# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/dev-util/subversion/subversion-1.0.4-r1.ebuild,v 1.9 2004/09/03 16:53:53 pvdabeel Exp $

inherit elisp-common libtool python eutils

DESCRIPTION="A compelling replacement for CVS"
SRC_URI="http://subversion.tigris.org/tarballs/${P}.tar.bz2"
HOMEPAGE="http://subversion.tigris.org/"

SLOT="0"
LICENSE="Apache-1.1"
KEYWORDS="x86 sparc ppc amd64 alpha hppa"
IUSE="ssl apache2 berkdb python emacs perl java"

S=${WORKDIR}/${PN}-${PV}

#Allow for custion repository locations
if [ "${SVN_REPOS_LOC}x" = "x" ]; then
	SVN_REPOS_LOC="/var/svn"
fi

#
#
# Note that to disable the server part of subversion you need to specify
# USE="-berkdb" emerge subversion.
#
#

RDEPEND="python? ( >=dev-lang/python-2.0 )
	apache2? ( >=net-www/apache-2.0.48 )
	!apache2? ( !>=net-www/apache-2* )
	!dev-libs/apr
	python? ( || ( >=dev-lang/swig-1.3.21
			=dev-lang/swig-1.3.19
	) )
	perl? ( !python? ( || ( >=dev-lang/swig-1.3.21
			=dev-lang/swig-1.3.19
		) )
		>=dev-lang/perl-5.8 )
	>=net-misc/neon-0.24.4
	berkdb? ( =sys-libs/db-4*
		java? ( virtual/jdk ) )
	emacs? ( virtual/emacs )"

DEPEND="${RDEPEND}
	|| (
		>=sys-devel/autoconf-2.59
		=sys-devel/autoconf-2.57*
	)
	!=sys-devel/autoconf-2.58"

pkg_setup() {
	if has_version =sys-devel/autoconf-2.58*; then
		die "Subversion WILL NOT BUILD with autoconf-2.58"
	fi

	if use berkdb && has_version '<dev-util/subversion-0.34.0' && [ "${SVN_DUMPED}" == "" ]; then
		einfo ""
		ewarn ":  Now you have $(best_version subversion)"
		ewarn " Subversion has changed the repository filesystem schema from 0.34.0."
		ewarn " So you MUST dump your repositories before upgrading."
		ewarn ""
		ewarn "After doing so call emerge with SVN_DUMPED=1 emerge !!"
		einfo ""
		einfo "More details on dumping:"
		einfo "http://svn.collab.net/repos/svn/trunk/notes/repos_upgrade_HOWTO"
		die "ensure that you dump your repository first"
	fi

	if use apache2; then
		einfo "The apache2 subversion module will be built, and libapr from the"
		einfo "apache package will be used instead of the included."
	else
		einfo "Please note that subversion and apache2 cannot be installed"
		einfo "simultaneously without specifying the apache2 use flag. This is"
		einfo "because subversion installs its own libapr and libapr-util in that"
		einfo "case. Specifying the apache2 useflag will also enable the building of"
		einfo "the apache2 module."
	fi
}

src_unpack() {
	cd ${WORKDIR}
	unpack ${PN}-${PV}.tar.bz2
	cd ${S}

	epatch ${FILESDIR}/subversion-db4.patch
	epatch ${FILESDIR}/${PN}-pre-1.0.5.patch

	export WANT_AUTOCONF_2_5=1
	elibtoolize
	autoconf
	(cd apr; autoconf)
	(cd apr-util; autoconf)
	sed -i -e 's,\(subversion/svnversion/svnversion\)\(>.*svn-revision.txt\),echo "external" \2,' Makefile.in
}

src_compile() {
	local myconf

	cd ${S}
	use ssl && myconf="${myconf} --with-ssl"
	use ssl || myconf="${myconf} --without-ssl"

	use apache2 && myconf="${myconf} --with-apxs=/usr/sbin/apxs2 \
		--with-apr=/usr --with-apr-util=/usr"
	use apache2 || myconf="${myconf} --without-apxs"

	use berkdb && myconf="${myconf} --with-berkeley-db"
	use berkdb || myconf="${myconf} --without-berkeley-db"

	use python && myconf="${myconf} --with-python=/usr/bin/python --with-swig"
	use python || myconf="${myconf} --without-python --without-swig"

	econf ${myconf} \
		--with-neon=/usr \
		--disable-experimental-libtool \
		--disable-mod-activation ||die "configuration failed"


