools/util bridges/source/prot_uno \
-		framework/util framework/source/unotypes
-	do
-		perl -pi -e "s/^(PRJNAME)/MAXPROCESS=1\n\1/" ${x}/makefile.mk
-	done
-
-	#Do our own branding by setting gentoo linux as the vendor
-	sed -i -e "s,\(//\)\(.*\)\(my company\),\2Gentoo Linux," ${S}/offmgr/source/offapp/intro/ooo.src
-}
-
-get_EnvSet() {
-
-	# Determine what Env file we should be using (Az)
-	export LinuxEnvSet="LinuxIntelEnv.Set"
-	use sparc && export LinuxEnvSet="LinuxSparcEnv.Set"
-	use sparc64 && export LinuxEnvSet="LinuxSparcEnv.Set"
-	use ppc && export LinuxEnvSet="LinuxPPCEnv.Set"
-	use alpha && export LinuxEnvSet="LinuxAlphaEnv.Set"
-
-	# Get build specific stuff (Az)
-	export SOLVER="$(awk '/^setenv UPD / {gsub(/\"/, ""); print $3}' ${LinuxEnvSet})"
-	export SOLPATH="$(awk '/^setenv INPATH / {gsub(/\"/, ""); print $3}' ${LinuxEnvSet})"
-}
-
-src_compile() {
-	echo "old CFLAGS: ${CFLAGS}"
-	if [ "$(gcc-version)" == "3.2" ]; then
-		replace-flags "-march=pentium4" "-march=pentium3 -mcpu=pentium4"
-	fi
-	echo "new CFLAGS: ${CFLAGS}"
-	addpredict /bin
-	local buildcmd=""
-
-	set_languages
-
-	oo_setup
-
-	# Setup default compilers (We overide gcc2 if that is default here)
-	export CC="$(gcc-getCC)"
-	export CXX="$(gcc-getCXX)"
-
-	# Enable ccache for this build (Az)
-	if [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
-	     "${FEATURES/ccache/}" != "${FEATURES}" -a \
-	     -d /usr/bin/ccache -a -x /usr/bin/ccache/ccache ]
-	then
-		# Build uses its own env with $PATH, etc, so
-		# we take the easy way out. (Az)
-		export CC="/usr/bin/ccache/ccache ${CC}"
-		export CXX="/usr/bin/ccache/ccache ${CXX}"
-
-	# Enable new ccache for this build
-	elif [ "${FEATURES/-ccache/}" = "${FEATURES}" -a \
-	     "${FEATURES/ccache/}" != "${FEATURES}" -a \
-	     -x /usr/bin/ccache ]
-	then
-		# Build uses its own env with $PATH, etc, so
-		# we take the easy way out. (Az)
-		export CC="/usr/bin/ccache ${CC}"
-		export CXX="/usr/bin/ccache ${CXX}"
-	fi
-
-	# Enable distcc for this build (Az)
-	if [ "${FEATURES/-distcc/}" = "${FEATURES}" -a \
-	     "${FEATURES/distcc/}" != "${FEATURES}" -a \
-		 -x /usr/bin/distcc ]
-	then
-		# Do not bump ECPUS if the user did not touch it, as currently
-		# it -PP do not work properly (segfaulting). (Az)
-		[ "$(echo ${DISTCC_HOSTS} | wc -w)" -gt 1 -a "${ECPUS}" -qt 1 ] && \
-			export ECPUS="$(echo ${DISTCC_HOSTS} | wc -w)"
-
-		export CC="distcc ${CC}"
-		export CXX="distcc ${CXX}"
-	fi
-
-	# Do NOT compile with a external STLport, as gcc-2.95.3 users will
-	# get linker errors due to the ABI being different (STLport will be
-	# compiled with 2.95.3, while OO is compiled with 3.x). (Az)
-	einfo "Configuring OpenOffice.org with language support for ${LFULLNAME}..."
