www-servers/varnish: remove unused files

Signed-off-by: Anthony G. Basile <blueness@gentoo.org>

3 files changed, 0 insertions, 143 deletions

diff --git a/www-servers/varnish/files/varnishd.confd-r3 b/www-servers/varnish/files/varnishd.confd-r3
deleted file mode 100644
index c05b8fb7521c..000000000000
--- a/www-servers/varnish/files/varnishd.confd-r3
+++ /dev/null
@@ -1,22 +0,0 @@
-# /etc/conf.d/varnishd
-
-VARNISHD="/usr/sbin/varnishd"
-VARNISHADM="/usr/bin/varnishadm"
-
-#CONFIGFILES="/etc/varnish/${SVCNAME}.vcl"
-CONFIGFILE="/etc/varnish/default.vcl"
-
-# Listen on 127.0.0.1:8080 and connect to backend 127.0.0.1:80
-#VARNISHD_OPTS="-a 127.0.0.1:8080 -a 127.0.0.1:8080"
-
-# Alternatively, don't listen to a backend
-VARNISHD_OPTS="-a 127.0.0.1:8080"
-
-
-# User/Group
-VARNISHD_OPTS="${VARNISHD_OPTS} -u varnish -g varnish"
-
-# You may need to increase the number of open files (-n)
-# and the maximum amount off locked memory (-l)
-# See bug #459142
-#rc_ulimit="-n 32786 -l 82000"
diff --git a/www-servers/varnish/files/varnishd.initd-r3 b/www-servers/varnish/files/varnishd.initd-r3
deleted file mode 100644
index ff8eaf691ea3..000000000000
--- a/www-servers/varnish/files/varnishd.initd-r3
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-VARNISHD_PID=${VARNISHD_PID:-/run/${SVCNAME}.pid}
-CONFIGFILES="${CONFIGFILE:-/etc/varnish/default.vcl}"
-
-command="${VARNISHD:-/usr/sbin/varnishd}"
-command_args="-P ${VARNISHD_PID} -f ${CONFIGFILE} ${VARNISHD_OPTS}"
-pidfile="${VARNISHD_PID}"
-
-extra_commands="configtest"
-extra_started_commands="reload"
-
-description_configtest="Run syntax tests for configuration files."
-description_reload="Reloads the configuration."
-
-depend() {
-	need net
-}
-
-configtest() {
-	ebegin "Checking ${SVCNAME} configuration"
-	checkconfig
-	eend $?
-}
-
-checkconfig() {
-	${VARNISHD} -C -f ${CONFIGFILE} >/dev/null 2>&1
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		eerror "${SVCNAME} has detected an error in your setup:"
-		${VARNISHD} -C -f ${CONFIGFILE}
-	fi
-
-	return $ret
-}
-
-start_pre() {
-	checkconfig || return 1
-}
-
-stop_pre() {
-	if [ "${RC_CMD}" = "restart" ]; then
-		checkconfig || return 1
-	fi
-}
-
-reload() {
-	checkconfig || return 1
-
-	ebegin "Reloading varnish"
-
-	$VARNISHADM vcl.list >/dev/null 2>&1
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		eerror "${SVCNAME} cannot list configuration"
-		return 1
-	fi
-
-	new_config="reload_$(date +%FT%H:%M:%S)"
-	$VARNISHADM vcl.load $new_config $CONFIGFILE >/dev/null 2>&1
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		eerror "${SVCNAME} cannot load configuration"
-		return 1
-	fi
-
-	$VARNISHADM vcl.use $new_config >/dev/null 2>&1
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		eerror "${SVCNAME} cannot switch configuration"
-		return 1
-	fi
-
-	eend 0
-}
diff --git a/www-servers/varnish/files/varnishncsa.initd-r1 b/www-servers/varnish/files/varnishncsa.initd-r1
deleted file mode 100644
index 8a584decc965..000000000000
--- a/www-servers/varnish/files/varnishncsa.initd-r1
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-VARNISHNCSA_PID=${VARNISHNCSA_PID:-/run/${SVCNAME}.pid}
-
-command="${VARNISHNCSA:-/usr/bin/varnishncsa}"
-command_args="-D -P ${VARNISHNCSA_PID} ${VARNISHNCSA_OPTS}"
-pidfile="${VARNISHNCSA_PID}"
-
-extra_started_commands="reload rotate flush"
-
-description_rotate="Rotate the log file"
-description_flush="Flush any outstanding transactions"
-
-# We need to make sure varnishd has started first, bug #524284
-start_pre() {
-	TIMEOUT=${TIMEOUT:-5}
-
-	local i=0
-	while [ $i -lt ${TIMEOUT} ]; do
-		echo status | varnishadm 2>/dev/null | grep -q "Child in state running"
-		test $? -eq 0  && break
-
-		sleep 1 && i=$(expr $i + 1)
-	done
-}
-
-rotate() {
-	ebegin "Rotating log file"
-	start-stop-daemon -p ${VARNISHNCSA_PID} -s SIGHUP
-	eend $?
-}
-
-flush() {
-	ebegin "Flushing any outstanding transactions"
-	start-stop-daemon -p ${VARNISHNCSA_PID} -s SIGUSR1
-	eend $?
-}
-
-reload() {
-	flush
-	rotate
-}