	# build subversion, but do it in a way that is safe for paralel builds
	# Also apparently the included apr does have a libtool that doesn't like
	# -L flags. So not specifying it at all when not building apache modules
	# and only specify it for internal parts otherwise
	if use apache2; then
		( emake external-all && emake LT_LDFLAGS="-L${D}/usr/lib" local-all ) || die "make of subversion failed"
	else
		( emake external-all && emake local-all ) || die "make of subversion failed"
	fi

	#building fails without the apache apr-util as includes are wrong.
	#Also the python bindings do not work without db installed
	if use berkdb; then
		if use python; then
			if use apache2; then
				emake swig-py || die "subversion python bindings failed"
			else
				emake SVN_APR_INCLUDES="-I${S}/apr/include -I${S}/apr-util/include" swig-py || die "subversion python bindings failed"
			fi
		fi
		if use perl; then
			make swig-pl-lib || die "Perl library building failed"
			cd subversion/bindings/swig/perl
			APR_CONFIG=/usr/bin/apr-config DESTDIR=${D} perl Makefile.PL
			make all
			cd ${S}
		fi
		if use java; then
			cd ${S}/subversion/bindings/java/javahl
			WANT_AUTOMAKE=1.6 WANT_AUTOCONF=2.53 ./autogen.sh
			use apache2 && myconfj="--with-apxs=/usr/sbin/apxs2 \
				--with-apr=/usr --with-apr-util=/usr"
			use apache2 || myconfj=""
			econf ${myconfj} || die "Configuration failed"
			make || die "Compilation failed"
			cd ${S}
		fi
	fi
	cd ${S}
	if use emacs; then
		einfo "compiling emacs support"
		elisp-compile ${S}/contrib/client-side/psvn/psvn.el || die "emacs modules failed"
		elisp-compile ${S}/contrib/client-side/vc-svn.el || die "emacs modules failed"
	fi
}


src_install () {
	use apache2 && mkdir -p ${D}/etc/apache2/conf

	python_version
	PYTHON_DIR=/usr/lib/python${PYVER}

	make DESTDIR=${D} install || die "Installation of subversion failed"
	if [ -e ${D}/usr/lib/apache2 ]; then
		if has_version '>=net-www/apache-2.0.48-r2'; then
			mv ${D}/usr/lib/apache2/modules ${D}/usr/lib/apache2-extramodules
			rmdir ${D}/usr/lib/apache2
		else
			mv ${D}/usr/lib/apache2 ${D}/usr/lib/apache2-extramodules
		fi
	fi

	if use berkdb; then
		dobin svn-config
		if use python; then
			make install-swig-py DESTDIR=${D} DISTUTIL_PARAM=--prefix=${D}  LD_LIBRARY_PATH="-L${D}/usr/lib" || die "Installation of subversion python bindings failed"
			# install cvs2svn
			dobin tools/cvs2svn/cvs2svn.py
			mv ${D}/usr/bin/cvs2svn.py ${D}/usr/bin/cvs2svn
			doman tools/cvs2svn/cvs2svn.1