-	cd ${S}/config_office
-	rm -f config.cache
-	if [ "LANGNAME" != "ENUS" ]; then
-		LANGNAME="${LANGNAME},ENUS"
-	fi
-	./configure --enable-gcc3 \
-		--with-jdk-home=${JAVA_HOME} \
-		--with-lang=${LANGNAME}\
-		--with-x || die
-
-	cd ${S}
-	get_EnvSet
-
-	# Do not include /usr/include in header search path, and
-	# same thing for internal gcc include dir, as gcc3 handles
-	# it correctly by default! (Az)
-	perl -pi -e "s| -I/usr/include||g" ${LinuxEnvSet}
-#	perl -pi -e "s| -I$(gcc-libpath)/include||g" ${LinuxEnvSet}
-
-	if [ "${NEW_GCC}" -eq "1" ]
-	then
-		local gcc_path="$(/usr/sbin/gcc-config --get-bin-path ${GCC_PROFILE})"
-
-		# Setup path for new gcc layout in $LinuxEnvSet, else the build
-		# environment will not find gcc ... (Az)
-		perl -pi -e "s|PATH \.:\$SOLARVER|PATH \.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
-		# New builds start quoting stuff ...
-		perl -pi -e "s|PATH \"\.:\$SOLARVER|PATH \"\.:${gcc_path}:\$SOLARVER|" ${LinuxEnvSet}
-	fi
-
-	# Should the build use multiprocessing?
-	# We use build.pl directly, as dmake tends to segfault. (Az)
-	if [ "${ECPUS}" -gt 1 ]
-	then
-		buildcmd="${S}/solenv/bin/build.pl --all -P ${ECPUS} product=full"
-	else
-		buildcmd="${S}/solenv/bin/build.pl --all product=full"
-	fi
-
-	if [ -z "$(grep 'CCCOMP' ${S}/${LinuxEnvSet})" ]
-	then
-		# Set CCCOMP and CXXCOMP.  This is still needed for STLport
-		echo "setenv CCCOMP \"${CC}\"" >> ${S}/${LinuxEnvSet}
-		echo "setenv CXXCOMP \"${CXX}\"" >> ${S}/${LinuxEnvSet}
-	fi
-
-	if [ "$(gcc-major-version)" -eq 3 ]
-	then
-		mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/{lib,inc}
-
-		einfo "Installing GCC related libs..."
-		# Workaround for missing libs with GCC3 (thanks to Debian) (Az)
-		cd ${S}/solver/${SOLVER}/${SOLPATH}/lib
-		cp $(gcc-libpath)/libstdc++.so.$(gcc-libstdcxx-major-version)* . || \
-			die "Could not copy gcc-libs!"
-		cp $(gcc-libpath)/libgcc_s.so* . || die "Could not copy gcc-libs!"
-		cd ${S}
-	fi
-
-	einfo "Bootstrapping OpenOffice.org..."
-	# Get things ready for bootstrap (Az)
-	chmod 0755 ${S}/solenv/bin/*.pl
-	mkdir -p ${S}/solver/${SOLVER}/${SOLPATH}/inc
-	touch ${S}/solver/${SOLVER}/${SOLPATH}/inc/minormkchanged.flg
-	# Bootstrap ...
-	./bootstrap
-
-	if [ "$(gcc-major-version)" -eq 3 ]
-	then
-		local LIBFILE="$(readlink `gcc-libpath`/libstdc++.so.`gcc-libstdcxx-major-version`)"
-		local LIBVERSION="$(echo ${LIBFILE} | sed -e 's|libstdc++\.so\.||g')"
-		# Get this beast to use the right version of libstdc++ ... (Az)
-		echo "LIBSTDCPP3:=${LIBVERSION}" >> \
-			${S}/solver/${SOLVER}/${SOLPATH}/inc/comp_ver.mk
-		cd ${S}
-	fi
-
-	einfo "Building OpenOffice.org..."
