diff options
Diffstat (limited to 'net-firewall/shorewall/files/4.5.21.9')
4 files changed, 162 insertions, 0 deletions
diff --git a/net-firewall/shorewall/files/4.5.21.9/shorewall.confd b/net-firewall/shorewall/files/4.5.21.9/shorewall.confd new file mode 100644 index 000000000000..e5957167b5b9 --- /dev/null +++ b/net-firewall/shorewall/files/4.5.21.9/shorewall.confd @@ -0,0 +1,15 @@ +# Global start/restart/stop options +# +OPTIONS="" + +# Start options +# +STARTOPTIONS="" + +# Stop options +# +STOPOPTIONS="" + +# Restart options +# +RESTARTOPTIONS="" diff --git a/net-firewall/shorewall/files/4.5.21.9/shorewall.initd b/net-firewall/shorewall/files/4.5.21.9/shorewall.initd new file mode 100644 index 000000000000..f58978cc2cd3 --- /dev/null +++ b/net-firewall/shorewall/files/4.5.21.9/shorewall.initd @@ -0,0 +1,107 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-firewall/shorewall/files/4.5.21.9/shorewall.initd,v 1.1 2014/04/26 09:29:56 hwoarang Exp $ + +description='The Shoreline Firewall, more commonly known as "Shorewall", is' +description="${description} a high-level tool for configuring Netfilter." + +extra_commands="check clear" +extra_started_commands="refresh reset" + +description_check="Checks if the configuration will compile or not." + +description_clear="Clear will remove all rules and chains installed by" +description_clear="${description_clear} Shorewall. The firewall is then" +description_clear="${description_clear} wide open and unprotected." + +description_refresh="The mangle table will be refreshed along with the" +description_refresh="${description_refresh} blacklist chain (if any)." + +description_reset="All the packet and byte counters in the firewall are reset." + +depend() { + need net + provide firewall + after ulogd +} + +status() { + local _retval + /sbin/shorewall status 1>/dev/null + _retval=$? + if [ ${_retval} = '0' ]; then + einfo 'status: started' + mark_service_started "${SVCNAME}" + return 0 + else + einfo 'status: stopped' + mark_service_stopped "${SVCNAME}" + return 3 + fi +} + +start() { + ebegin "Starting shorewall" + /sbin/shorewall ${OPTIONS} start ${STARTOPTIONS} 1>/dev/null + eend $? +} + +stop() { + ebegin "Stopping shorewall" + /sbin/shorewall ${OPTIONS} stop ${STOPOPTIONS} 1>/dev/null + eend $? +} + +restart() { + # shorewall comes with its own control script that includes a + # restart function, so refrain from calling svc_stop/svc_start + # here. Note that this comment is required to fix bug 55576; + # runscript.sh greps this script... (09 Jul 2004 agriffis) + + ebegin "Restarting shorewall" + /sbin/shorewall status 1>/dev/null + if [ $? != 0 ] ; then + svc_start + else + /sbin/shorewall ${OPTIONS} restart ${RESTARTOPTIONS} 1>/dev/null + fi + eend $? +} + +clear() { + # clear will remove all the rules and bring the system to an unfirewalled + # state. (21 Nov 2004 eldad) + + ebegin "Clearing all shorewall rules and setting policy to ACCEPT" + /sbin/shorewall ${OPTIONS} clear 1>/dev/null + eend $? +} + +reset() { + # reset the packet and byte counters in the firewall + + ebegin "Resetting the packet and byte counters in shorewall" + /sbin/shorewall ${OPTIONS} reset 1>/dev/null + eend $? +} + +refresh() { + # refresh the rules involving the broadcast addresses of firewall + # interfaces, the black list, traffic control rules and + # ECN control rules + + ebegin "Refreshing shorewall rules" + /sbin/shorewall ${OPTIONS} refresh 1>/dev/null + eend $? +} + +check() { + # perform cursory validation of the zones, interfaces, hosts, rules + # and policy files. CAUTION: does not parse and validate the generated + # iptables commands. + + ebegin "Checking shorewall configuration" + /sbin/shorewall ${OPTIONS} check 1>/dev/null + eend $? +} diff --git a/net-firewall/shorewall/files/4.5.21.9/shorewall.systemd b/net-firewall/shorewall/files/4.5.21.9/shorewall.systemd new file mode 100644 index 000000000000..db278fd54585 --- /dev/null +++ b/net-firewall/shorewall/files/4.5.21.9/shorewall.systemd @@ -0,0 +1,17 @@ +# +# The Shoreline Firewall (Shorewall) Packet Filtering Firewall - V4.5 +# +[Unit] +Description=Shorewall IPv4 firewall +Documentation=man:shorewall(8) http://www.shorewall.net/Documentation_Index.html +After=network.target + +[Service] +Type=oneshot +RemainAfterExit=yes +EnvironmentFile=/etc/conf.d/shorewall +ExecStart=/sbin/shorewall $OPTIONS start $STARTOPTIONS +ExecStop=/sbin/shorewall $OPTIONS stop $STOPOPTIONS + +[Install] +WantedBy=multi-user.target diff --git a/net-firewall/shorewall/files/4.5.21.9/shorewallrc b/net-firewall/shorewall/files/4.5.21.9/shorewallrc new file mode 100644 index 000000000000..46f5eb9a3603 --- /dev/null +++ b/net-firewall/shorewall/files/4.5.21.9/shorewallrc @@ -0,0 +1,23 @@ +# +# Gentoo Shorewall 4.5 rc file +# +BUILD= #Default is to detect the build system +HOST=gentoo #Gentoo GNU Linux +PREFIX=@GENTOO_PORTAGE_EPREFIX@/usr #Top-level directory for shared files, libraries, etc. +SHAREDIR=${PREFIX}/share #Directory for arch-neutral files. +LIBEXECDIR=${PREFIX}/share #Directory for executable scripts. +PERLLIBDIR=${PREFIX}/share/shorewall #Directory to install Shorewall Perl module directory +CONFDIR=@GENTOO_PORTAGE_EPREFIX@/etc #Directory where subsystem configurations are installed +SBINDIR=@GENTOO_PORTAGE_EPREFIX@/sbin #Directory where system administration programs are installed +MANDIR=${PREFIX}/share/man #Directory where manpages are installed. +INITDIR=${CONFDIR}/init.d #Directory where SysV init scripts are installed. +INITFILE=${PRODUCT} #Name of the product's installed SysV init script +INITSOURCE=init.gentoo.sh #Name of the distributed file to be installed as the SysV init script +ANNOTATED= #If non-zero, annotated configuration files are installed +SYSTEMD=@GENTOO_PORTAGE_EPREFIX@/usr/lib/systemd/system #Directory where .service files are installed (systems running systemd only) +SERVICEFILE=gentoo.service #Name of the distributed file to be installed as systemd service file +SYSCONFFILE=default.gentoo #Name of the distributed file to be installed in $SYSCONFDIR +SYSCONFDIR=${CONFDIR}/conf.d #Directory where SysV init parameter files are installed +SPARSE= #If non-empty, only install $PRODUCT/$PRODUCT.conf in $CONFDIR +VARLIB=@GENTOO_PORTAGE_EPREFIX@/var/lib #Directory where product variable data is stored. +VARDIR=${VARLIB}/${PRODUCT} #Directory where product variable data is stored. |