			# move python bindings
			mkdir -p ${D}${PYTHON_DIR}/site-packages
			cp -r tools/cvs2svn/rcsparse ${D}${PYTHON_DIR}/site-packages
			mv ${D}/usr/lib/svn-python/svn ${D}${PYTHON_DIR}/site-packages
			mv ${D}/usr/lib/svn-python/libsvn ${D}${PYTHON_DIR}/site-packages
			rmdir ${D}/usr/lib/svn-python
		fi
		if use perl; then
			make DESTDIR=${D} install-swig-pl-lib || die "Perl library building failed"
			cd subversion/bindings/swig/perl
			make DESTDIR=${D} install
			cd ${S}
		fi
		if use java; then
			cd ${S}/subversion/bindings/java/javahl
			make DESTDIR="${D}" install || die "installation failed"
			cd ${S}
		fi
	fi

	dodoc BUGS COMMITTERS COPYING HACKING INSTALL README
	dodoc CHANGES
	dodoc tools/xslt/svnindex.css tools/xslt/svnindex.xsl

	# install documentation
	docinto notes
	for f in notes/*
	do
		[ -f ${f} ] && dodoc ${f}
	done

	cd ${S}
	echo "installing html book"
	dohtml -r doc/book/book/book.html doc/book/book/styles.css doc/book/book/images

	# install emacs lisps
	if use emacs; then
		insinto /usr/share/emacs/site-lisp/subversion
		doins contrib/client-side/psvn/psvn.el*
		doins  contrib/client-side/vc-svn.el*

		elisp-site-file-install ${FILESDIR}/70svn-gentoo.el
	fi



	#Install apache module config
	if useq apache2 && useq berkdb; then
		mkdir -p ${D}/etc/apache2/conf/modules.d
		cat <<EOF >${D}/etc/apache2/conf/modules.d/47_mod_dav_svn.conf
<IfDefine SVN>
	<IfModule !mod_dav_svn.c>
		LoadModule dav_svn_module	extramodules/mod_dav_svn.so
	</IfModule>
	<Location /svn/repos>
		DAV svn
		SVNPath ${SVN_REPOS_LOC}/repos
		AuthType Basic
		AuthName "Subversion repository"
		AuthUserFile ${SVN_REPOS_LOC}/conf/svnusers
		Require valid-user
	</Location>
</IfDefine>
EOF
	fi
}

pkg_postinst() {

	use emacs && elisp-site-regen
	if use berkdb; then
		if use apache2; then
			einfo "Subversion has multiple server types. To enable the http based version"
			einfo "you must edit /etc/conf.d/apache2 to include both \"-D DAV\" and \"-D SVN\""
			einfo ""
		fi
		einfo "A repository needs to be created using the \"ebuild <path to ${PVR}.ebuild> config\" command"
		einfo "or using svnadmin (see man svnadmin) if this subversion install is used as server"
		einfo ""
		einfo "If you upgraded from an older version of berkely db and experience"
		einfo "problems with your repository then run the following command:"
		einfo "    su apache -c \"db4_recover -h /path/to/repos\""

		if use apache2; then
			einfo ""
			einfo "To allow web access a htpasswd file needs to be created using the"
			einfo "following command:"
			einfo "   htpasswd2 -m -c ${SVN_REPOS_LOC}/conf/svnusers USERNAME"
		fi

	else
		einfo "Your subversion is client only as the server is only build when"
		einfo "the berkdb flag is set"
	fi
}

pkg_postrm() {
	has_version virtual/emacs && elisp-site-regen
}

pkg_config() {
	if [ ! -x /usr/bin/svnadmin ]; then
		die "You seem to only have build the subversion client"
	fi
	einfo ">>> Initializing the database in ${SVN_REPOS_LOC}..."
	if [ -f ${SVN_REPOS_LOC}/repos ] ; then
		echo "A subversion repository already exists and I will not overwrite it."
		echo "Delete ${SVN_REPOS_LOC}/repos first if you're sure you want to have a clean version."
	else
		mkdir -p ${SVN_REPOS_LOC}/conf
		einfo ">>> Populating repository directory ..."
		# create initial repository
		/usr/bin/svnadmin create ${SVN_REPOS_LOC}/repos

		einfo ">>> Setting repository permissions ..."
		chown -Rf apache:apache ${SVN_REPOS_LOC}/repos
		chmod -Rf 755 ${SVN_REPOS_LOC}/repos
	fi
}