-	# Setup virtualmake
-	export maketype="tcsh"
-	echo "source ${S}/${LinuxEnvSet} && cd ${S}/instsetoo && ${buildcmd}" > build.tcsh
-	# Build needs X to compile! (Az)
-	virtualmake build.tcsh || die "Build failed!"
-
-	[ -d ${S}/instsetoo/${SOLPATH} ] || die "Cannot find build directory!"
-}
-
-src_install() {
-
-	# Sandbox issues; bug #11838
-	addpredict "/user"
-	addpredict "/share"
-	addpredict "/dev/dri"
-	addpredict "/usr/bin/soffice"
-	addpredict "/pspfontcache"
-
-	# This allows us to change languages without editing the ebuild.
-	#
-	#   languages1="ENUS,FREN,GERM,SPAN,ITAL,DTCH,PORT,SWED,POL,RUSS"
-	#   languages2="DAN,GREEK,TURK,CHINSIM,CHINTRAD,JAPN,KOREAN,CZECH,CAT"
-	#
-	# Supported languages for localized help files
-	#
-	#   helplangs="ENUS,FREN,GERM,SPAN,ITAL,SWED"
-	#
-	set_languages
-
-	get_EnvSet
-
-	# The install part should now be relatively OK compared to
-	# what it was.  Basically we use autoresponse files to install
-	# unattended, running under a Xvfb if needed.  Afterwards we
-	# just cleanout ${D} from the registry, etc.  This way we
-	# do not need pre-generated registry, and also fixes some weird
-	# bugs related to the old way we did things.
-	#
-	# <azarah@gentoo.org> (9 Sep 2002)
-
-	# Autoresponse file for main installation
-	cat > ${T}/rsfile-global <<-"END_RS"
-		[ENVIRONMENT]
-		INSTALLATIONMODE=INSTALL_NETWORK
-		INSTALLATIONTYPE=STANDARD
-		DESTINATIONPATH=<destdir>
-		OUTERPATH=
-		LOGFILE=
-		LANGUAGELIST=<LANGUAGE>
-
-		[JAVA]
-		JavaSupport=preinstalled_or_none
-	END_RS
-
-	# Autoresponse file for user isntallation
-	cat > ${T}/rsfile-local <<-"END_RS"
-		[ENVIRONMENT]
-		INSTALLATIONMODE=INSTALL_WORKSTATION
-		INSTALLATIONTYPE=WORKSTATION
-		DESTINATIONPATH=<home>/.openoffice/<pv>
-
-		[JAVA]
-		JavaSupport=none
-	END_RS
-
-	# Fixing install location in response file
-	sed -e "s|<destdir>|${D}${INSTDIR}|" \
-		${T}/rsfile-global > ${T}/autoresponse
-
-	einfo "Installing OpenOffice.org into build root..."
-	dodir ${INSTDIR}
-	cd ${S}/instsetoo/${SOLPATH}/${LANGNO}/normal
-	# Setup virtualmake
-	export maketype="./setup"
-	# We need X to install...
-	virtualmake "-v -r:${T}/autoresponse" ||die
-
-	echo
-	einfo "Removing build root from registry..."
-	# Remove totally useless stuff.
-	rm -f ${D}${INSTDIR}/program/{setup.log,sopatchlevel.sh}
-	# Remove build root from registry and co
-	egrep -rl "${D}" ${D}${INSTDIR}/* | \
-		xargs -i perl -pi -e "s|${D}||g" {} || :
-
-	einfo "Fixing permissions..."
-	# Fix permissions
-	find ${D}${INSTDIR}/ -type f -exec chmod a+r {} \;
-	chmod a+x ${D}${INSTDIR}/share/config/webcast/*.pl
-
-	# Fix symlinks
-	for x in "soffice program/spadmin" \
-		"program/setup setup" \
-		"program/spadmin spadmin"
-	do
-		dosym $(echo ${x} | awk '{print $1}') \
-			${INSTDIR}/$(echo ${x} | awk '{print $2}')
-	done
-
-	# Install user autoresponse file
-	insinto /etc/openoffice
-	sed -e "s|<pv>|${PV//_rc3/.0}|g" ${T}/rsfile-local > ${T}/autoresponse-${PV}.conf
-	doins ${T}/autoresponse-${PV}.conf
-
-	# Install wrapper script
-	exeinto /usr/bin
-	sed -e "s|<pv>|${PV}|g" \
-		${FILESDIR}/${PV}/ooffice-wrapper-1.3 > ${T}/ooffice
-	doexe ${T}/ooffice
-	# Component symlinks
-	dosym ooffice /usr/bin/oocalc
-	dosym ooffice /usr/bin/oodraw
-	dosym ooffice /usr/bin/ooimpress
-	dosym ooffice /usr/bin/oomath
-	dosym ooffice /usr/bin/oowriter
-	dosym ooffice /usr/bin/ooweb
-	dosym ooffice /usr/bin/oosetup
-	dosym ooffice /usr/bin/oopadmin
-
-	einfo "Installing Menu shortcuts (need \"gnome\" or \"kde\" in USE)..."
-	if [ -n "`use gnome`" ]
-	then
-		insinto /usr/share/gnome/apps/OpenOffice.org
-		# Install the files needed for the catagory
-		doins ${D}${INSTDIR}/share/gnome/net/.directory
-		doins ${D}${INSTDIR}/share/gnome/net/.order
-
-		for x in ${D}${INSTDIR}/share/gnome/net/*.desktop
-		do
-			# We have to handle setup differently
-			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
-			# Now fix the rest
-			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
-			doins ${x}
-		done
-	fi
-
-	if [ -n "`use kde`" ]
-	then
-		local kdeloc="${D}${INSTDIR}/share/kde/net/"
-
-		insinto /usr/share/applnk/OpenOffice.org\ 1.1
-		# Install the files needed for the catagory
-		doins ${kdeloc}/.directory
-		dodir /usr/share
-		# Install the icons and mime info
-		cp -a ${D}${INSTDIR}/share/kde/net/share/mimelnk ${D}${INSTDIR}/share/kde/net/share/icons ${D}/usr/share
-
-		for x in ${kdeloc}/*.desktop
-		do
-			# We have to handle setup differently
-			perl -pi -e "s:${INSTDIR}/program/setup:/usr/bin/oosetup:g" ${x}
-			# Now fix the rest
-			perl -pi -e "s:${INSTDIR}/program/s:/usr/bin/oo:g" ${x}
-			doins ${x}
-		done
-	fi
-
-	# Unneeded, as they get installed into /usr/share...
-	# They are needed else user installation fails.
-#	rm -rf ${D}${INSTDIR}/share/{cde,gnome,kde}
-	rm -rf ${D}${INSTDIR}/share/cde
-#
-#	for f in ${D}/usr/share/gnome/apps/OpenOffice.org/* ; do
-#		echo 'Categories=Application;Office;' >> ${f}
-#	done
-
-	# Make sure these do not get nuked.
-	keepdir ${INSTDIR}/user/registry/res/en-us/org/openoffice/{Office,ucb}
-	keepdir ${INSTDIR}/user/psprint/{driver,fontmetric}
-	keepdir ${INSTDIR}/user/{autocorr,backup,plugin,store,temp,template}
-}
-
-pkg_postinst() {
-
-	einfo "******************************************************************"
-	einfo " To start OpenOffice.org, run:"
-	einfo
-	einfo "   $ ooffice"
-	einfo
-	einfo " Also, for individual components, you can use any of:"
-	einfo
-	einfo "   oocalc, oodraw, ooimpress, oomath, ooweb or oowriter"
-	einfo
-	einfo " If the fonts appear garbled in the user interface refer to "
-	einfo " Bug 8539, or http://www.openoffice.org/FAQs/fontguide.html#8"
-	einfo
-	einfo "******************************************************************"
-}
-